Effect of nitrogen and phosphorus on the growth of a red tide dinoflagellateScrippsiella trochoidea (Stein) Loeblich III

Scrippsiella trochoidea (Stein) Loeblich III was grown in a nitrogen-or phosphorus-limited batch culture system in laboratory. Growth rates and cellular Chl-a were measured as functions of nitrate and phosphate concentrations. Growth rates were hyperbolic with both nitrate and phosphate concentration and fit the Monod equation. The minimum cell quota of nitrogen and phosphorus and then the optimum N∶P ratio ofS. trochoidea were estimated in this study. Measurement of phosphate concentration in Jiaozhou Bay suggest that phosphorus is the limiting factor ofS. trochoidea growth. Contribution No. 3679 from the Institute of Oceanology, Chinese Academy of Sciences. Project 39790110 supported by NSFC, the study aslo supported by the National Climbing Project B (PDBG-7-2) and partly supported by an MF grant from Hong Kong University of Science and Technology.     

海洋动物体石油烃污染评价标准参考值的探讨

目前,国内外尚无颁布任何海洋生物石油污染评价标准,为了满足海洋生物石油污染评价的需要,本文采用综合分析与毒理学分析相结合的方法,探讨和提出了海洋动物石油污染评价标准参考值,海洋鱼类、贝类和甲壳类的石油污染评价标准参考值（干重）分别为１５、７０ 和２５ ｍ ｇ／ｋｇ。     

西安国贸大厦沉降监测方案设计与数据综合分析

本文对西安国贸大厦沉降监测技术方案进行了讨论,着重结合有关工程地质资料对沉降进行了几何分析和物理分析,探讨了沉降引发的原因及建筑物变形规律     

基于Oracle Spatial的空间数据库缓存的关键技术

Oracle Spatial是目前发展得比较成熟的对象关系型空间数据库存储模型,它实现了空间数据与属性数据的一体化存储,可以定义特定的数据类型,具有开放的存储格式,为GIS数据共享提供新的解决方案;但由于其采用扩展结构的空间数据库模型,对空间数据进行间接存取,数据存储和获取的效率较低。本文在阐述了扩展结构空间数据库模型的优势和局限性的基础上,提出采用缓存技术来提高数据访问效率,重点研究了空间数据库客户端缓存的关键技术,包括缓存实现机制、数据编码方法、数据一致性控制等,并给出实验对比数据,证明了空间数据缓存技术对空间数据尤其是大数据量空间数据的读取上所取得的成效。最后,本文指出了这一技术尚存在的问题及初步解决思路。     

可拓分类方法及其在流动单元分类中的应用

可拓学是研究事物拓展的可能性和拓展规律与方法的科学,它可以广泛的应用于各种矛盾和对立问题的解决.可拓分类方法是利用可拓学理论对事物类型归属进行研究的动态分类方法.为了解决储层流动单元分类中现存误判率较高的问题,本文利用可拓分类方法对储层流动单元分类进行了研究,并把利用可拓分类获得的流动单元分类结果与灰关联聚类法判别分析结果进行了比较,发现可拓分类方法具有更强的判别能力,具有实用性强、误判率低的特点,判别准确率可比灰关联聚类法提高15%.这种方法不仅仅适用于流动单元分类,对于油气勘探开发的很多环节都将具有适用性.     

天水-秦安一带中新世黄土堆积区沉积-地貌演化

前人的构造地质学研究,将天水-秦安一带的中新世黄土分布区划归两个不同的构造单元.文章基于野外调查和已有年代地层学工作,结合前人成果,对该区新生代沉积-地貌演化历史进行研究,并划分为以下主要阶段:1)古近纪初南部秦岭山地的剥蚀,使本区在原有基岩准平原地形的基础上,形成以冲洪积平原为主的地形.古近纪末-新近纪初的构造活动使冲洪积平原解体,在秦安地区形成基岩台地与沉陷盆地相间、天水-西和地区形成拉分盆地与隆起山地交错的地貌景观,这些高地为中新世黄土堆积提供了地形基础.2)中新世从22Ma到11Ma,基岩台地和相对平缓的高地上堆积典型黄土-古土壤序列,盆地内则主要发育次生黄土等洼地沉积,表明研究区类似于今天的黄土高原.3)中新世晚期约11Ma起发生的一次侵蚀事件,使研究区的一些小盆地内发育河流相和间歇性浅湖相沉积,秦安一带的黄土堆积也遭到侵蚀,形成的洼地内发育黄土状土或洼地静水沉积,其中包含较多哺乳动物化石,而大范围的相对平坦高地上一直继续发育黄土-古土壤序列.这次侵蚀对本区内甘肃群的沉积多样性有重要贡献,但一直没有深水湖泊发育的条件.4)发生于3.5Ma以后的另一次重大侵蚀,奠定了该区今天狭窄长墚地形的基础,是第四纪黄土堆积在本区保存较差的主要原因.     

Thermal depolymerization of kerogen and formation of immature oil

Two Chinese immature oil shales from the continental deposits of kerogen type I and II have been thermally treated combined with the technique of supercritical fluid extraction at 630–650 K and 15–25 MPa in a semi-continuous laboratory scale apparatus. Toluence is selected as the solvent. Up to 70–80% of the kerogen matrix can be converted to a thermal bitumen and extracted simultaneously. The chemical structural parameters from the NMR, IR, XRD, ESR and EA analyses of the kerogen and the thermal bitumen show striking resemblance in nature. It implies that the thermal bitumen is primarily a depolymerized product of the kerogen. Based on the GC/MS spectra of the aliphatic eluate of the thermal bitumen, the predominance of the odd/even ratio of the alkanes and the epimeric ratios, such as 20S(20S + 20R) of C-29 steranes and 22S/(22S + 22R) of C-32 terpanes, show that the maturity of the thermal bitumen from these oil shales is comparable to that of commercial immature oils from East China. The thermal bitumen is thought to be an intermediate product of the thermal degradation of kerogen.Since the thermal bitumen is mainly composed of asphaltenes and resins, it has a structure of gel. The gel-state bitumen may turn to sol-state readily due to its low aromaticity and polarity, or due to selective adsorption of asphaltenes by clay minerals. Then the migration potential of the bitumen is enhanced.Consequently, under favorable geological conditions, the thermal depolymerization of kerogen seems to be a probable mechanism to explain the formation of immature oils.     

节气与灾害

节气是我国古人的创见,它属于东方科学观点,在农时上具有重大意义。除此之外,我们发现,它在灾害预测上也有价值。我们曾发现上海的龙卷风以及与我国同纬度的美国的龙卷风的发生在节气日占优势。今年以来我们对我国的灾害性天气作了检验,发现绝大多数也发生在节气日或其附近,其余多在期望日或其附近。现列举于下:     

Research on the regionalQ values of coda waves for the aftershocks in Luquan,Yunnan of 1985

Based on the scattering coda model by which local and regional earthquakes are interpreted (K. Aki, 1969), and using observational coda data of 68 aftershocks of the 1985 Luquan, Yunnan earthquake registered by the VGK seismographs installed at 12 stations in the Yunnan regional short-period network, theQ-values of coda waves are calculated respectively for 6 time intervals. It is observed that within the frequency range of 0.40–1.65 Hz of the observed data, theQ-values are closely related with the frequencies and the calculated codaQ ranges between 80–240 with the coefficient of frequency dependence η=0.45. The calculated source factorsB(f> _p) of the coda waves which indicate the scattering strength are mostly within the order 10^?23–10^?24. Areas with lowQ-values present high scattering. It should be noted that by comparing data obtained before and after the Luquan earthquake, clear changes can be detected in theQ-values measured at stations close to the epicentral region, and that theQ-values of the aftershock coda are less than about one half of the pre-shock values. It may be mentioned that the time-dependent regional variations of theQ-values might possibly bring about practical significance in earthquake prediction. Moreover, aftershock focal parameters are determined. Through discussions on the quantitative relations between the focal parameters, we get: 1gE=1.59M _L+ 11.335;E=(2.10 × 10^?5)M ₀; length of focal rupturea=0.40?0.80 km for 3.0≤M _L<5.0 events; stress drop Δσ=(6.0–130) ×10⁵ Pa. Through interpretation of the data, we have also learned the important characteristics that there is no linear relation between the stress drops and the earthquake magnitudes.     

滑坡灾害预报的非线性动力学方法

基于现代反演理论,建立了滑坡灾害预测的非线性动力学模型,给出了可预报时间尺度的确定方法及稳定性判断准则。通过实例分析表明,非线性动力学分析方法是行之有效的。