DÉTERMINATION DU DÉBIT DES PUITS INCOMPLETS DE NAPPES LIBRES FONCÉS EN TERRAIN ISOTROPE ET ANISOTROPE

ABSTRACT

In this paper, the author relies on Darcy's law and on an hypothesis formulated from experimental considerations to establish a semi-empirical formula for the calculation of the discharge of partially penetrating wells of free aquifer sunk in isotropic soils.

This relatively simple relation applied to 27 cases studied under an experimental design or numerical computations, reveals itself to have an unexpected accuracy.

Starting from previous formula, the author establishes another one for partially penetrating wells bored in anisotropic soils.     

The dynamics of natural pipe hydrological behaviour in blanket peat

Natural soil pipes are found in peatlands, but little is known about their hydrological role. This paper presents the most complete set of pipe discharge data to date from a deep blanket peatland in Northern England. In a 17.4‐ha catchment, we identified 24 perennially flowing and 60 ephemerally flowing pipe outlets. Eight pipe outlets along with the catchment outlet were continuously gauged over an 18‐month period. The pipes in the catchment were estimated to produce around 13.7% of annual streamflow, with individual pipes often producing large peak flows (maximum peak of 3.8 l s^?1). Almost all pipes, whether ephemerally or perennially flowing, shallow or deep (outlets > 1 m below the peat surface), showed increased discharge within a mean of 3 h after rainfall commencement and were dominated by stormflow, indicating good connectivity between the peatland surface and the pipes. However, almost all pipes had a longer period between the hydrograph peak and the return to base flow compared with the stream (mean of 23.9 h for pipes, 19.7 h for stream). As a result, the proportion of streamflow produced by the pipes at any given time increased at low flows and formed the most important component of stream discharge for the lowest 10% of flows. Thus, a small number of perennially flowing pipes became more important to the stream system under low‐flow conditions and probably received water via matrix flow during periods between storms. Given the importance of pipes to streamflow in blanket peatlands, further research is required into their wider role in influencing stream water chemistry, water temperature and fluvial carbon fluxes, as well as their role in altering local hydrochemical cycling within the peat mass itself. Enhanced piping within peatlands caused by environmental change may lead to changes in the streamflow regime with larger low flows and more prolonged drainage of the peat. Copyright © 2012 John Wiley & Sons, Ltd.     

Validation of methods to estimate design discharge flow rates for dam spillways with large regulating capacity

Abstract

The estimation and review of discharge flow rates in hydraulic works is a fundamental problem in water management. In the case of dams with large regulating capacity, in order to estimate return periods of discharge flow rates from the spillways, it becomes necessary to consider both peak flow and volume of the incoming floods. In this paper, the results of the validation for several methods of assessing design floods for spillways of dams with a large flood control capacity are presented; the validation is performed by comparing the maximum outflows (or the maximum levels reached in the reservoir) obtained from the routing of the design floods with those obtained from the routing of the historical annual maximum floods. The basin of Malpaso Dam, Mexico, is used as the case study.

Editor D. Koutsoyiannis

Citation Domínguez, M.R. and Arganis, J.M.L., 2012. Validation of methods to estimate design discharge flow rates for dam spillways with large regulating capacity. Hydrological Sciences Journal, 57 (3), 460–478.     

Reach-scale suspended sediment balance downstream from dams in a large Mediterranean river

Abstract

This paper presents a reach-scale sediment balance of a large impounded Mediterranean river (the lower Ebro, 1998–2008). Multi-temporal sediment storage and the influence of floods and tributaries on the sediment load were examined using continuous discharge and turbidity records. The mean annual suspended sediment load at the reach outlet (Xerta) is 0.12?×?10⁶ t, corroborating previous results. Suspended sediment concentrations were low (SSC_mean?=?13 mg L^-1), attaining a maximum of 274 mg L^-1. Erosion processes (channel-scour, bank erosion) are dominant, and net export of sediment occurs over the long term. Unexpectedly, ephemeral tributaries were found to contribute significantly: sediment delivered during torrential events attained 5% of the Ebro annual load, and was even larger than that in flushing flows. Overall, most of the suspended sediment load is transported by floods (up to 65% in some years). The results constitute basic information to underpin current management actions aiming to achieve the sustainability of the riverine and deltaic system.

Editor D. Koutsoyiannis; Associate editor D. Hughes

Citation Tena, A., Batalla, R.J. and Vericat, D., 2012. Reach-scale suspended sediment balance downstream from dams in a large Mediterranean river. Hydrological Sciences Journal, 57 (5), 831–849.     

Electromagnetic induction prediction of soil salinity and groundwater properties in a Tunisian Saharan oasis

Abstract

Electromagnetic induction measurements (EM) were taken in a saline gypsiferous soil of the Saharan-climate Fatnassa oasis (Tunisia) to predict the electrical conductivity of saturated soil extract (ECe) and shallow groundwater properties (depth, Dgw, and electrical conductivity, ECgw) using various models. The soil profile was sampled at 0.2 m depth intervals to 1.2 m for physical and chemical analysis. The best input to predict the log-transformed soil salinity (lnECe) in surface (0–0.2 m) soil was the EMh/EMv ratio. For the 0–0.6 m soil depth interval, the performance of multiple linear regression (MLR) models to predict lnECe was weaker using data collected over various seasons and years (R _a ² = 0.66 and MSE = 0.083 dS m^-1) as compared to those collected during the same period (R _a ² = 0.97, MSE = 0.007 dS m^-1). For similar seasonal conditions, for the Dgw–EMv relationship, R ² was 0.88 and the MSE was 0.02 m for Dgw prediction. For a validation subset, the R ² was 0.85 and the MSE was 0.03 m. Soil salinity was predicted more accurately when groundwater properties were used instead of soil moisture with EM variables as input in the MLR.

Editor D. Koutsoyiannis; Associate editor K. Heal

Citation Bouksila, F., Persson, M., Bahri, A., and Berndtsson, R., 2012. Electromagnetic induction predictions of soil salinity and groundwater properties in a Tunisian Saharan oasis. Hydrological Sciences Journal, 57 (7), 1473–1486.     

Hydrological characteristics of vegetated river flows: a laboratory flume study

Abstract

Laboratory flume experiments were undertaken to measure the vertical profiles of mean flow velocity for three different flow discharges and four different stem densities of Hydrilla verticillata. The data were used to calculate three parameters, namely Manning's roughness coefficient, the Reynolds number and the Froude number. In addition, empirical equations were obtained for the vertical distribution of measured flow velocity within the transitional zone and above the plant canopy. The results show that: (a) the vertical distribution of measured flow velocity exhibits three zone profiles; (b) Manning's roughness coefficient decreases with increasing depth-averaged flow velocity; (c) the relationship between Manning's roughness coefficient and the depth-averaged flow velocity is within the smooth left inverse curve; (d) Manning's roughness coefficient significantly changes with increasing density of Hydrilla; (e) the Froude number is independent of the density of Hydrilla; and (f) both the Reynolds number and the Froude number increase with increasing depth-averaged flow velocity.

Citation Shi, J.Z., Li, Y.-H., Hughes, J.M.R., and Zhao, M., 2013. Hydrological characteristics of vegetated river flows: a laboratory flume study. Hydrological Sciences Journal, 58 (5), 1047–1058.

Editor Z.W. Kundzewicz     

Characteristics of beaver ponds on deltas in a mountain environment

Many beaver ponds in the Rocky Mountains, that have been described in the literature, are in‐channel ponds that are relatively small and short‐lived. This paper describes floodplain beaver ponds on low‐gradient deltas in glacial finger lakes in Glacier National Park, Montana. These ponds are distinctly larger, probably fed by hyporheic flow, and stable and long‐lived. Ponds examined were, with one exception, 44 years old. Glacial discharge is present in each valley where beaver ponds occupy low‐gradient deltas, and this discharge likely sustains pond water level over the course of the summer. As glaciers recede and disappear, deltaic beaver ponds dependent on hyporheic flow may be negatively affected. Copyright © 2012 John Wiley & Sons, Ltd.     

Geographical information system approaches for hazard mapping of dilute lahars on Montserrat, West Indies

Many research tools for lahar hazard assessment have proved wholly unsuitable for practical application to an active volcanic system where field measurements are challenging to obtain. Two simple routing models, with minimal data demands and implemented in a geographical information system (GIS), were applied to dilute lahars originating from Soufrière Hills Volcano, Montserrat. Single-direction flow routing by path of steepest descent, commonly used for simulating normal stream-flow, was tested against LAHARZ, an established lahar model calibrated for debris flows, for ability to replicate the main flow routes. Comparing the ways in which these models capture observed changes, and how the different modelled paths deviate can also provide an indication of where dilute lahars, do not follow behaviour expected from single-phase flow models. Data were collected over two field seasons and provide (1) an overview of gross morphological change after one rainy season, (2) details of dominant channels at the time of measurement, and (3) order of magnitude estimates of individual flow volumes. Modelling results suggested both GIS-based predictive tools had associated benefits. Dominant flow routes observed in the field were generally well-predicted using the hydrological approach with a consideration of elevation error, while LAHARZ was comparatively more successful at mapping lahar dispersion and was better suited to long-term hazard assessment. This research suggests that end-member models can have utility for first-order dilute lahar hazard mapping.     

An Appraisal of the 2001 Bhuj Earthquake (Mw 7.7, India) Source Zone: Fractal Dimension and b Value Mapping of the Aftershock Sequence

We examined seismic characteristics, b value and fractal dimension of the aftershock sequence of the January 26, 2001 Bhuj earthquake (Mw 7.7) that occurred in the Kutch failed rift basin, western margin of the Stable Continental Region (SCR) of India. A total of about 2,000 events (M?≥?2.0) were recorded within two and a half months, immediately after the main shock. Some 795 events were precisely relocated by simultaneous inversion. These relocated events are used for mapping the frequency-magnitude relation (b value) and fractal correlation dimension (Dc) to understand the seismic characteristics of the aftershocks and the source zone of the main shock. The surface maps of the b value and Dc reveal two distinct tectonic arms or zones of the V-shaped aftershock area, western zone and eastern zone. The b value is relatively higher (~1.6) in the western zone compared to a lower value (~1.4) in the eastern zone. The Dc map also shows a higher value (1.2–1.35) in the western zone compared to a lower Dc (0.80–1.15) in the eastern zone; this implies a positive correlation between Dc and b value. Two cross sections, E–W and N–S, are examined. The E–W sections show similar characteristics, higher b value and higher Dc in the western zone and lower in the eastern zone with depth. The N–S sections across the fault zones, however, show unique features; it imaged both the b and Dc characteristics convincingly to identify two known faults, the Kutch Mainland fault and the South Wagad fault (SWF), one stepping over the other with a seismogenic source zone at depth (20–35?km). The source zone at depth is imaged with a relatively lower b and higher Dc at the ‘fault end’ of the SWF showing a negative correlation. These observations, corroborated with the seismic tomography as well as with the proposed geological/tectonic model, shed a new light to our understanding on seismogenesis of the largest SCR earthquake in India in the recent years.     

Volcano-tectonic controls and emplacement kinematics of the Iriga debris avalanches (Philippines)

Mt Iriga in southeastern Luzon is known for its spectacular collapse scar that was possibly created in 1628 ad by a 1.5-km³ debris avalanche. The debris avalanche deposit (DAD) covered 70?km² and dammed the Barit River to form Lake Buhi. The collapse has been ascribed to a non-volcanic trigger related to a major strike-slip fault under the volcano. Using a combination of fieldwork and remote sensing, we have identified a similar size, older DAD to the southwest of the edifice that originated from a sector oblique to the underlying strike-slip fault. Both deposits cover wide areas of low, waterlogged plains, to a distance of about 16?km for the oldest and 12?km for the youngest. Hundreds of metre-wide and up to 50-m-high hummocks of intact conglomerate, sand and clay units derived from the base of the volcano show that the initial failure planes cut deep into the substrata. In addition, large proportions of both DAD consist of ring-plain sediments that were incorporated by soft-sediment bulking and extensive bulldozing. An ignimbrite unit incorporated into the younger DAD forms small (less than 5?m high) discrete hummocks between the larger ones. Both debris avalanches slid over water-saturated soft sediment or ignimbrite and spread out on a basal shear zone, accommodated by horst and graben formation and strike-slip faults in the main mass. The faults are listric and flatten into a well-developed basal shear zone. This shear zone contains components from the substrate and has a diffuse contact with the intact substrata. Long, transport-normal ridges in the distal parts are evidence of compression related to deceleration and bulldozing. The collapse orientation and structure on both sectors and DAD constituents are consistent with collapse being a response to combined transtensional faulting and gravity spreading. Iriga can serve as a model for other volcanoes, such as Mayon, that stand in sedimentary basins undergoing transtensional strike-slip faulting.