Contribution of storms to groundwater recharge in the semi‐arid region of Karnataka,India

This paper describes the application of environmental isotopes and injected tracer techniques in estimating the contribution of storms as well as annual precipitation to groundwater recharge and its circulation, in the semi‐arid region of Bagepalli, Kolar district, Karnataka. Environmental isotopes ²H, ¹⁸O and ³H were used to study the effect of storms on the hydrological system, and an isotope balance was used to compute the contribution of a storm component to the groundwater. Some of the groundwater samples collected during the post‐storm periods were highly depleted in stable isotope content with higher deuterium excess relative to groundwater from the pre‐storm periods. Significant variation in deuterium excess in groundwater from the same area, collected in two different periods, indicates the different origin of air masses. The estimated recharge component of a storm event of 600 mm to the groundwater was found to be in the range of 117–165 mm. There was no significant variation in environmental tritium content of post‐storm and pre‐storm groundwater, indicating the fast circulation of groundwater in the system. After completion of the environmental isotope work, an injected radiotracer ³H technique was applied to estimate the direct recharge of total precipitation to the groundwater. The estimated recharge to the groundwater is 33 mm of the 550 mm annual precipitation during 1992. Copyright © 2003 John Wiley & Sons, Ltd.     

APPLICATION OF GEOGRAPHICAL PARAMETER DATABASE TO ESTABLISHMENT OF UNIT POPULATION DATABASE

Now GIS is turning into a good tool in handling geographical, economical, and population data, so we can obtain more and more information from these data. On the other hand, in some cases, for a calamity, such as hurricane, earthquake, flood, drought etc., or a decision-making, such as setting up a broadcasting transmitter, building a chemical plant etc., we have to evaluate the total population in the region influenced by a calamity or a project. In this paper, a method is put forward to evaluate the population in such special region. Through exploring the correlation of geographical parameters and the distribution of people in the same region by means of quantitative analysis and qualitative analysis, unit population database (1km× 1km) is established. In this way, estimating the number of people in a special region is capable by adding up the population in every grid involved in this region boundary. The geographical parameters are obtained from topographic database and DEM database on the scale of     

Mid-term quasi-periodicities in geomagnetic activity during the last 15 solar cycles: Connection to solar dynamo strength – To the memory of Karolen I. Paularena (1957-2001)

Several recent studies have reported quasi-periodicities with a period between 1 and 2 years (to be called here `mid-term quasi-periodicities') in various heliospheric parameters, like solar wind speed, interplanetary magnetic field, cosmic rays, and geomagnetic activity. Here we study their long-term occurrence in geomagnetic activity using an extended aa index which covers the last 15 solar cycles. We confirm their intermittent occurrence and the alternation of their dominant period between a slightly shorter period of about 1.2–1.4 years and a slightly longer period of about 1.5–1.7 years. We find that the mid-term quasi-periodicities were strong during two intervals of high solar activity: in the mid-19th century and since 1930. Instead, contrary to earlier studies, we find that they were consistently weak during low solar activity from 1860s to 1920s. This implies a long-term connection between the amplitude of mid-term quasi-periodicities and the solar dynamo strength. Since the rotation speed at the bottom of the solar convection layer (tachocline) has recently been found to vary at a mid-term periodicity, this suggests that the stronger the solar dynamo is, the more variable the rotation rate of the tachocline is. We also note that the disappearance of mid-term periodicities may be used as a precursor for long intervals of very weak solar activity, like great minima.     

On the Spectral Index－Flux Density Relation for Large Samples of Radio Sources

We present new statistical results on the spectral index-flux density relation for large samples of radio sources using archival data of the most sensitive surveys, such as 6C, Miyun, WENSS, B3, NVSS, GB87. Instrumental selection effects and the completeness of the catalogs are discussed. Based on the spectral indices calculated for about 200 000 sources from the WENSS (327 MHz) and NVSS (1.4 GHz) catalogs, we obtained (1) The median spectral index increases from amed --0.9 toαmed --0.8 (Svαvα), while S327 flux densities decrease from 0.1 Jy down to 25mJy. The median spectral indices nearly show no variation within the error bars when the flux density is larger than 0.1 Jy. (2) A dependence of the fraction of ultra-steep spectrum sources (USS, -1.5 <α<-1.0), steep spectrum sources (SSS, -1.0 <α< -0.5) and flat spectrum sources (FSS, -0.5≤α≤0.0) is partly responsible for the spectral flattening. Another contribution to the spectral flattening comes from the variation of αmed of steep spectrum so     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

F stars, metallicity and the ages of red galaxies at z > 1

We explore whether the rest-frame near-ultraviolet spectral region, observable in high-redshift galaxies via optical spectroscopy, contains sufficient information to allow the degeneracy between age and metallicity to be lifted. We do this by first testing the ability of evolutionary synthesis models to reclaim the correct metallicity when fitted to the near-ultraviolet spectra of F stars of known (subsolar and supersolar) metallicity. F stars are of particular interest because the rest-frame near-ultraviolet spectra of the oldest known elliptical galaxies at   z > 1  appear to be dominated by F stars near to the main-sequence turn-off.
We find that, in the case of the F stars, where the Hubble Space Telescope ultraviolet spectra have a high signal-to-noise ratio, fitting models in which the metallicity is allowed to vary as a free parameter is rather successful at deriving the correct metallicity. As a result, the estimated turn-off ages of these stars yielded by model-fitting are well constrained. Encouraged by this we have fitted these same variable-metallicity models to the deep, optical spectra of the   z ≃ 1.5 mJy  radio galaxies 53W091 and 53W069 obtained with the Keck telescope. While the age and metallicity are not so easily constrained for these galaxies, we find that even when metallicity is allowed as a free parameter, the best estimates of their ages are still ≥3 Gyr, with ages younger than 2 Gyr now strongly excluded. Furthermore, we find that a search of the entire parameter space of metallicity and star formation history using MOPED leads to the same conclusion. Our results therefore continue to argue strongly against an Einstein–de Sitter universe, and favour a Λ-dominated universe in which star formation in at least these particular elliptical galaxies was completed somewhere in the redshift range   z = 3–5  .     

EMERGY ANALYSIS OF GRAIN PRODUCTION SYSTEM IN JIANGSU AND SHAANXI PROVINCES

Efficiency and sustainability of grain production are now important in China. In this study, the grain production systems of Jiangsu and Shaanxi Provinces were compared, to analyze their efficiency and sustainability in terms of utilization of natural resources, inputs of purchased energy and materials, and outputs. Flows of energy and materials between environment and human society were identified, and the natural and human work involved in generating inputs as materials or energy were valued in terms of equivalent amount of solar energy required for their production using emergy method. The results showed environmental resources were continually playing a less important role in the systems, when inorganic subsidiary emergy inputs increased drastically while organic ones decreased or increased little. Deterioration of input emergy structure affected the systems‘ efficiency and sustainability, resulting in emergy investment ratios and environmental loading ratios increasing while yield ratios and sustainability indices decreasing. In general, efficiency and sustainability of grain production in Jiangsu are worse than those in Shaanxi. This analysis also suggested that inorganic subsidiary emergy should be introduced properly, and peasants in Jiangsu should utilize natural conditions wisely while those in Shaanxi pay enough attention to soil and surface water conservation.     

An Instantaneous-Frequency Filtering Technique for High-Frequency Radar Oceanography

High-frequency (HF) radar systems are remote sensing tools that can be used to measure oceanographic parameters. Problems can occur when using the conventional periodogram (PG) method for computing power spectral estimates from backscattered radar signals. Temporal and spatial inhomogeneities within the radar measurement region can cause distortion in the spectra. This paper describes an instantaneous-frequency (IF) filtering technique that has been developed to measure the first-order modulation contained within the radar signal. Successful removal of this modulation is shown to yield an increased quality and quantity of ocean measurements