Noble gases and meteorites

Abstract— Noble gases repeatedly have served to widen the scope of meteorite research. During the first half century of such measurements, the emphasis was on the determination of U, Th/He-gas retention ages of iron meteorites, which is the most unsuitable class of meteorites for such studies. With the realization that the He in these meteorites results from the interaction of cosmic rays with meteoritic matter, meteorites became to be used as “the poor man's space probe” that yielded information on the constancy in time and space of the cosmic radiation. Another widening of scope came with the discovery of extremely high noble gas contents in the outermost layers of the individual grains that make up stony meteorites. These gases are of solar origin; they have been implanted as low-energy solar wind (SW) or as solar energetic particles (SEP) into the grains before their compaction. Presently they offer the only opportunity to precisely measure the isotopic composition of solar matter and to learn about potential changes of the Sun in time. Stony meteorites of the “carbonaceous” variety contain “stardust” that carries the undiluted nucleosynthesis products of individual stars that yield incredibly detailed information concerning the parameters that prevailed during the synthesis.     

X-ray absorption in Seyfert 2 galaxies

We have studied the correlation among X-ray absorption, optical reddening and nuclear dust morphology in Seyfert 2 galaxies. Two main conclusions emerge: (i) the Balmer decrement and the amount of X-ray absorption are anticorrelated over a wide range of column density,     – the correlation no longer applies to Compton-thick objects     , although they span a comparable range in Balmer decrement; (ii) Compton-thin Seyfert 2s seem to prefer nuclear environments, which are rich in dust on scales of hundreds of parsecs. On the other hand, Compton-thick Seyferts indifferently exhibit 'dust-poor' and 'dust-rich' environments. These results support an extension of the Seyfert unification scenario (as recently proposed by Matt ), where Compton-thick Seyfert 2s are observed through compact 'torii', whereas Compton-thin ones are obscured by dust on much larger scales.     

Zonal Differences in Jupiter's Atmosphere from Continuum CCD Photometry of Its Disk

Based on our 1997 observations with a CCD camera and narrow-band filters attached to the 1-m Assy Obsev vatory telescope, we extensively study the latitudinal variations in limb darkening and normal albedo on Jupiter's disk at wavelengths of 387, 445, 502, 619, and 702 nm. In addition, we carried out observations in 1998 with broad-band red, green, and blue filters. Apart from a general regularity—the increase in darkening coefficient with normal albedo of Jupiter's cloud cover—there is an appreciable scatter of darkening coefficients for the same albedo, which is most pronounced in the ultraviolet. This scatter may result from differences in the optical depth of the aerosol haze above the clouds. The lack of any wavelength dependence of the darkening coefficients is confirmed for Jupiter's polar regions, while at other latitudes, they decrease with decreasing wavelength.     

Oxygen isotopic compositions and origins of calcium‐aluminum‐rich inclusions and chondrules

Abstract— Primary minerals in calcium‐aluminum‐rich inclusions (CAIs), Al‐rich and ferromagnesian chondrules in each chondrite group have δ¹⁸O values that typically range from ?50 to +5%0. Neglecting effects due to minor mass fractionations, the oxygen isotopic data for each chondrite group and for micrometeorites define lines on the three‐isotope plot with slopes of 1.01 ± 0.06 and intercepts of ?2 ± 1. This suggests that the same kind of nebular process produced the ¹⁶O variations among chondrules and CAIs in all groups. Chemical and isotopic properties of some CAIs and chondrules strongly suggest that they formed from solar nebula condensates. This is incompatible with the existing two‐component model for oxygen isotopes in which chondrules and CAIs were derived from heated and melted ¹⁶O‐rich presolar dust that exchanged oxygen with ¹⁶O‐poor nebular gas. Some FUN CAIs (inclusions with isotope anomalies due to fractionation and unknown nuclear effects) have chemical and isotopic compositions indicating they are evaporative residues of presolar material, which is incompatible with ¹⁶O fractionation during mass‐independent gas phase reactions in the solar nebula. There is only one plausible reason why solar nebula condensates and evaporative residues of presolar materials are both enriched in ¹⁶O. Condensation must have occurred in a nebular region where the oxygen was largely derived from evaporated ¹⁶O‐rich dust. A simple model suggests that dust was enriched (or gas was depleted) relative to cosmic proportions by factors of ～10 to >50 prior to condensation for most CAIs and factors of 1–5 for chondrule precursor material. We infer that dust‐gas fractionation prior to evaporation and condensation was more important in establishing the oxygen isotopic composition of CAIs and chondrules than any subsequent exchange with nebular gases. Dust‐gas fractionation may have occurred near the inner edge of the disk where nebular gases accreted into the protosun and Shu and colleagues suggest that CAIs formed.     

Stellar CCD Photometry: New Approach Principles and Application

A new approach is proposed and developed to handle pre-processed CCD frames in order to identify stellar images and derive their relevant parameters. The present method relies on: 1) identifying stellar images and assigning approximate positions of their centres using artificial intelligence techniques, 2) accurate determination of the centre coordinates applying an elementary statistical concept and 3) estimating the image peak intensity as a stellar magnitude measure employing a simple numerical analysis approach. The method has been coded for personal computer users. A CCD frame of the star cluster M67 was adopted as a test case. The results obtained are discussed in comparison with the DAOPHOTII ones and the corresponding published data. Exact coincidence has been found between both results except very few cases. These exceptions have been discussed in view of both methods' bases and the cluster plates. It has been realized that the method suggested exhibits very simple, extremely fast and high precise approach in stellar CCD photometry domain. Moreover, it is more capable for handling blended and distorted stellar images than the DAOPHOTII. These characteristics show the usefulness of the present method in some astronomical applications such as auto-focusing and auto-guiding sensing approaches beside the main purpose, viz. stellar photometry. This revised version was published online in July 2006 with corrections to the Cover Date.     

Variable stars,photoelectric photometry,science education,and the A.A.V.S.O.

The role of amateurs and small-scale equipment in astronomical photometry is reviewed. The value of suitably selected projects for both research and educational purposes is stressed. Recent technical developments are noted, and a brief extrapolation to possible future arrangements included.Keynote address at the conference     

A simulation tool for high data-rate acoustic communication in ashallow-water, time-varying channel

The paper discusses the development of a simulation tool to model high data-rate acoustic communication in shallow water. The simulation tool is able to generate synthetic time series of signals received at a transducer array after transmission across a shallow-water communication channel. The simulation tool is suitable for testing advanced signal processing techniques for message recovery. A channel model has been developed based on the physical aspects of the acoustic channel. Special emphasis has been given to fluctuations of the signal transmission caused by time-varying multipath effects. At shorter ranges, the temporal variations are dominated by acoustic scattering from the moving sea surface. Therefore, the channel model produces a coherence function which may be interpreted as a time-varying reflection coefficient for the surface scattered acoustical path. A static, range-independent ray model identifies the significant multipaths, and the surface path is modulated with the time-varying reflection coefficient. The advantages and limitations of the channel model are discussed and assumptions necessary to overcome the limitations are emphasised. Based on the assumptions, an algorithm has been developed and implemented to model how a binary message will be modulated when transmitted by a transducer, is distorted in the channel and finally is received by a transducer array     

OSCR wave measurements-some preliminary results

OSCR is an HF radar system that has been developed for high spatial resolution coastal surface current measurement. This paper describes preliminary results that demonstrate that wave measurement can be successfully obtained from suitably processed OSCR data. Comparisons with data from a WAVEC directional buoy are presented and show encouraging agreement. Some of the limitations to the measurement process are discussed and indicate a maximum range of about 20 km. Surface current variability on short time scales presents the most serious obstacle to wave measurement. This appears to be more of a problem when the mean currents are large, in that in these circumstances the data fail initial quality control criteria. However, in lower mean currents, the effect is often still present and leads to errors in long wave measurement     

Application of an improved self-starter to geoacoustic inversion

The self-starter is improved using the operator of the split-step Pade solution. In addition to providing greater stability and being applicable closer to the source, the improved self-starter is an efficient forward model for geoacoustic inversion. It is necessary to solve only O(10) tridiagonal systems of equations to obtain the acoustic field on a vertical array located O(10) wavelengths from a source. This experimental configuration is effective for geoacoustic inverse problems involving unknown parameters deep in the ocean bottom. For problems involving depth-dependent acoustic parameters, the improved self-starter can be used to solve nonlinear inverse problems involving O(10) unknown sediment parameters in less than a minute on the current generation of workstations     

The variability of Mercury's exosphere by particle and radiation induced surface release processes

Mercury's close orbit around the Sun, its weak intrinsic magnetic field and the absence of an atmosphere (P_surface<1×10⁻⁸ Pa) results in a strong direct exposure of the surface to energetic ions, electrons and UV radiation. Thermal processes and particle-surface-collisions dominate the surface interaction processes leading to surface chemistry and physics, including the formation of an exosphere (N?10¹⁴ cm⁻²) in which gravity is the dominant force affecting the trajectories of exospheric atoms. NASA's Mariner 10 spacecraft observed the existence of H, He, and O in Mercury's exosphere. In addition, the volatile components Na, K, and Ca have been observed by ground based instrumentation in the exosphere. We study the efficiency of several particle surface release processes by calculating stopping cross-sections, sputter yields and exospheric source rates. Our study indicates surface sputter yields for Na between values of about 0.27 and 0.35 in an energy range from 500 eV up to 2 keV if Na⁺ ions are the sputter agents, and about 0.037 and 0.082 at an energy range between 500 eV up to 2 keV when H⁺ are the sputter agents and a surface binding energy of about 2 eV to 2.65 eV. The sputter yields for Ca are about 0.032 to 0.06 and for K atoms between 0.054 to 0.1 in the same energy range. We found a sputter yield for O atoms between 0.025 and 0.04 for a particle energy range between 500 eV up to 2 keV protons. By taking the average solar wind proton surface flux at the open magnetic field line area of about 4×10⁸ cm⁻² s⁻¹ calculated by Massetti et al. (2003, Icarus, in press) the resulting average sputtering flux for O is about 0.8-1.0×10⁷ cm⁻² s⁻¹ and for Na approximately 1.3-1.6×10⁵ cm⁻² s⁻¹ depending on the assumed Na binding energies, regolith content, sputtering agents and solar activity. By using lunar regolith values for K we obtain a sputtering flux of about 1.0-1.4×10⁴ cm⁻² s⁻¹. By taking an average open magnetic field line area of about 2.8×10¹⁶ cm² modelled by Massetti et al. (2003, Icarus, in press) we derive an average surface sputter rate for Na of about 4.2×10²¹ s⁻¹ and for O of about 2.5×10²³ s⁻¹. The particle sputter rate for K atoms is about 3.0×10²⁰ s⁻¹ assuming lunar regolith composition for K. The sputter rates depend on the particle content in the regolith and the open magnetic field line area on Mercury's surface. Further, the surface layer could be depleted in alkali. A UV model has been developed to yield the surface UV irradiance at any time and latitude over a Mercury year. Seasonal and diurnal variations are calculated, and Photon Stimulated Desorption (PSD) fluxes along Mercury's orbit are evaluated. A solar UV hotspot is created towards perihelion, with significant average PSD particle release rates and Na fluxes of about 3.0×10⁶ cm⁻² s⁻¹. The average source rates for Na particles released by PSD are about 1×10²⁴ s⁻¹. By using the laboratory obtained data of Madey et al. (1998, J. Geophys. Res. 103, 5873-5887) for the calculation of the PSD flux of K atoms we get fluxes in the order of about 10⁴ cm⁻² s⁻¹ along Mercury's orbit. However, these values may be to high since they are based on idealized smooth surface conditions in the laboratory and do not include the roughness and porosity of Mercury's regolith. Further, the lack of an ionosphere and Mercury's small, temporally and spatially highly variable magnetosphere can result in a large and rapid increase of exospheric particles, especially Na in Mercury's exosphere. Our study suggests that the average total source rates for the exosphere from solar particle and radiation induced surface processes during quiet solar conditions may be of the same order as particles produced by micrometeoroid vaporization. We also discuss the capability of in situ measurements of Mercury's highly variable particle environment by the proposed NPA-SERENA instrument package on board ESA's BepiColombo Mercury Planetary Orbiter (MPO).