长白山自然保护区旅游灾害及其防治对策

旅游灾害越来越受到人们的重视,文章通过对长白山自然保护区常见灾害类型的分析,建立了灾害管理系 统框架模型,为降低和消除旅游灾害,提出了防范对策。     

层控夕卡岩型矿床成矿系统的元素活动性及质量迁移--以铜陵冬瓜山铜矿床为例

应用改善了的质量平衡方程研究冬瓜山层控夕卡岩型铜矿床成矿系统的元素活动性及质量迁移，结果表明：系统中Zr,Hf,Y和Nb为不活动元素，其余均为活动元素。主量元素中仅CaO为迁出组分，其质量迁移量为84％，其余均为带入组分，带入量最大的SiO2的质量迁移量高达2384％；稀土元素均为带入组分，其中，中稀土较轻稀土和重稀土的活动性更强；其它微量元素中，带入序列由强到弱为：Cr→Ta→Sn→Th，迁出序列由强至弱依次为：U→Sb→Ni—Sr→Ba→Bb→Co→W；成矿元素Cu和Ag为带入组分，其中Cu的带入量最大，质量迁移量高达1200％。本文还得出两点具普适性认识：①稀土元素较其它微量元素对体系条件的变化更为敏感，且往往表现出明显的规律性变化，能更好地示踪地质地球化学过程。②不同元素在不同体系中的行为特征差异极大，仅凭经验判定某一元素为不活动元素往往不可靠。因此，在开展质量平衡研究时，首先采用适当方法确认体系的不活动元素是一项不可或缺的前提工作。     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

Aseismic negative dislocation model and deformation analysis of crustal horizontal movement during 1999——2001 in the northeast margin of Qinghai-Xizang block

Through numerical simulation for GPS data, aseism/c negative dislocation model for crustal horizontal movement during 1999-2001 in the northeast margin of Qinghai-Xizang block is presented, combined with the spatial distri-bution of apparent strain field in this area, the characteristics of motion and deformation of active blocks and their boundary faults, together with the place and intensity of strain accumulation are analyzed. It is shown that: a) 9 active blocks appeared totally clockwise motion from eastward by north to eastward by south. Obvious sinistral strike-slip and NE-NEE relative compressive motion between the blocks separated by Qilianshan-Haiyuan fault zone was discovered; b) 20 fault segments (most of them showed compression) locked the relative motion between blocks to varying degrees, among the total, the mid-east segment of Qilianshan fault (containing the place where it meets Riyueshan-Lajishan fault) and the place where it meets Haiyuan fault and Zhuanglanghe fault, more favored accumulation of strain. Moreover, the region where Riyueshan-Lajishan fault meets north boundary of Qaidam block may have strain accumulation to some degree, c) Obtained magnitude of block velocities and locking of their boundaries were less than relevant results for observation in the period of 1993-1999.     

GPS数据处理中IGS基准站的选取

IGS基准站的选取问题是目前GPS数据处理中讨论的热点问题。文中从基准站选取的几何意义、统计意义和物理意义3个方面分析讨论了IGS基准站的选取问题。并通过对理论及大量算例的分析，提出了IGS基准站选取的一般原则。     

沂沭断裂带中部地区地震波速及地壳厚度的测定

选取1990～2001年发生在沂沭断裂带中部地区的23次ML2．3～4．0级地震为基础资料，对沂沭断裂带中段及附近地区地震波速进行了研究。结果表明，研究区-↑Vp=5．83km／s，-↑Vs=3．54km／s。同时，根据反射波走时方程，得出该地区反射波速度Vp11=6．21km／s，Vs11=3．65km／s和平均地壳厚度为37km。     

陆面特征非均一作用参数化及其对区域气候影响的数值模拟试验

本文首先改进了陆地下垫面特征非均一性的次网格尺度参数化方法，然后利用三维地气耦合的区域气候模式，设计一系列值试验，研究了下垫面特征改变对区域气候环境变化的影响，主要分析了陆地表面特征变化对我国苏南附近地区夏季温度化的影响，结果表明采用地下垫面特征非均一作用的次网格尺度参数化方法对于改进数值模拟结果的质量有一定效果。     

用光盘转录航空物探数据

航空物探数据具有较高的保存开发价值,由于磁带保存的有效年限较短,航空物探勘查所获资料存在着丢失的危险。航空物探数据光盘转录将解决这些难题,为航空物探资料的二次开发和利用创造条件。本光盘数据从任一与RICOHRS-5060E型光盘机兼容的光盘机上均可读出。     

金伯利岩中新发现的两种Zr-Ti、REE-Ti氧化物矿物──上地幔含大阳离子Cr、Ti、Fe氧化物矿物研究之四

在研究沂蒙矿、蒙山矿等地幔矿物时，新发现了两种Zr－Ti、REE－Ti氧化物矿物。Zr－Ti氧化物新相6个样品点的探针成分分析（wt％）：TIO227.756～46.811，ZrO231.724～58.092，TFeo2.75～5．82，CrO31．728～4．765，Nb2O51．353～4．357，Ta2O50．155～2.814，SiO20．894～13．749，主次元素的成分变化幅度均较大，但以氧为4计算的阳离子总数均为2，因此分子式可简写为（Ti，Zr，Si，Fe）2O4或（Ti，Zr）2O4，与人工化合物ZrTiO4相似。REE－Ti氧化物矿物新相的成分也较复杂，主要元素为REE（Ce，Nd，La，Sm，Pr…）及Ti，次要元素有Nb，根据五个样点的探针分析结果，简化的分子式（Ce…）2（Ti…）3O9，与人工化合物Ce2Ti3O8.7类似，属等轴晶系。两个新矿物相均产于蒙山矿中的微裂隙和熔融交代海绵边中，呈斑点状、蠕虫状、微脉状，组成元素复杂，不同颗粒分析点成分有差异，且在同一微脉中成分也有变化，反映了这两种新矿物相是非平衡的交代一结晶产物。从矿物的产出关系和成分的特征来看，它们的形成与地幔流体交代作用有关。