Multiple windbreaks: An aeolean ensemble

Near-neutral measurements of the turbulent wind field within and above a sequence of 15 parallel windbreaks on a flat pastoral site are presented. The windbreak fences each had a porosity of 60% and were equally-spaced at 6 times their height (h = 2 m). The following conclusions seem justified for wind directions within 10 ° of the normal to the array:

1. Above the windbreaks (2h), mean windspeeds first decreased and then increased asymptotically to a value in equilibrium with the new surface roughness. At 0.5h, windspeeds exhibited a slow increase down the entire array.
2. Reflecting differences in approach flows, the drag on the initial fence was almost twice that on barriers farther downstream. This reduction in momentum extraction per windbreak was associated with an elevation in the zero-plane displacement to a level equal to 0.8h.
3. At positions well-removed from the initial fences, mean windspeeds were reduced throughout the entire region below shelter height. In this region, the flow became increasingly dominated by downward moving air with velocities much greater than the local average. The zone of reduced turbulence was small, extending only 2h downstream of a barrier at a height of 0.25h. This corresponded with the region excluded from smoke trails released at the top of windbreaks.
4. An approximate TKE budget mid-way between windbreaks 7 and 8 suggests that shear and wake production peak near z = h and that production is balanced by dissipation and vertical transport components. Advective and inertial interaction terms are negligible at this midway position but are likely to be major sources of TKE closer to the windbreak. Local equilibrium is attained above z = 1.5h implying the existence of a constant-stress layer.

The measurements show the practical difficulty of simultaneously reducing both mean windspeeds and turbulence levels with repeated windbreaks at conventional spacings for horticultural applications.     

The nature and significance of the feedback of changes in terrestrial vegetation on global atmospheric and climatic change

The potential feedback on global atmospheric and climate change of climate-driven changes in terrestrial vegetation is examined by systematically relating the surface exchanges of energy, mass and momentum to two dimensions of vegetation, structure and taxonomy, such that the significance of climate driven changes in these characteristics can be assessed. A detailed quantitative understanding of this feedback is an important prerequisite to realistic and dynamic representations of the Earth's surface within general circulation and biological models (GCMs and GBMs). Without realistic representations of terrestrial vegetation within these models, any forecasts of future climates by these models must be suspect.Several general conclusions are drawn. The first is that the indirect feedbacks, those associated with the clouds and aerosols of the planetary boundary layer, appear to be very powerful but as yet their behaviour and connections with the underlying surface are both poorly understood and captured within GCMs.The physical structure of vegetation, the disposition of biomass in 3-D, is the characteristic that most strongly influences the exchange of momentum (via aerodynamic roughness) and solar radiation (via albedo). Vegetation structure and species composition determine the most important of the mass exchanges, evapotranspiration. Of all of the surface exchanges, the parameterization of evapotranspiration (E ) and the simulation of the water balance over time is the most critical.Lastly, the problems of scaling and spatial heterogeneity, the sub-grid variability of the modellers, looms as a difficult, but not insoluble, problem. It remains a critical problem however, and the detailed parameterization of the various big leaf models stands in absurd contrast to the simplistic generalization of the spatial heterogeneity of terrestrial landscapes.Plant ecologists can contribute to the task of improving the representation of vegetated landscapes within GCMs. There is need to simply and unify the way in which vegetation can be grouped at landscape scales. A classification that is based on function rather than phylogeny is required. The definition of Vegetation Functional Types (VFTs) would expedite research on both the impact of, and feedback on, climate change.     

Distribution and fluxes of metals in the St. Lawrence River from the outflow of Lake Ontario to Québec City

Six anchor stations in the St. Lawrence River from the outflow of Lake Ontario to Quebec City, were occupied for ca. 24 hours in June 1987 during low flow conditions. Samples of water and suspended particulate matter were separated by continuous-flow centrifugation, and were collected every two hours.During this sampling period, fluxes of dissolved forms of zinc, copper and nickel increased in Lac St. François and downstream relative to the sum of the fluxes for the two upstream stations at the outflow of Lake Ontario. Increases in the flux of dissolved zinc and copper were pronounced below Montreal and above Lac St. Pierre. For particulate forms of metals, all five metals show that there are significant inputs in the section of the St. Lawrence River between Lac St. François and the station just above the entrance to Lac St. Pierre.The average concentrations of dissolved cadmium, lead, zinc, copper and nickel ranged from 7–23 ng/l; 9–35 ng/l; 0.434–0.939 g/l; 0.15–0.89 g/l and 0.58–1.12 g/l respectively.Regression analysis of the dissolved and particulate metal concentrations suggests that the concentration of dissolved cadmium, lead, zinc and nickel can be predicted from the regression equation and the determination of particulate metal concentration. This prediction appears to be independent of the suspended particulate matter concentration which varies from ca. 1 to 10 mg/l from the outflow of Lake Ontario to Québec City.     

High pressure experimental calibration of the olivine-orthopyroxene-spinel oxygen geobarometer: implications for the oxidation state of the upper mantle

Synthetic spinel harzburgite and lherzolite assemblages were equilibrated between 1040 and 1300° C and 0.3 to 2.7 GPa, under controlled oxygen fugacity (f _{O 2}). f _{O 2} was buffered with conventional and open double-capsule techniques, using the Fe−FeO, WC-WO₂-C, Ni−NiO, and Fe₃O₄−Fe₂O₃ buffers, and graphite, olivine, and PdAg alloys as sample containers. Experiments were carried out in a piston-cylinder apparatus under fluid-excess conditions. Within the P-T-X range of the experiments, the redox ratio Fe³⁺/ΣFe in spinel is a linear function of f _{O 2} (0.02 at IW, 0.1 at WCO, 0.25 at NNO, and 0.75 at MH). It is independent of temperature at given Δlog(f _{O 2}), but decreases slightly with increasing Cr content in spinel. The Fe³⁺/ΣFe ratio falls with increasing pressure at given Δlog(f _{O 2}), consistent with a pressure correction based on partial molar volume data. At a specific temperature, degree of melting and bulk composition, the Cr/(Cr+Al) ratio of a spinel rises with increasing f _{O 2}. A linear least-squares fit to the experimental data gives the semi-empirical oxygen barometer in terms of divergence from the fayalite-magnetite-quartz (FMQ) buffer:

Lead isotope and Pb-Pb model age determinations of ores from Central Europe and their metallogenetic interpretation

The paper presents lead isotope data from 211 samples from Phanerozoic lead-bearing ore occurrences in Central Europe, particularly from the Southern part of the former German Democratic Republic. The data are interpreted in terms of Amov's dynamic model of continuous lead isotope evolution. The relationships between thoro-genic and urano-genic model ages and the source of lead in different regional units are discussed. We observed differences in lead isotope evolution in the Hercynian internides and externides. Within the Moldanubian and Saxothuringian zones we distinguish five main lead-bearing ore associations: (1) Cambrian, stratiform base metal (Hermsdorf-Waldsassen; ²⁰⁶Pb/ ²⁰⁴Pb=17.50–17.70), (2) Devonian, vein type Sb-bearing, metamorphogene (neumühle-Hartmannsdorf; 17.80–18.00), (3) Upper Carboniferous-Permian, polymetallic, including tin, vein type (Kutna hora-Freiberg-Altenberg; 18.00–18.20), (4) Triassic (-Jurassic), Pb–Ba, vein type (Stibro-Halsbrücke; 18.20–18.60), (5) Cenozoic, polymetallic, vein type, riftogene (Roztoky-Banska tiavnica; 18.80–19.10). Pb isotope characteristics from ores of the Montagne Noire and the Brioude-Massiac district correspond to this subdivision. Ore associations from the Rheno-Hercynian zone display higher ²⁰⁷Pb/²⁰⁴Pb ratios which can be explained by more evolved and less metamorphosed source rocks. Mineralizations of the eastern Harz (Straßberg-Neudorf) belong to the Permian association, those from the western Harz (Clausthal-Bad Grund) to the Triassic-Jurassic. Because of Pb isotope agreement the stratabound Rammelsberg and the vein bound Ramsbeck-I mineralization are presumed to be isogenetic. Pb isotope identity of distinct mineralizations in the basement zone (Halsbrücke-Bad Grund) and in the Triassic sediments (Gorny Slask-Mechernich-Bleiglanzbänke) suggests a strong genetic coherence. Pb isotope conformity between the Upper Carboniferous-Permian-Triassic ore associations and Hercynian postkinematic granitoids, and lamprophyric rocks, also favours a close relationship. Pb isotope and other data indicate crustal sources. As the age of the ore associations decreases, crustal influences generally increase, apart from the Roztoky mineralization.     

Geochemical specialization of the tin-bearing granitoid massifs of NW Bohemia

The geochemistry of Hercynian tin-bearing granitoid massifs of the Krune hory Mts. (Erzgebirge), Slavkovský les Forest (Kaiserwald) and Smriny (eastern Fichtelgebirge) is compared by statistical processing of 270 analyses including a wide spectrum of major and trace elements. Seven different types of granites are distinguished. Out of these, five types represent the successive differentiation of the largest massif of NW Bohemia: the Karlovy Vary (Karlsbad) massif. This comprises strongly differentiated peraluminous granites evolving towards extreme Li-Rb-Cs-F-and Sn-enrichment in the youngest members, which are albite-topaz-zinwaldite lithium granites. The sixth and seventh types are different from the former by their location in the eastern Krune hory and tectonic setting, and they display geochemical features of anorogenic granites: they are metaluminous albite-zinwaldite granites with marked enrichment of Nb, Y, and HREE in addition to Li, Rb, Cs, F and Sn, indicating contamination by sub-crustal material. Sn-W mineralizations, including flat peri-contact greisen bodies, steep greisen veins and tourmalinized phyllites, are all intimately associated with the most strongly differentiated granites — the Li-granite and the Cinovec-granite respectively.     

Commission health and development

IGU-Reports

Commission health and development     

Periodic Hartree-Fock study of minerals: Tetracoordinated silica polymorphs

Periodic Hartree-Fock STO-3G calculations have been performed on several tetracoordinated silica polymorphs: low and high quartz, low and idealized high cristobalite and prototype tridymite. The optimized structural parameters are in overall good agreement with experimental data. In the particular case of -quartz, the SiO₄ tetrahedra are found to be irregular. The optimized values of the two different SiO bond lengths are respectively 1.608 Å and 1.613 Å. The potential energy versus tilt angle curves suggest a picture of the high temperature phases in terms of delocalized oxygen atoms which is consistent with a disordered structure. Finally, the bonding in silica polymorphs is discussed from electron density maps and Mulliken population analysis.     

A layered basic intrusion,deformed and metamorphosed in granulite faciès of the Sri Lanka basement

A layered basic intrusion has been found in the Central Granulite Belt of the Sri Lanka continental basement. It intruded parallel to bedding, before all or early during deformation of neighbouring metasediments. Deformation, affecting metasediments and the intrusion alike, includes flattening to c. 1/20 of the original thickness and NNW-stretching to c. 20 times the original length. The intrusion is now 170–300 m thick. Most of the deformation was acquired under granulite facies metamorphism. The intrusion was then folded, still at high T, by a large F₄-synform with an axis parallel to str₁ and a steep axial plane. A steep axial plane cleavage and minor folds are related to this big fold. Stretching continued along its axis. Late during formation of this fold a granite intruded, mainly following S₄ cleavage planes. The intrusion shows a homogeneous gabbroic series at the bottom, followed upwards by a differentiated and layered series. A thin sequence of ultramafic rocks occurs near the middle. This indicates multiple melt-injection. More homogeneous partly biotite-bearing amphibolites form the top of the succession. Magmatic layering is well preserved, but no magmatic minerals or grain fabrics have escaped deformation or metamorphism. Static annealing under granulite facies conditions outlasted all deformation and was accompanied and followed by the beginning of cooling. Hornblende-Plagioclase coronas formed round garnets at this stage. Geochemical work, carried out by STOSCH (1991) on our samples, confirms the cumulate nature of the rocks.

---

Zusammenfassung Eine geschichtete Basische Intrusion wurde im Central Granulite Belt der tiefen, kontinentalen Kruste Sri Lankas entdeckt. Sie intrudierte parallel zur Schichtung in benachbarte Sedimente, vor aller oder sehr früh in deren Deformation. Die Deformation, die Sedimente und die Intrusion in gleicher Weise betraf, führte zu Plättung auf das ca. 1/20 der Ausgangsdicke und zu NNW-Streckung auf das ca. 20fache der Ausgangslänge. Heute ist die Intrusion 170–300 m dick. Der Hauptteil der Deformation wurde unter Granulit-Fazies-Bedingungen erworben. Noch bei hoher T wurde die Intrusion durch eine große F₄-Falte gefaltet. Deren Achse liegt parallel der Streckungsrichtung, stri, ihre Achsenebene ist steil. Eine steile, Achsenebenen-parallele S₄-Schieferung und kleinere Falten entstanden mit ihr. Während der Bildung dieser Falte hielt die Streckung parallel ihrer Achse an. Spät während ihrer Bildung intrudierte ein Granit. Er folgt im wesentlichen S₄. Die Intrusion beginnt unten mit einer homogenen, gabbroiden Serie. Nach oben folgt eine differenzierte, geschichtete. Ein dünnes Paket ultramafischer Lagen erscheint nahe der Mitte. Es weist auf multiple Schmelz-Zufuhr hin. Homogenere Amphibolite, teils mit Biotit, bilden den obersten Teil. Magmatischer Lagenbau ist gut erhalten, lokal mit Gradierung. Magmatische Minerale oder Korngefüge haben Deformation und Metamorphose nicht überlebt. Statische Temperung unter Granulit-Fazies-Bedingungen überdauerte alle Deformation. Sie beginnt und dauert an bei bereits sinkender T. Hornblende-Plagioklas-Koronas bilden sich in diesem statischen Endstadium. STOSCH (1991) untersuchte unsere Proben von der Intrusion geochemisch. Er bestätigte die Kumulatnatur der Gesteine.

---

Résumé Une intrusion basique litée a été découverte dans la ceinture centrale granulitique du socle continental du Sri Lanka. L'intrusion s'est effectuée parallèlement à la stratification, avant la déformation des métasédiments encaissants ou tout au début de celleci. La déformation, qui affecte à la fois les métasédiments et l'intrusion, comporte un aplatissement jusqu'à ± 1/20 de l'épaisseur d'origine, et un allongement de ± 20 fois en direction NNW. L'intrusion présente actuellement une épaisseur de 170 à 300 m. La plus grande part de la déformation a été acquise dans les conditions du faciès des granulites. L'intrusion a ensuite été plissée, toujours à haute T, en un large synforme F₄ dont l'axe est parallèle à l'allongement stri et dont le plan axial est vertical. Ce grand pli est accompagné d'une schistosité S₄ plan-axiale redressée et de plis secondaires. L'allongement s'est poursuivi parallèlement à son axe. A la fin de la formation de ce pli, un granite s'est intrudé, qui suit en gros S₄. L'intrusion comporte à sa base une série gabbroïque homogène, suivie vers le haut par une série litée et différenciée. Elle contient, vers son milieu, une intercalation mince de roches ultramafiques. Ceci implique des injections répétées de magma. Le sommet est formé d'amphibolites homogènes partiellement biotitiques. Le litage magmatique est bien conservé, mais aucun minéral ou fabrique magmatique n'a échappé à la déformation et au métamorphisme. Un recuit statique dans les conditions granulitiques a suivi la déformation; il a été accompagné et suivi par le début du refroidissement. A ce stade, des couronnes à hornblende-plagioclase se sont formées autour des grenats. Une étude géochimique, effectuée en 1991 par Stosch sur nos échantillons confirme le caractère de cumulat des roches.

---

- . , . , , 1/20 20- NNW . 170–300 . . F₄, str₁, . , S₄, . . . S₄. , , . . , , . coxpa . , .. . , . . . . STOSCH (1991) .

---

List of abbreviations ss sedimentary bedding - s₁ first cleavage, plane of first flattening - str₁ Direction of first stretching; although L is usually used for lineations of different kind, including stretching, we use this term to point out that extension is proved in each case - F₂ second folds = first folds folding s₁ - s₂ second cleavage or plane of flattening - F₃ third folds - s₃ third cleavage or plane of flattening - F₄ fourth folds, folding s_1,2,3 and F_1,2,3 - s₄ fourth cleavage or plane of flattening - str₄ direction of fourth stretching - F_5,6 fifth and sixth folds - gf(m) granulite facies (metamorphism) - af(m) amphibolite facies (metamorphism) - KNa-f KNa-feldspar - pg plagioclase - f feldspar - opx orthopyroxene - cpx clinopyroxene - px pyroxene - hb hornblende - bi biotite - cc calcite - do dolomite - qz quartz - mt magnetite