Importance of water quality to nekton habitat use in a North Carolina Branch estuary

Nekton abundance and water quality were examined over 8 yr (1986–1993) in Isaac Creek, a small (2.5 km long), shallow (1–2 m), estuarine creek draining to Adams Creek (Neuse River system), North Carolina, United States. Water quality and nekton were sampled at 8 to 12 stations at 2–3 wk intervals from April to October (76 dates). The nekton assemblage, sampled by trawl, included 42 taxa but was dominated by 11 species (7 fish and 4 decapod crustaceans). Nekton and water quality (temperature, salinity, dissolved oxygen [DO], salinity gradient) data were grouped and analyzed by three (upper, middle, and lower) creek zones to determine if estimated abundance was correlated with water quality. Potentially stressful water quality conditions for salinity (<5 ppt), temperature (>30°C in morning), and DO (<2 mg 1⁻¹) mainly occurred in the upper and middle zones. The most frequent occurrence of potentially stressful conditions for salinity was in the spring and for dissolved oxygen and temperature in middle to late summer. The frequency of potentially stressful conditions increased during a 3-yr period following timber harvest of a large portion of the watershed. Canonical correspondence analysis (CCA) suggested little correlation between the top 11 species and water quality and indicated an assemblage with regular seasonal changes. Comparison of nekton use of the middle and upper zones of the creek for 3-yr pre- and post-harvest periods showed an increase in proportion of nekton caught in those zones, despite the higher frequency of potentially stressful water quality conditions. This observation suggests that a complex set of factors, including water quality, influence the pattern of nekton use in Isaac Creek.     

Zircon response to high-grade metamorphism as revealed by U–Pb and cathodoluminescence studies

Correct interpretation of zircon ages from high-grade metamorphic terrains poses a major challenge because of the differential response of the U–Pb system to metamorphism, and many aspects like pressure–temperature conditions, metamorphic mineral transformations and textural properties of the zircon crystals have to be explored. A large (c. 450?km²) coherent migmatite complex was recently discovered in the Bohemian Massif, Central European Variscides. Rocks from this complex are characterized by granulite- and amphibolite-facies mineral assemblages and, based on compositional and isotopic trends, are identified as the remnants of a magma body derived from mixing between tonalite and supracrustal rocks. Zircon crystals from the migmatites are exclusively large (200–400?μm) and yield ²⁰⁷Pb/²⁰⁶Pb evaporation ages between 342–328?Ma and single-grain zircon fractions analysed by U–Pb ID-TIMS method plot along the concordia curve between 342 and 325?Ma. High-resolution U–Pb SHRIMP analyses substantiate the existence of a resolvable age variability and yield older ²⁰⁶Pb/²³⁸U ages (342–330?Ma, weighted mean age?=?333.6?±?3.1?Ma) for inner zone domains without relict cores and younger ²⁰⁶Pb/²³⁸U ages (333–320?Ma, weighted mean age?=?326.0?±?2.8?Ma) for rim domains. Pre-metamorphic cores were identified only in one sample (²⁰⁶Pb/²³⁸U ages at 375.0?±?3.9, 420.3?±?4.4 and 426.2?±?4.4?Ma). Most zircon ages bracket the time span between granulite-facies metamorphism in the Bohemian Massif (~345?Ma) and the late-Variscan anatectic overprint (Bavarian phase, ~325?Ma). It is argued that pre-existing zircon was variously affected by these metamorphic events and that primary magmatic growth zones were replaced by secondary textures as a result of diffusion reaction processes and replacement of zircon by dissolution and recrystallization followed by new zircon rim growth. Collectively, the results show that the zircons equilibrated during high-grade metamorphism and record partial loss of radiogenic Pb during post-peak granulite events and new growth under subsequent anatectic conditions.     

Unexpected post-settlement freshening and increase in charophytes in Bombah Broadwater (Myall Lakes,New South Wales,Australia)

Bombah Broadwater is a shallow coastal lake within the Ramsar-listed Myall Lakes system on the mid-north coast of New South Wales, Australia. Increased nutrient and sediment loads resulting from catchment modification are thought to have instigated the loss of aquatic plants in the lake, causing it to “switch” from a clear, macrophyte dominated system (similar to the conditions in present day Myall Lake) to a turbid, phytoplankton dominated system. To assess this hypothesis, charophytes, foraminifera and aquatic fauna remains from an 800 year sediment record were examined. The sediment chronology was established using ¹⁴C, ²¹⁰Pb and ¹³⁷Cs radiometric dating and sediment composition. Interestingly, a clear increase in charophytes since European arrival conflicted with the hypothesised aquatic plant loss. Hence, it appears Bombah Broadwater has not undergone a change in stable state since European arrival. An additional and unexpected finding in the patterns of the foraminifera and testate amoeba suggest that Bombah Broadwater has freshened substantially since European arrival. This freshening may have resulted from increased catchment run off as a result of the clearance of catchment vegetation. Since catchment vegetation clearance is widespread in Australia, this finding raises the possibility that post-settlement freshening of coastal lakes may be a common occurrence.     

Lake ice phenology in Berlin-Brandenburg from 1947–2007: observations and model hindcasts

Rising northern hemispheric mean air temperatures reduce the amount of winter lake ice. These changes in lake ice cover must be understood in terms of resulting effects on lake ecosystems. Accurate predictions of lake ice phenology are essential to assess resulting impact. We applied the one-dimensional physical lake model FLake to analyse past variability in ice cover timing, intensity and duration of Berlin-Brandenburg lakes. The observed ice phenology in two lakes in the period 1961–2007 was reconstructed by FLake reasonably well and with higher accuracy than by state-of-the-art linear regression models. Additional modelling results of FLake for 38 Berlin-Brandenburg lakes, observed in the winter of 2008/09, were quite satisfactory and adequately reproduced the effects of varying lake morphology and trophic state. Observations and model results showed that deeper and clearer lakes had more ice-free winters, later ice cover freezing and earlier ice cover thawing dates, resulting in shorter ice-covered periods and fewer ice-covered days than shallow and less clear lakes. The 1947–2007 model hindcasts were implemented using FLake for eight Berlin-Brandenburg lakes without ice phenology observations. Results demonstrated past trends of later ice start and earlier ice end, shorter ice cover duration and an increase in ice-free winters.     

Shear wave crustal velocity model of the Western Bohemian Massif from Love wave phase velocity dispersion

We propose a new quantitative determination of shear wave velocities for distinct geological units in the Bohemian Massif, Czech Republic (Central Europe). The phase velocities of fundamental Love wave modes are measured along two long profiles (~200 km) crossing three major geological units and one rift-like structure of the studied region. We have developed a modified version of the classical multiple filtering technique for the frequency-time analysis and we apply it to two-station phase velocity estimation. Tests of both the analysis and inversion are provided. Seismograms of three Aegean Sea earthquakes are analyzed. One of the two profiles is further divided into four shorter sub-profiles. The long profiles yield smooth dispersion curves; while the curves of the sub-profiles have complicated shapes. Dispersion curve undulations are interpreted as period-dependent apparent velocity anomalies caused both by different backazimuths of surface wave propagation and by surface wave mode coupling. An appropriate backazimuth of propagation is found for each period, and the dispersion curves are corrected for this true propagation direction. Both the curves for the long and short profiles are inverted for a 1D shear wave velocity model of the crust. Subsurface shear wave velocities are found to be around 2.9 km/s for all four studied sub-profiles. Two of the profiles crossing the older Moldanubian and Teplá-Barrandian units are characterized by higher velocities of 3.8 km/s in the upper crust while for the Saxothuringian unit we find the velocity slightly lower, around 3.6 km/s at the same depths. We obtain an indication of a shear wave low velocity zone above Moho in the Moldanubian and Teplá-Barrandian units. The area of the Eger Rift (Teplá-Barrandian–Saxothuringian unit contact) is significantly different from all other three units. Low upper crust velocities suggest sedimentary and volcanic filling of the rift as well as fluid activity causing the earthquake swarms. Higher velocities in the lower crust together with weak or even missing Moho implies the upper mantle updoming.     

Assessment and Prediction of Liquefaction Potential Using Different Artificial Neural Network Models: A Case Study

Soil liquefaction as a transformation of granular material from solid to liquid state is a type of ground failure commonly associated with moderate to large earthquakes and refers to the loss of strength in saturated, cohesionless soils due to the build-up of pore water pressures and reduction of the effective stress during dynamic loading. In this paper, assessment and prediction of liquefaction potential of soils subjected to earthquake using two different artificial neural network models based on mechanical and geotechnical related parameters (model A) and earthquake related parameters (model B) have been proposed. In model A the depth, unit weight, SPT-N value, shear wave velocity, soil type and fine contents and in model B the depth, stress reduction factor, cyclic stress ratio, cyclic resistance ratio, pore pressure, total and effective vertical stress were considered as network inputs. Among the numerous tested models, the 6-4-4-2-1 structure correspond to model A and 7-5-4-6-1 for model B due to minimum network root mean square errors were selected as optimized network architecture models in this study. The performance of the network models were controlled approved and evaluated using several statistical criteria, regression analysis as well as detailed comparison with known accepted procedures. The results represented that the model A satisfied almost all the employed criteria and showed better performance than model B. The sensitivity analysis in this study showed that depth, shear wave velocity and SPT-N value for model A and cyclic resistance ratio, cyclic stress ratio and effective vertical stress for model B are the three most effective parameters on liquefaction potential analysis. Moreover, the calculated absolute error for model A represented better performance than model B. The reasonable agreement of network output in comparison with the results from previously accepted methods indicate satisfactory network performance for prediction of liquefaction potential analysis.     

Weathering of sulfidic shale and copper mine waste: secondary minerals and metal cycling in Great Smoky Mountains National Park,Tennessee, and North Carolina,USA

Metal cycling via physical and chemical weathering of discrete sources (copper mines) and regional (non-point) sources (sulfide-rich shale) is evaluated by examining the mineralogy and chemistry of weathering products in Great Smoky Mountains National Park, Tennessee, and North Carolina, USA. The elements in copper mine waste, secondary minerals, stream sediments, and waters that are most likely to have negative impacts on aquatic ecosystems are aluminum, copper, zinc, and arsenic because these elements locally exceed toxicity guidelines for surface waters or for stream sediments. Acid-mine drainage has not developed in streams draining inactive copper mines. Acid-rock drainage and chemical weathering processes that accompany debris flows or human disturbances of sulfidic rocks are comparable to processes that develop acid-mine drainage elsewhere. Despite the high rainfall in the mountain range, sheltered areas and intermittent dry spells provide local venues for development of secondary weathering products that can impact aquatic ecosystems.Electronic Supplementary Material  Supplementary material is available for this article if you access the article at . A link in the frame on the left on that page takes you directly to the supplementary material.

Probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers

Many bulk carrier losses have been reported of late, and one of the possible causes of such casualties is thought to be the structural failure of aging hulls in rough weather. Clearly, in such cases, vessels that start out being adequate somehow become marginal later in life. Fatigue and corrosion-related potential problems may be the most important factors affecting such age related vessel damage. With respect to fatigue, extensive studies have been done worldwide both experimentally and theoretically, and the results have been applied to some extent. However, in the case of corrosion effects, additional research is still needed to better understand, clarify and address the various strength uncertainties and their effects on structural behaviour. This paper develops a probabilistic corrosion rate estimation model for the longitudinal strength members of bulk carriers. The model is based on available statistical data for corrosion of existing bulk carriers. The corrosion data collected are documented for future use.     

Types,geological features and geodynamic significances of gold-copper deposits in the Kanggurtag metallogenic belt,eastern Tianshan,NW China

Occupying the middle of the central Asia Paleozoic accretionary and collisional orogenic belt, the eastern Tianshan area has a great economic potential due to Au-Cu mineralization during syn- and post- orogenic events. In the Kanggurtag Au-Cu metallogenic belt, three major types of gold deposits have been recognized: ductile-shear-zone-hosted gold deposits, magmatic hydrothermal gold deposits, and epithermal gold deposits. Four kinds of copper deposits have also been identified recently: the porphyry-type, the skarn-type, the magmatic type, and volcanic/sedimentary-type. Tectonically, the development of these late Paleozoic gold and copper deposits was closely associated with the subduction and collision of the ancient Tianshan ocean that intervened between the Tarim craton and the Siberian block. In the early to mid-Carboniferous, N-dipping subduction beneath the Dananhu arc generated magmatic intrusions, leading to formation of the porphyry Cu deposits. The magmatic front migrated southward to form the Yamansu arc upon the Kanggurtag accretionary wedge. In the latest Carboniferous to early Permian, during the closure of the ancient Tianshan ocean, large mafic-ultramafic complexes were emplaced, resulting in several magmatic copper-nickel deposits. Gold deposits of the shear-zone-type are controlled by the Kanggurtag ductile shear zone, which is related to collisional orogenesis. The epithermal gold deposits are associated with extensional tectonics and post-tectonic volcanic activity. The tectonic settings, geological features, and temporal and spatial distributions of these different types of gold and copper deposits reflect, to a great extent, the accretionary and collisional tectonics that occurred between the northern margin of the Tarim block and the southern margin of the Siberian block.     

滑坡稳定性评价中地震作用力计算的讨论

阐述了目前国内外在滑坡地震稳定性评价方面的理论研究成果和实际应用情况,指出地质矿产行业规范在采用静力法计算地震力时没有乘以0.25的综合影响系数,和其它规范的差别是巨大的.分析后认为这个规定是值得商榷的.最后根据宏观震害现象提出易引起滑坡的地质情况并对其进行了分析,为滑坡治理工程设计和以后的规范修编提供了方法和思路.