In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.     

碳水化合物的组合合成

碳水化合物的组合合成是一项新兴技术，该技术可以在短时间内合成大量用于进行生物活性筛选的寡糖及拟糖物。液相与固相合成技术可以极大地加快药物研究与开发进程。作者针对该技术在碳水化合物合成方面的研究进展情况进行讨论。     

红海湾水域溶解氧、pH值、盐度和营养盐分布特征及相互关系研究

通过１９９８年６月对广东省红海湾海水养殖水域环境因子的调查,阐述了海水中溶解氧、盐度、ｐＨ值和营养盐的分布特征及其变化规律,并讨论了它们之间的相互关系,结果表明,溶解氧及海水ｐＨ值随温度由北（除１５￣１７号站）向南（除６号站）增高而增高。同时证实了光合作用是导致溶解氧含量和ｐＨ值增高的主要原因。而营养盐与盐度呈密度的负相关,浮游植物总量随营养盐由北向南降低而明显增高。     

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

藻类分子生物技术两年评─—与藻类活性物质研究有关的生物技术

根据1992年6月—1994年6月国内外发表资料，评述海洋藻类活性物质研究的生物技术及最新成果。认为，海洋生物活性物质研究的重心正转向与海洋生物技术有关的研究。运用生物技术筛选、提取并生产藻类活性物质已经成为这一领域的主流。综合文献表明，藻类活性物质研究的生物技术正走向成熟，大量的活性物质被发现，光生物反应器将成为主要的下游生产技术，通过藻类基因工程生产药物已初现端倪。     

超浅海风暴潮的数值模拟(一)——零阶模型对渤海风潮的初步应用

由我国北方的寒潮或冷空气所引起的渤海风潮,按文献的分析,该属于“超浅海风暴潮”类型.以渤海风潮为例,按超浅海风暴潮理论进行数值计算,不仅对该理论是一有力的检验,且对探讨渤海风潮的机制和预报也是一个有益的参考. 将冷锋所造成的大风风场重现在计算网格上,在现场海面风资料极度贫乏的情况下,显然是一较难的课题.本文仅就发生渤海风潮时,渤海上空风场的几个主要力学特征,设计了几个理论模式风应力场,对渤海风潮进行了数值计算,以期获得全过程概貌及主要特征.计算结果达到了这一预期目的.     

不同产地龙须菜光合色素的比较研究

龙须菜是一种重要的产琼胶海藻。本文分析了从青岛、石岛、龙须岛采集的龙须菜的光合色素组成、光谱特性、光合作用速率及生长速度,从而研究扑光色素的组成与光合作用、生物物质积累之间的关系。三个龙须菜的产地之间相距上百里到几百里,彼此之间进行遗传物质交流的机会较少,存在着地理隔离的可能性。本研究表明,不同产地龙须菜光合色素的组成有差异:青岛的材料藻红蛋白含量较高,石岛及龙须岛材料叶绿素α含量较高。不同产地的材料荧光光谱也有差异。与其他产地的材料相比,龙须岛材料光补偿点较低,生长速度较快。本文对今后的生产需要提供了一些生物学参数。     

从第九届国际光合作用大会看藻类分子遗传学发展趋势

根据１９９２年８月３０日－９月４日在日本名古层如开的第九届国际光合作用大会上交流的以藻类为材料的研究论文，综述了分子遗传学方面的研究成果。认为这些成果体现了光合作用研究的最新进展，蕴含有一定的应用前景；表明类分子遗传学不仅是藻类学研究领域的带头学科，而且已经活跃在光合作用等重大生物学问题研究的前沿；反映了藻类分子遗传学向解决生物学重大问题和推动藻类资料开发方向发展的趋势。