九龙江河口区表层水铀同位素的粒级分布

利用微滤和超滤技术研究了九龙江河口区表层水中铀及其同位素组成的粒级分布和地球化学行为.结果表明,溶解态(<0.4μm)中低分子量组分(<10 000 u)占主要份额,胶体态(10 000 u~0.4μm)238U所占比例不足1%,且随盐度的增加其所占份额逐渐降低.溶解态、低分子量组分和胶体态238U的比活度与盐度之间存在良好的线性正相关关系,证实它们在九龙江河口区呈现保守行为.在颗粒态(>0.4μm)中,各粒级组分238U所占份额主要受控于相应颗粒物的浓度,在盐度小于20的区域,各粒级颗粒组分238U占颗粒态的份额有如下变化次序:10~53μm>2~10μm>0.4~2μm>大于53μm,而在盐度大于30的近外海站位,该次序发生一些变化:0.4~2μm>10~53μm>2~10μm>大于53μm,最小粒级颗粒组分238U的贡献有所增加,反映了自生铀贡献的加强.九龙江河口区表层水中溶解态(包括低分子量组分和胶体态)的234U/238U)_A.R.均大于1,显示出234U过剩的特征,而各粒级颗粒组分中的234U/238U)_A.R.则接近于平衡值(1.0).这一现象与陆地岩石风化过程中水体对铀的淋滤释出量及234U的优先浸出有关.对232Th/238U质量比的研究显示,溶解态及其所包括的低分子量组分和胶体态的232Th/238U质量比均小于1,而颗粒态及其所包括的4个粒级组分中的232Th/238U质量比均大于1,反映了向外海输送过程中铀、钍地球化学行为的差异.     

A comparison of several wave spectra for the random wave diffraction by a semi-infinite breakwater

A comparison of the diffraction of multidirectional random waves using several selected wave spectrum models is presented in this paper. Six wave spectrum models, Bretschneider, Pierson–Moskowitz, ISSC, ITTC, Mitsuyasu, and JONSWAP spectrum, are considered. A discrete form for each of the given spectrum models is used to specify the incident wave conditions. Analytical solutions based on both the Fresnel integrals and polynomial approximations of the Fresnel integrals and numerical solutions of a boundary integral approach have been used to obtain the two-dimensional wave diffraction by a semi-infinite breakwater at uniform water depth. The diffraction of random waves is based on the cumulative superposition of linear diffraction solution. The results of predicted random wave diffraction for each of the given spectrum models are compared with those of the published physical model presented by Briggs et al. [1995. Wave diffraction around breakwater. Journal of Waterway, Port, Coastal and Ocean Engineering—ASCE 121(1), 23–35]. Reasonable agreement is obtained in all cases. The effect of the directional spreading function is also examined from the results of the random wave diffraction. Based on these comparisons, the present model for the analysis of various wave spectra is found to be an accurate and efficient tool for predicting the random wave field around a semi-infinite breakwater or inside a harbor of arbitrary geometry in practical applications.     

Methane-dominated thermochemical sulphate reduction in the Triassic Feixianguan Formation East Sichuan Basin, China: towards prediction of fatal H2S concentrations

New sour pools have recently found in the Lower Triassic Feixianguan Fm carbonate reservoirs in the East Sichuan Basin in China with H₂S up to 17.4% by volume. A recent blowout from a well drilled into this formation killed hundreds of people as a result of the percentage concentrations of H₂S. In order to assess the origin of fatal H₂S as well as the cause of petroleum alteration, H₂S concentrations and the isotopes, δ³⁴S and δ¹³C have been collected and measured in gas samples from reservoirs. Anhydrite, pyrite and elemental sulphur δ³⁴S values have been measured for comparison. The high concentrations of H₂S gas are found to occur at depths >3000 m (temperature now at 100 °C) in evaporated platform facies oolitic dolomite or limestone that contains anhydrite nodule occurrence within the reservoirs. Where H₂S concentrations are greater than 10% its δ³⁴S values lie between +12.0 and +13.2‰ CDT. This is within the range of anhydrite δ³⁴S values found within the Feixianguan Fm (+11.0 to +21.7‰; average 15.5±3.5‰ CDT). Thus H₂S must have been generated by thermochemical sulphate reduction (TSR) locally within the reservoirs. Burial history analysis and fluid inclusion data reveal that the temperature at which TSR occurred was greater than about 130–140 °C, suggesting that the present depth-temperature minimum is an artifact of post-TSR uplift. Both methane and ethane were actively involved in TSR since the petroleum became almost totally dry (no alkanes except methane) and methane δ¹³C values become significantly heavier as TSR proceeded. Methane δ¹³C difference thus reflects the extent of TSR. While it is tempting to use a present-day depth control (>3000 m) to predict the distribution of H₂S in the Feixianguan Fm, this is an invalid approach since TSR occurred when the formation was buried some 1000–2000 m deeper than it is at present. The likelihood of differential uplift across the basin means that it is important to develop a basinal understanding of the thermal history of the Feixianguan Fm so that it is possible to determine which parts of the basin have been hotter than 130–140 °C.     

虾蟹海产品香味的前体物质的加热变化

本文研究了虾蟹海产品香味的前体物质在加热前后的变化。实验结果表明：对虾和蟹肌肉中的糖原和不饱和脂肪酸在加热前后含量下降，糖原是Ｍａｉｌｌａｒｄ反应的基础物质．不饱和脂肪酸是虾蟹肌肉香味中羰基化合物的前体物质。虾蟹肌肉中主要积累的核苷酸成分ＡＭＰ在加热后减少，而肌肉提取物中的游离氨基酸和结合氨基酸，特别是疏水氨基酸含量均增加。     

可编程序控制器的多机联用

多台可编程序控制器通过输入、输出点的直接连接,传递命令、状态和数据,实现多机联用系统。     

环胶州湾公路海上段汽车尾气的环境影响

对类比路段进行连续模拟试验,进行现场调查,给出汽车尾气主要污染物的排污强度,预测了汽车尾气中CO、C_nH_m和NO_x的扩散范围。     

Refraction-Diffraction Mathematical Model for Waves With Lateral Energy Transmission Mechanism and Its Verification

To solve problems concerning wave elements and wave propagation, an effective way is the wave energy balance equation, which is widely applied in oceanography and ocean dynamics for its simple computation. The present papaer advances wave energy balance equations considering lateral energy transmission and energy loss as the governing equation for the study of wave refraction-diffraction. For the mathematical model, numerical simulation is made by means of difference method, and the result is verified with two examples.     

流形上的空间密度聚类算法研究

研究流形上的聚类分析，针对基于密度的空间聚类引入了流形概念，提出1种基于流形的密度聚类算法，该方法将流形的概念与聚类相结合，可以适用于样本为复杂分布的聚类。文中通过实例证明此算法的有效性。     

水槽造流系统水力计算与泵机选择

提供一种完整的用于试验水槽造流系统的水力计算和泵机选择方法 ,可用于其他类似工程设计。     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.