内蒙古科尔沁右翼中旗协和尔斯德中生代火山沉积地层时代研究

内蒙古科尔沁右翼中旗协和尔斯德一带出露一套中生代地层,岩石组合主要为酸性火山碎屑岩、火山碎屑沉积岩夹碎屑沉积岩及酸性火山熔岩。1∶50000区调依据在该套地层上部层位发现的木化石组合确定其时代为中—晚侏罗世,结合岩石组合,将该套地层划分为上侏罗统满克头鄂博组。为了准确厘定该套地层时代,为木化石延限研究及区域生物地层划分对比提供依据,本次研究在低于产木化石层位的酸性火山碎屑岩中采取了锆石测年样品(LA-ICP-MS),获得锆石U-Pb年龄(165±1)Ma,时代为中侏罗世。同时采取了侵入该套地层的斑状细晶闪长岩测年样品,获得锆石年龄(131±1)Ma,限定了地层形成的上限年龄。根据岩性组合的区域对比、测年结果、木化石组合时限、地层产状特征,认为该套地层应划为中侏罗统新民组,是突泉火山-沉积盆地充填物的一部分。     

泾阳南塬蒋刘4#滑坡特征及成因机制

2016年3月6日,泾阳南塬蒋刘村发生了约2×104 m3的小型黄土滑坡。滑坡发生后,在对滑坡现场进行详细的地质调查基础上,结合无人机航测和三维激光扫描综合手段,对滑坡的基本特征及成因机理进行了初步分析。结果表明:长期引水灌溉是滑坡发生的基本条件;坡脚滞水软化作用、与灌溉渠较短的渗透距离、坡脚冻结黄土春季解冻是导致滑体发生的直接原因;底部饱和泥化黄土的铺垫及导流作用,是导致其滑程较远的根本原因。该类滑坡近几年来发生频率较高,为泾阳南塬滑坡演化后期的主要发生类型,具有一定的特殊性,值得深入研究。     

络合剂淋洗Cu污染粉土的土柱试验研究

以当前我国备受关注的土体污染为背景,通过土柱试验研究了不同络合剂对Cu的淋洗效果,结果表明:乙二胺四乙酸二钠二水合物（ethylenediaminetetraacetic acid disodium saltdihydrate,EDTA）淋洗效果最佳,柠檬酸（citric acid,CIT）次之,氨三乙酸三钠盐单水合物（nitrilotriacetic acid trisodium salt monohydrate, NTA）淋洗效果相对最差;使用不同浓度的EDTA淋洗负载量为150 mg/kg的Cu污染土,浓度增大并未有效促进Cu的解吸,而较小浓度（0.005 mol/L）的EDTA是有效且经济的浓度,其对Cu的去除率达84%;0.015 mol/L的EDTA淋洗不同负载量的Cu污染土,随负载量增加,淋洗率下降,最高去除率为84%,但去除量增加;研究结果可为重金属污染土的淋洗修复工艺提供理论参考依据。     

干湿循环作用下红土抗剪强度与微结构关系研究

针对云南红土型水库因水位升降引起库岸土体干湿循环的客观实际,研究干湿循环作用下库岸红土抗剪强度与其微结构的变化规律,揭示二者之间的内在联系,为研究红土型库岸失稳提供依据。通过红土试样的干湿循环试验,模拟水库蓄水和库水位反复升降引起的库岸红土干湿循环作用。结果表明:（1）在一定初始干密度条件下,红土的黏聚力、内摩擦角和抗剪强度均随干湿循环次数的增加而非线性减小,但在干湿循环次数约10次时趋于稳定。（2）干湿循环作用导致红土微结构发生变化。当初始干密度分别为1.2,1.3,1.4 g/cm3、干湿循环次数达10次时,试样红土颗粒数量降幅依次为45.4%,38.2%,35.7%;孔隙率增幅依次为52.6%,45.9%,40.4%;孔隙面积增幅依次为64.4%,58.2%,50.8%。（3）在干湿循环作用下,红土黏聚力与红土颗粒的定向度和平均圆形度呈正相关关系,相关系数R分别为0.985和0.923。内摩擦角与孔隙率和孔隙面积呈反相关关系,相关系数R分别为-0.936和-0.912。干湿循环作用导致红土微结构的改变,从而引起红土宏观力学性质的变化。     

辽宁阜新北部至内蒙古库伦旗地区第四系冲、洪积沉积特征

辽宁阜新北部至内蒙古库伦旗地区的第四系冲、洪积地层分布广泛,但由于冲、洪积物岩性、岩相比较单调,在纵、横向上变化快,不易进行深入的研究.根据成因、孢粉以及形成时代将研究区第四系冲、洪积物划分出中更新统冲积物、上更新统冲洪积物、下全新统冲洪积物、中全新统冲积物、上全新统冲积物5个填图单位.不同时期的冲、洪积物沉积特征及沉积环境各具特色,形成了不同的地貌特征.确定冲、洪积物的沉积标志,并对其进行详细的划分,可以为研究区甚至我国整个北方地区提供第四系冲、洪积物各方面深入研究的资料.     

利用GPR天线-目标极化的瞬时属性分析方法探测LNAPL污染土壤

轻非水相流体(LNAPL)泄漏后会对土壤和地下水造成严重污染,为了准确探测出LNAPL泄漏范围,本文将GPR天线-目标极化的瞬时属性分析方法应用于轻非水相流体污染土壤探测的研究中。采用注入柴油的石英砂砂箱在实验室建立污染土壤模型,利用探地雷达对该污染土壤分别进行天线方位为0°、90°的测量。LNAPL土壤污染物形状、大小、结构并不规则,因此可以通过0°和90°方位天线测量来分析天线-目标极化特征,了解目标物的走向、形状等地下介质信息。通过对预处理后的包含天线-目标极化特征的信息进行瞬时属性分析,LNAPL污染范围可以被清晰地识别,提高了GPR探测能力。     

Study on the deformation and failure modes of filling slope in loess filling engineering: a case study at a loess mountain airport

Lvliang airport is a typical loess filling engineering located in 20.5 km north of Lvliang City in Shanxi Province, China. By the end of March 2012, 14 fissures extending more than 7.5 m were observed in a loess-filled slope, of which the longest fissure is up to 82 m. Field monitoring and laboratory tests have been performed to investigate the slope failure modes. The test program includes wetting tests on unsaturated compacted samples and stress path tests on saturated samples. Field monitoring and observations show that differential settlement caused by non-homogeneity in compacted loess density might lead to the formation of fissures in the loess-filled slope. It was founded that the wetting deformation contributed to the development of differential settlement. Fissures are the essential factor for the loess-filled slope failure. Four deformation stages exhibit in the loess-filled slope prior final failure including development of the fissures, softening of the compacted loess, creeping of the slope leading edge and fissuring of the trailing edge and formation of the through-sliding surface. Development of the sliding surface mainly includes upward and downward expansion of the fissures. Upward expansion is a wetting failure process in loading condition, while downward expansion is a load-off wetting process. In addition, development of the sliding surface is accelerated by softening of the compacted soils as a result of water infiltration. Therefore, the key for taking countermeasures against filling landslides is to monitor and control the development of differential settlement and fissures in the slope shoulders. Digging out and extra-filling the fissures are an effective way for preventing these landslides.     

Semi-analytical solutions for vertically and laterally loaded piles in multilayered soil deposits

In geotechnical practice, it is of considerable importance to assess the behavior of vertical–lateral coupled loading piles in multilayered soil deposits. This study deals with a semi-analytical formulation for the performance of a pile suffering from combined vertical and lateral loads. The emphasis is on quantifying the mobilization of the subgrade reaction provided by the layered soil stratums. In the proposed method, subgrade reactions, correlated with both the accumulative axial load transfer and side resistances depending upon the pile–soil interaction, are abstracted as a series of nonlinear springs in both vertical and lateral directions. On account of this, an alternative transfer matrix method is applied to characterize the pile reaction along the depth under the identified boundary conditions atop the pile; meanwhile, the condition of static equilibrium, between two specific pile segments located at the border of soil layers, is also essential. On this basis, validation of the solution is conducted by comparing with observations from experiments and predictions obtained from other existing methods. In addition, the influence of properties in shallow soil layer and the vertical load on the lateral response of the pile is also discussed. The results indicate a reduction in the lateral displacement and the maximum bending moment within the pile with the increase in the shallow soil stiffness, but a growth with the increase in vertical load due to the “P-Δ effect.”