东南亚断裂构造的演化

本研究项目是采用诸如地质学解释、影像判读和地球物理探测等多种方法相结合进行的。在所得结果的基础上参考了越南国内外同行的一些资料编制了东南亚、越南及邻区的断裂构造图．其比例尺分别为1：4百万和1：1百万。分析所得结果显示出东南亚断裂构造演化的下列情况：1)在现今地质结构方面东南亚是欧亚岩石圈板块的东南部分．由一条消减带围绕．这条消减带的伸展从Myanmer开始,通过Nicobar,Java Timor直到东菲律宾。东南亚被Song Hong(即红河)断裂,Three Pagodas断裂和Hainam-Natuna断裂等2级断裂系统分成3个微板块。2)在早新生代．东南亚是分为5个微板块的。它们的分界断裂中有2个一级断裂(中央东海扩张带和Lupar-Kuching消减带)和3个二级断裂(即上述3个)。3)上述绝大多数二和三级断裂从晚新生代起活化且继承了从早新生代即已发生和发展了的二、三级断裂,但在某些条件下．运动方向却完全变成了相反,尤其是走滑运动的方向。我们的研究结果表明：在这一地区内,盆地、隆起、岩浆侵入、褶皱和局部断裂等构造的形成都取决于这些沿着一、二级走滑断裂的微板块运动。     

Eruption and emplacement of a laterally extensive, crystal-rich, and pumice-free ignimbrite (the Cretaceous Kusandong Tuff, Korea)

The Cretaceous Kusandong Tuff, Korea, is a thin (1–5 m thick) but laterally extensive (~ 200 km) silicic ignimbrite emplaced in a fluviolacustrine basin adjacent to a continental volcanic arc. The tuff has been used as an excellent key bed because of its great lateral continuity and unique lithology, characterized by the virtual absence of juvenile clasts and an abundance of quartz and feldspar crystals (up to 55–73 vol.%). The tuff is mostly massive and ungraded and locally shows crude internal layering, basal inverse grading and near-top normal grading of crystals, either erosional or non-erosional lower surfaces, and flat-lying to imbricated grain fabrics. Fragile intraformational clasts of mudstone and tuff are also included. These features provide only ambiguous information on the properties of the responsible pyroclastic density currents: i.e. whether they were dense and laminar or dilute and turbulent. The overall lateral continuity and sheet-like geometry of the tuff suggests, however, that the transport system of the currents was highly expanded, dilute, and turbulent. A plug-flow or slab-flow model cannot explain the origin of crude internal layering, imbricated grain fabrics, and the high crystal content, which is most likely the result of vigorous sorting processes within a dilute and turbulent current. Features indicative of deposition from a dense and laminar transporting medium are locally present, suggesting that a dense and laminar depositional system could develop locally at the base of the dilute and turbulent transport system. The virtual absence of juvenile clasts in the tuff is interpreted to be due to rapid ascent, sudden decompression, and full fragmentation of silicic magma into fine glass shards and crystals. Scarcity of basement-derived accidental components together with the absence of pumiceous fallout deposits beneath the tuff is interpreted to be due to shallow-level fragmentation of magma followed by immediate generation of pyroclastic density currents from shallow-level blasts at the onset of eruption. The eruption occurred through multiple vent sites in a short period of time, producing a seemingly single but actually composite ignimbrite unit. Such an eruption was probably possible because of a regional tectonic event within the basin or in its vicinity. It is proposed that a composite ignimbrite with the characteristics of the Kusandong Tuff can be an exemplary product of syntectonic volcanism that can provide an insight into the interpretation of structural and stratigraphic evolution of a sedimentary basin.     

Landslide Susceptibility Assessment Using Bagging Ensemble Based Alternating Decision Trees,Logistic Regression and J48 Decision Trees Methods: A Comparative Study

In this study, we have evaluated and compared prediction capability of Bagging Ensemble Based Alternating Decision Trees (BADT), Logistic Regression (LR), and J48 Decision Trees (J48DT) for landslide susceptibility mapping at part of the Uttarakhand State (India). The BADT method has been proposed in the present study which is a novel hybrid machine learning ensemble approach of bagging ensemble and alternating decision trees. The J48DT is a relative new machine learning technique which has been applied only in few landslide studies, and the LR is known as a popular landslide susceptibility model. For the model studies, a spatial database of 930 historical landslide events and 15 landslide affecting factors have been collected and analyzed. This database has been used to build and validate the landslide models namely BADT, LR and J48DT Predictive capability of these models has been validated and compared using statistical analyzing methods and Receiver Operating Characteristic (ROC) curve. Results show that these three landslide models (BADT, LR and J48DT) performed well with the training dataset. However, using the validation dataset the BADT model has the highest prediction capability, followed by the LR model, and the J48DT model, respectively. This indicates that the BADT is a promising method which can be used for landslide susceptibility assessment also for other landslide prone areas.     

Measurements of Rare Earth Element and Other Element Mass Fractions in Environmental Reference Materials (NIST SRM 1646a,NIST SRM 1400, IAEA‐395 and IAEA‐450) by INAA,ICP‐AES and ICP‐MS

INAA, ICP‐AES and ICP‐MS were used to elementally characterise four environmental reference materials – NIST SRM 1646a (Estuarine Sediment), NIST SRM 1400 (Bone Ash), IAEA‐395 (Urban Dust) and IAEA‐450 (Algae). An analytical scheme consisting of the three methods was first applied to NIST SRM 1646a to validate the methodology because it has been extensively analysed and has certified values for many elements. With repeated analyses of NIST SRM 1646a, the accuracy and measurement repeatability of the data obtained were evaluated based on two statistical calculations (zeta‐score and Horwitz ratio) and were observed to be good enough for the analytical scheme to be applied to similar sorts of environmental/geochemical samples. Applying the same approach to NIST SRM 1400, IAEA‐395 and IAEA‐450, enabled mass fractions of 29, 38 and 28 elements to be determined, respectively. Among these results, the data for rare earth elements are of particular interest, not only for IAEA‐450 but also for the other three reference samples. The data for Pr, Gd, Dy, Ho, Er and Tm in NIST SRM 1646a are newly reported in this study. By using small test portions (< 100 mg) for NIST SRM 1646a and IAEA‐395, and recommended minimum amounts for NIST SRM 1400 and IAEA‐450, sample homogeneity was evaluated.     

Biomarker-based Seawater Temperatures of Winter Sinking Particles and Core-top Sediment in the Ulleung Basin of the East Sea

Ocean Science Journal - This study evaluates the application of biomarkerbased temperature proxy data (alkenone with its resultant $$U_{37}^{K'}$$ index and glycerol dialkyl glycerol tetraether...     

Sinking Particle Flux in the Subtropical Oligotrophic Northwestern Pacific from a Short-term Sediment Trap Experiment

Time-series sediment traps were deployed in the subtropical oligotrophic northwestern Pacific (SONP) at three depths from August to September 2015 to better understand vertical flux of sinking particles. Sinking particles were collected at 5-day intervals over the sediment trap deployment period. The average total mass flux at water depths of 400 m, 690 m, and 1,710 m was 9.1, 4.4, and 4.1 mg m^-2day^-1, respectively. CaCO₃ materials constituted 50 to 70% of sinking particles while in comparison particulate organic carbon (POC) constituted up to 20%. A synchronous variation of total mass flux was observed at the three depths, indicating that calcite-dominated particles sank from 400 to 1,710 m within a 5-day period. POC flux at these water depths was 2.4, 0.38, and 0.31 mg m^-2day^-1, respectively. Our results indicate low transfer efficiencies of 16% from 400 to 690 m and 13% for the 400 to 1,710 m depth range. The estimated transfer efficiencies were significantly lower than those observed at the K2 station in the northwest Pacific subarctic gyre, presumably because of a prevalence of pico-cyanobacteria in the SONP. Because cyanobacteria have a semi-permeable proteinaceous shell, they are more readily remineralized by bacteria than are siliceous phytoplankton in the northwest Pacific subarctic gyre. Continued surface water warming and expansion of the SONP will likely have a profound impact on ocean acidification in the northwest Pacific, possibly affecting the transfer efficiency of sinking POC to the deep-sea.     

Modelling scour and deposition in harbours due to complex tsunami-induced currents

In this paper, a set of models responsible for hydrodynamics, sediment transport, and morphological evolution are introduced with their theoretical backgrounds, and it is explained how they are fully connected through a two-way coupling to yield an integrated sediment transport model applicable to tsunami cases. In particular, a fully nonlinear Boussinesq model with bottom shear-induced rotational terms is chosen for the hydrodynamic model in order to provide a better physical approximation of tsunami-related, near-bed hydrodynamics in the nearshore. A finite-volume scheme, stable and suitable for phase-resolving model runs longer than 10 simulated hours, is adopted in the numerical discretization. The accuracy and applicability of the developed model are investigated through numerical tests on various sediment problems in the shallow region. Calculated results agree well with existing experimental records. Finally, an ocean-wide, field-scale simulation of the 2011 Tohoku-oki tsunami is attempted, with a focus on the localized effects of tsunami-induced morphological changes at Crescent City Harbor and Santa Cruz Harbor (USA). Consistent with the reported observations, strong and vortical velocity fields are generated through the model and result in significant changes in morphological configurations. Depth variations and areas of scouring and deposition are compared between modelled and observed records, and the results are discussed. © 2019 John Wiley & Sons, Ltd.     

New bounds for the height limit of a vertical slope

Using the finite element method, the static and kinematic methods of limit analysis provide tools to solve many stability problems in mechanics of continuous media. The classic problem of the height limit of a Tresca or Mises vertical slope subjected to the action of gravity stems naturally from this theory in plane strain. Although the exact solution to this problem remains unknown, the present work has produced precise bounds using the static and kinematic approaches conjointly: the height limit is now between 3·760 and 3·786 C/ γ, γ being the weight per unit volume and C the soil cohesion. These tests also show that both methods, used on current workstations with industrial optimization codes such as XPRESS or OSL, are capable of solving any plane problem of limit loads in geotechnics or in structural calculus. Copyright © 2000 John Wiley & Sons, Ltd.     

Microphytobenthic biomass and species composition in intertidal flats of the Nakdong River estuary, Korea

Intertidal microphytobenthos (MPB) were investigated monthly from August 2006 to March 2008 at four different sites in the sand flats of Nakdong River estuary, Korea. Samples of surface sediment (ca. 1 cm) were collected, and chlorophyll a was extracted as biomass estimation. Species identification and enumeration were carried out by light microscopy, assisted where necessary by scanning electronic microscopy. Biomass varied between 0.47 and 16.58 μg cm⁻³, abundance changed from 5.25 to 414.75 × 10³ cells cm⁻³, while the Shannon diversity indexes ranged between 0.69 and 2.35 H′. Thirty-nine MPB taxa were identified, primarily composed of epipelic diatoms, among which Amphora and Navicula were the most abundant genera. Based on the biomass, abundance, species composition and their dynamics, MPB assemblages of sampling sites were grouped into three distinct communities corresponding to their sediment composition characteristics. Multivariate correlation analysis revealed that biomass was positively related to mud and very fine sand, negatively related to fine and medium sand, but not significantly related to environmental factors such as pore water nutrients, light intensity and salinity, which fluctuated rapidly during emersion period. Cluster analysis corroborated the division of MPB communities according to site types on seasonal scales, and also showed seasonality between sites by cluster of all summer groups. Principal component analysis identified that variability in species composition was significantly affected by mud, very fine sand, fine sand, light intensity, and sediment temperature. This study suggests that sediment composition plays an important role in the functioning of intertidal MPB communities in estuarine ecosystems.     

Trace metals in Japanese eel Anguilla japonica in relation to ecological migratory types and growth stages

In order to understand the metal concentrations in Japanese eel Anguilla japonica, nine elements were analyzed in the livers of different migratory types of eels collected from Tokushima region (south Japan). Migratory types were defined by examining the Sr:Ca ratio in otoliths. The results showed that there were significant differences in V, Cr, Cd, and Pb concentrations among the migratory types. Mature-sea-eels show a higher risk of metal accumulation than other migratory types of eels, and the concentrations of Mn, Cu, and Zn in mature eels were significantly higher than those in immature eels. The study suggests that the eel liver is a valuable bioindicator for trace metals; however, when using the eel as a bioindicator to reveal the pollutants in aquatic systems, life history analysis should be carried out for accurate interpretation of the results.