小秦岭-熊耳山地区金矿成矿的临界-超临界流体

临界-超临界流体对金属矿床，特别是对金矿成矿具有重要作用，对流体包裹体的特征研究表明，小秦岭-熊耳山地区石英脉型，构造蚀变岩型及爆破角砾岩型3种主要类型金矿床的成矿流体属临界-超临界流体，随着成矿作用由深到浅，由高温，高压到低温，低压的演化，临界-超临界流体也逐步演化成中低温非超临界流体，从而使现有的测试结果表明，目前只有少部分为超临界包裹体，大部分为非超临界包裹体。     

地地震多参数BP神经网络预测煤层厚度

依据煤层反射波运动学和动力学特征，提取出了波峰波谷振幅A1、平均频率Fa、主频带能量Qf1、低频带宽能量Qf和峰值频率Fmain等5个地地震特征参数。选取8组学习样本，利用4层BP（Back Propagation)人工神经网络模型，采用动量法和自适应调整的改进算法，训练BP网络，用训练好的BP网络预测煤层厚度。经实例验证，地震多参数BP网络预测煤层厚度精度高，是一种有效的煤厚预测方法。     

Quantification of electrical resistance to estimate NaCl behavior in a column under controlled conditions

Accurate prediction of solute transport processes in surface water and its underlying bed is an important task not only for proper management of the surface water but also for pollution control in these water bodies. Key issue in this task is an estimation of parameters as diffusion coefficient and velocity for solute transport both in water body and in the underlying bed. This estimation would greatly help us to understand the deposition and release mechanism of solute across the water-bed interface. In this study, a column experiment was conducted in laboratory to estimate the velocity and diffusion coefficient of sodium chloride (NaCl) in water body and underlying sand layer (bed). The column used with a diameter of 30 cm and a height of 100 cm, was filled with sand at the lower half part and water at the upper half part. Total 64 stainless steel electrodes were installed on its surface around. The sodium chloride solution was injected from the top of the column, and electrical resistance between electrodes was monitored for 71 h. Then the dimensionless resistance breakthrough curve was fitted with one dimensional analytic solution for solute transport and the related diffusion coefficient and velocity parameters were estimated. The results show that the NaCl transport velocity was high in the water body but extremely low in the underlying sand layer (bed). The diffusion coefficient estimated in sand layer coincides with those reported well. This indicates that the electrical resistance based solute transport parameter estimation method is not only effective but also has an advantage of multipoints monitoring. This is useful both in mapping solute transport parameter for solute transport process analysis and in providing parameter input for solute transport numerical modeling.     

P-T Paths Derived from Garnet Growth Zoning in Danba Domal Metamorphic Terrain, Sichuan Province, West China

Danba (丹巴) domal metamorphic terrain belongs to Songpan (松潘)-Ganze (甘孜) orogenic belt, where typical Barrovian and Buchan metamorphic zones are preserved. The former included chlorite, biotite, garnet, staurolite, kyanite and sillimanite zones, while the latter only developed silimanite+muscovite and sillimanite+K-feldspar zones. Integrated study has been carried on metamorphic reactions of garnet production and consumption, P-T paths and P-T-X-M phase relation and thermal tectonic model for Danba metamorphic zones. Petrological textures in thin sections show that garnet production and consumption in kyanite-sillimanite zone is mainly attributed to ChI+Ms+PI+Q=Grt+Bt+H2O and kyanite=sillimanite respectively. Based on mineral compositions, the geothermobarometry gives an average P, T condition of (4.9±0.3)×108 Pa, 543±30℃ for the first growth stage of the garnet and (5.8±0.3)±108 Pa, 534±29 ℃ for the second stage of garnet growth respectively. Anti-counter clockwise P-T paths were drawn using Gibbs method by NCMnKFMASH system for sample G98686 in the kyanite zone. The P-T-X-M modeling for the first mineral assemblages shows that the prediction is similar to the measured values in gossular, almandine and spessartine but mole fraction of pyrope and Fe/(Fe+Mg) deviated far from the contours; while that for the second mineral assemblages exhibits that the prediction is consistent with the measured value of pyrope, grossular content and Fe/(Fe+Mg) of garnet. A thermal tectonic model that there are at least three structure levels across the thrnst-decollement zones is presented according to the P-T paths, metamorphic grades and deformation styles for the staurolite-kyanite zone of the Barroviau type metamorphism, which will provide some constraints for the evolution of the nappe complex.     

中国桐柏大别构造带变质演化的岩石学证迹

桐柏大别构造带是秦岭造山带的东延部分，经历过多期次不同体制的构造运动，现今的桐柏大别山区是由一系列变质地体拼合而成，地体与地体之间为断层或韧性剪切带所围限各地体有自身变质变形史和PTt轨迹，但却有着碰撞造山带所共有的后造山抬升过程。本文揭示了随县群、红安岩群及大别杂岩中柯石英榴辉石、蓝晶铝直闪石片岩及紫苏石榴黑云母片麻岩的退变质再平衡结构特点。报道了大别山麻粒岩相变质年龄为1699Ma。各类岩石减压退变质再平衡结构，标志着后造山的隆升过程及其对桐柏大别构造带变质演化的启示。     

Lead isotope geochemical characteristics of Pb-Zn-Cu deposits on the southwestern margin of Tarim, and their significance

The polymetallic(Pb,Zn,Cu,etc) ore belt on the southwestern margin of Tarim is one of the major regions with the greatest prospecting potential in Xinjiang.Reported in this paper are the lead isotope data for 66 sulfide samples(including 50 galena samples,15 chalcopyrite samples and 1 pyrite sample) collected from such representative deposits as Tamu,Tiekelike,Kalangu,Abalieke,etc.in this ore belt.The Pb isotopic ratios of 206 Pb/204 Pb,207 Pb/204 Pb and 208 Pb/204 Pb in the galena samples range from 17.931 to 18.176,15.609 to 15.818 and 38.197 to 38.944,with the average values of 18.017,15.684 and 38.462,respectively.Those in the chalcopyrite samples range from 17.926 to 18.144,15.598 to 15.628 and 38.171 to 38.583,with the average values of 18.020,15.606 and 38.262,respectively.The pyrite sample has the Pb isotopic ratios of 206 Pb/204 Pb,207 Pb/204 Pb and 208 Pb/204 Pb to be 17.980,15.604 and 38.145,respectively.In combination with the previous Pb isotope data for sulfides,it is found that there is only a slight variation in the Pb isotopic composition of galena,chalcopyrite,sphalerite and pyrite in the ore belt.However,there is some difference in Pb isotopic characteristics between galena and chalcopyrite,especially the Pb isotopic composition of galena shows an obvious linear correlation with some other relevant parameters(e.g.β and γ).The comprehensive analysis suggested that lead in galena(maybe including sphalerite and pyrite) was derived principally from wall rocks and underlying basement,and that in chalcopyrite only originated from the basement.The single-stage model ages of these sulfides couldn’t indicate the time limit of metallogenesis(Pb,Zn,Cu,etc.),and the positive linear correlations for the Pb isotopic composition of galena are of no single-stage and two-stage Pb-Pb isochron significance.Furthermore,there are significant differences in Pb isotopic composition characteristics between the genetic type of deposits in this polymetallic ore belt and the Mississippi Valley type(MVT).In addition,the authors also pointed out that there is a phenomenon of differentiation(not paragenesis) for lead and copper elements during the process of metallogenesis in this ore belt.     

钛基柱撑累托石矿物材料的研究

在氮气环境中用TiCI4和HCI制成钛基柱撑液，采用离子交换法，用[Ti20O32(OH)12(OH2)18]^4 Dawson型Ti多核阳离子，交换累托石蒙皂石质晶层中的Na等阳离子，制成钛基柱撑累托石。通过电子探针定量分析、X射线衍射、红外光谱、热分析及魔角旋转核磁共振等方法，对钛基柱撑累托石的成分、结构和热稳定性进行了表征。钛基柱撑累托石具1．6nm的层孔隙，是一种很有应用前途的柱撑粘土矿物材料，有望在催化剂载体及环保材料领域中得到广泛的使用。     

贵州黑色岩系金-铂族元素地球化学特征及成因分析

为探讨贵州下寒武统黑色岩系中铂族元素物质来源及钼-镍、钒多金属形成的沉积环境与成矿作用,在钼-镍、钒多金属层及其顶底页岩、底部硅质岩中采集样品测试分析。通过对样品中金、铂族元素含量(质量分数)及其地球化学特征值研究,结果表明：黑色岩系中金及铂族元素含量显示协同变化特征;Pd富集,Ru、Ir亏损明显,Pt、Rh、Os基本持平或略有变化;样品的原始地幔标准值标准化模式配分曲线从Os、Ru、Rh、Ir、Pt到Pd大致呈“W”型,配分曲线略呈左倾,总体上呈现w(Pd)>w(Pt)>w(Os)>w(Rh)>w(Ru)>w(Ir)的变化关系;黑色岩系铂族元素来源与正常海水及海底热水喷流作用关系密切,地外来源可能性极小;黑色岩系钼-镍、钒多金属层中铂族元素的富集存在单独成矿作用或成矿作用的叠加,而且在钒多金属层内局部存在分层或条带分异。     

Retrogressive Microstructures:A Key to Post Collisional Uplift and Extension Tectonics of Ultrahigh-Pressure Metamorphic Rocks from Dabie Orogenic Belt,China

ThereisanunanimousunderstandingthattheUHPmetamorphisminDabie-SuluareaswasformedduringtheTri-assiccollisioneventbetweentheYangtzeandNorthChinacratons(Congetal.,l994$Zhouetal-,l996;Liouetal.,l994)-Eclogiteisthemostimportantrocktypeamongtheul-trahigh-pressure(UHP)metamorphicrocks.Accordingtotheiroccurrencethereare3typesofeclogites:typeIisen-clavesinultramaficintrusionsandasmembersinthelayeredmafic-ultramaficcomplex(Jahnl998);typeIispodsorlay-ersinthehighlymetamorphicsupracrustals(mainlying…     

全椒县范水洼金矿区控矿构造初步研究

研究区主要构造活动可分为3期：早期，发育以透入性的剪切劈理为特征的复式褶皱及倒转翼的逆冲剪切减薄拉断作用；中期，伸展作用；后期，脆性的挤压剪切破碎作用。通过详细地质构造剖面测制。建立了区内的主要构造格架：总体为一复式向斜一汪洼向斜，以杨柳岗组中上段为两翼，以琅琊山组为核，二级褶皱总体表现为向斜开阔，背斜紧闭，向南东倒伏的特征；二级褶皱的转折端为主要的控矿容矿构造，矿(化)体主要赋存于复式向斜的核部、背斜转折端。二级褶皱背斜转折端的拉张垮塌破碎角砾岩及翼部特别是近倒转翼的剪切破碎带是最重要的控矿容矿构造。