吐哈盆地中央构造带正反转演化特征

吐哈盆地中央构造带由火焰山构造和七克台构造组成。中央构造带形成于三叠纪晚期至侏罗纪早期,表现为伸展构造特征,生长断层上盘地层厚度明显大于下盘,并于断层上盘所在的台北凹陷形成沉降中心。晚侏罗世,由于拉萨陆块与欧亚大陆的碰撞作用导致吐哈盆地由伸展盆地转变为挤压盆地,中央构造带也于此时发生构造反转,由早期的伸展正断层转变为挤压逆断层。发生于55Ma的喜山构造事件对天山地区产生了深刻的影响,但影响时间略有滞后,大致发生在晚渐新世至早中新世,中央构造带即在此次构造事件中强烈变形,逆冲出露于地表。     

论构造耦合作用

构造耦合作用是一种普遍存在的地质现象。现今东、西太平洋的构造差异及古太平洋和现今太平洋大陆边缘构造差异与俯冲的洋壳板块性状有关,即:①俯冲角度;②俯冲角度的改变;③俯冲速率;④俯冲速率的改变;⑤俯冲深度;⑥俯冲板块前缘与海沟间的水平距离;⑦俯冲板块在670km上、下地幔界线处的构造形态;⑧俯冲板块的位移及位移方向。这种深部构造活动对浅部构造形成的制约和影响,是活动大陆边缘构造耦合现象的具体表现。中国西北部的盆山耦合现象是大陆内部的构造耦合作用,印度板块与欧亚板块碰撞产生的远距离效应,导致中亚地区产生陆内A型俯冲,A型俯冲是造成盆地消亡、山系形成的重要因素。     

岩石断裂作用的复杂性和混沌动力学

断裂是一个复杂的动力学体系,受到岩石结构、反应、流体迁移、应力、岩石变形和力学等多种地质因素和过程的耦合控制。本文建立了断裂体系的反应-输运-力学耦合动力学模型并编制了模拟程序。以湖南水口山矿区为例,通过动力学模拟表明不同地层岩性的断裂渗透率大小和演化特征存在显著差异,断裂作用促使岩石渗透率的空间非均匀性增强,从而有利于流体的局部汇聚和矿体的形成。断裂中压力随时间呈现出非周期振荡变化,反映了断裂演化的混沌特征。     

PowerBuilder中MapInfo的跨平台集成地图技术的实现

随着地理信息系统的广泛应用,越来越多的大型系统中都需要集成地图的某些功能,为此探讨了在PowerBuilder中MapInfo的跨平台集成地图技术的实现。     

GIS支持下的全国广播电视信息管理系统的建设

介绍了GIS支持下的与专业信息充分结合的 ,为领导和专业技术人员提供决策支持等方面的实例。从技术和应用角度论述了服务于全国广播、电视信息管理和决策的“GIS支持下的全国广播电视覆盖信息管理系统”。对构成系统的数据组成、数据库结构、主要功能模块、应用效果等情况进行了系统论述     

Continental subduction and exhumation of UHP rocks. Structural and geochronological insights from the Dabieshan (East China)

In the Dabieshan, the available models for exhumation of ultrahigh-pressure (UHP) rocks are poorly constrained by structural data. A comprehensive structural and kinematic map and a general cross-section of the Dabieshan including its foreland fold belt and the Northern Dabieshan Domain (Foziling and Luzenguang groups) are presented here. South Dabieshan consists from bottom to top of stacked allochtons: (1) an amphibolite facies gneissic unit, devoid of UHP rocks, interpreted here as the relative autochton; (2) an UHP allochton; (3) a HP rock unit (Susong group) mostly retrogressed into greenschist facies micaschists; (4) a weakly metamorphosed Proterozoic slate and sandstone unit; and (5) an unmetamorphosed Cambrian to Early Triassic sedimentary sequence unconformably covered by Jurassic sandstone. All these units exhibit a polyphase ductile deformation characterized by (i) a NW–SE lineation with a top-to-the-NW shearing, and (ii) a southward refolding of early ductile fabrics.

The Central Dabieshan is a 100-km scale migmatitic dome. Newly discovered eclogite xenoliths in a Cretaceous granitoid dated at 102 Ma by the U–Pb method on titanite demonstrate that migmatization post-dates HP–UHP metamorphism. Ductile faults formed in the subsolidus state coeval to migmatization allow us to characterize the structural pattern of doming. Along the dome margins, migmatite is gneissified under post-solidus conditions and mylonitic–ultramylonitic fabrics commonly develop. The north and west boundaries of the Central Dabieshan metamorphics, i.e. the Xiaotian–Mozitan and Macheng faults, are ductile normal faults formed before Late Jurassic–Early Cretaceous. A Cretaceous reworking is recorded by synkinematic plutons.

North of the Xiaotian–Mozitan fault, the North Dabieshan Domain consists of metasediments and orthogneiss (Foziling and Luzenguang groups) metamorphosed under greenschist to amphibolite facies which never experienced UHP metamorphism. A rare N–S-trending lineation with top-to-the-south shearing is dated at 260 Ma by the ⁴⁰Ar/³⁹Ar method on muscovite. This early structure related to compressional tectonics is reworked by top-to-the-north extensional shear bands.

The main deformation of the Dabieshan consists of a NW–SE-stretching lineation which wraps around the migmatitic dome but exhibits a consistently top-to-the-NW sense of shear. The Central Dabieshan is interpreted as an extensional migmatitic dome bounded by an arched, top-to-the-NW, detachment fault. This structure may account for a part of the UHP rock exhumation. However, the abundance of amphibolite restites in the Central Dabieshan migmatites and the scarcity of eclogites (found only in a few places) argue for an early stage of exhumation and retrogression of UHP rocks before migmatization. This event is coeval to the N–S extensional structures described in the North Dabieshan Domain. Recent radiometric dates suggest that early exhumation and subsequent migmatization occurred in Triassic–Liassic times. The main foliation is deformed by north-verging recumbent folds coeval to the south-verging folds of the South Dabieshan Domain. An intense Cretaceous magmatism accounts for thermal resetting of most of the ⁴⁰Ar/³⁹Ar dates.

A lithosphere-scale exhumation model, involving continental subduction, synconvergence extension with inversion of southward thrusts into NW-ward normal faults and crustal melting is presented.     

POSITIVE INVERSION STRUCTURE OF THE CENTRAL STRUCTURE BELT IN TURPAN-HAMI BASIN

The central structure belt in Turpan-Hami basin is composed of the Huoyanshan structure and Qiketai structure formed in late Triassic-early Jurassic, and is characterized by extensional tectonics. The thickness of strata in the hanging wall of the growth fault is obviously larger than that in the footwall, and a deposition center was evolved in the Taibei sag where the hanging wall of the fault is located. In late Jurassic the collision between Lhasa block and Eurasia continent resulted in the transformation of the Turpan-Hami basin from an extensional structure into a compressional structure, and consequently in the tectonic inversion of the central structure belt of the Turpan-Hami basin from the extensional normal fault in the earlier stage to the compressive thrust fault in the later stage. The Tertiary collision between the Indian plate and the Eurasian plate occurred around 55Ma, and this Himalayan orogenic event has played a profound role in shaping the Tianshan area, only the effect of the collision to this area was delayed since it culminated here approximately in late Oligocene-early Miocene. The central structure belt was strongly deformed and thrusted above the ground as a result of this tectonic event.     

Origin and tectonic significance of a Mesozoic multi-layer over-thrust system within the Yangtze Block (South China)

In the Yangtze Block (South China), a well-developed Mesozoic thrust system extends through the Xuefeng and Wuling mountains in the southeast to the Sichuan basin in the northwest. The system comprises both thin- and thick-skinned thrust units separated by a boundary detachment fault, the Dayin fault. To the northwest, the thin-skinned belt is characterized by either chevron anticlines and box synclines to the northwest or chevron synclines to the southeast. The former structural style displays narrow exposures for the cores of anticlines and wider exposures for the cores of synclines. Thrust detachments occur along Silurian (Fs) and Lower Cambrian (Fc) strata and are dominantly associated with the anticlines. To the southeast, this style of deformation passes gradually into one characterized by chevron synclines with associated principal detachment faults along Silurian (Fs), Cambrian (Fc) and Lower Sinian (Fz) strata. There are, however, numerous secondary back thrusts. Therefore, the thin-skinned belt is like the Valley and Ridge Province of the North American Applachian Mountains. The thick-skinned belt structurally overlies the thin-skinned belt and is characterized by a number of klippen including the Xuefeng and Wuling nappes. It is thus comparable to the Blue Ridge Province of Appalachia.The structural pattern of this thrust system in South China can be explained by a model involving detachment faulting along various stratigraphic layers at different stages of its evolution. The system was developed through a northwest stepwise progression of deformation with the earliest delamination along Lower Sinian strata (Fz). Analyses of balanced geological cross-sections yield about 18.1–21% (total 88 km) shortening for the thin-skinned unit and at least this amount of shortening for the thick-skinned unit. The compressional deformation from southeast to northwest during Late Jurassic to Cretaceous time occurred after the westward progressive collision of the Yangtze Block with the North China Block and suggests that the orogenic event was intracontinental in nature.     

宜兴抽水蓄能电站试验洞的反分析研究

结合江苏宜兴抽水蓄能电站地下厂房试验洞量测资料的分析,研究了成层各向异性岩体中洞室工程问题的反分析方法。采用分层均质模型进行反分析计算。计算区域的各层岩层均被分别视为均质各向同性体,初始地应力假设呈线性分布。有限元分析中,对倾斜成层的岩层、软弱夹层及断层节理等分别划分了单元,据以模拟成层岩体的各向异性特征。为使计算过程简化,对离洞室较远的岩层拟按地质资料对材料特性参数赋值,反分析计算的目标未知数为初始地应力和试验洞相邻围岩的弹性模量。结果表明,与工程实践符合较好。     

Theoretical Study on Stochastic Modeling of Combined Gravity-Magnetic-Electric-Seismic Inversion and Its Application

As gravity field,magnetic field,electric field and seismic wave field are all physical fields,their object function,reverse function and compound function are certainly infinite contiuously differentiable func-tions which can be expanded into Taylor (Fourier) series within domain of definition and be further reduced in-to solving stochastic distribution function of series and statistic inference of optimal approximation,This is the basis of combined gravity-magnetic-electric-seismic inversion built on the basis of separation of field and source gravity-magnetic difference-value(D-value)trend surface,taking distribution-independent fault sys-tem as its unit,depths of seismic and electric interfaces of interests as its corresponding bivariate compound re-verse function of gravity-magnetic anomalies and using high order polynomial(high order trigonometric func-tion)approximating to its series distribution,The difference from current dominant inversion techniques is that,first,it does not respectively create gravity-seismic,magnetic-seismic deterministic inversion model from theoretical model,but combines gravity-magnetic-electric-seismic stochastic inversion model from stochastic model;second,after the concept of equivalent geological body being introduced,using feature of independent variable of gravity-magnetic field functions,taking density and susceptibility related to gravity-magnetic func-tion as default parameters of model,the deterministic model is established owing to better solution to the con-tradictioc of difficulty in identifying strata and less test analytical data for density and susceptibility in newly explored area;third,under assumption of independent parent distribution,a real modeling by strata,the prob-lem of difficult plane closure arising in profile modeling is avoided,This technology has richer and more detailed fault and strata information than sparse pattern seismic data in newly explored area,successfully inverses and plots structural map of Indosinian discontinuty in Hefei basin with combined gravity-magnetic-electric-seismic inversion,With development of high precision gravity-magnetic and overall geophysical technology,it is certain for introducing new methods of stochastic modeling and computational intelligence and promoting the develop-ment of combined gravity-magnetic-electric-seismic inversion to open a new substantial and promoting the develop-ment of combined gravity-magnetic-electric-seismic inversion to open a new substantial path.