云南省白竹箐-阳文山NE向构造带铅锌矿成矿地质条件及找矿方向

重点分析构造带的成矿地质条件，总结地层、构造、岩浆岩与矿床的关系，认为该地区具有寻找层控及热液改造型铅锌矿的远景，并指明找矿方向，根据化探异常及矿点分布的规律，圈定了找矿靶区。     

Discovery of Pyrrhotite-Chalcopyrite-Bearing Amphibole Megacrysts in Tongling Area, Anhui Province

Some pyrrhotite-chalcopyrite-bearing amphibole megacrysts (including pyroxene megacrysts) were discovered in Mesozoic augite diorite-porphyrite at Caoshan in Tongling area, Anhui Province. The amphibole megacrysts, belonging mainly to pargasite and magnesiohastingsite, are characteristic of the amphibole composition derived from mantle and crystallized in lower crust. In general, the aggregates of pyrrhotite-chalcopyrite take the shapes of cylinder and sphere. Three occurrences have been recognized in the amphibole megacrysts: parallel linear, bunchy and scattered. The unique cylinder-like shape of the aggregates and remarkable Ni-poor sulfides in Caoshan are distinctively different from the spherical Ni-rich sulfides in pyroxene megacrysts and any other kinds of megacrysts. In terms of composition, the amphibole megacrysts and their sulfides in Caoshan are similar to those in the pyroxenite xenoliths in Qilin, Guangdong Province. In terms of origin, the pyrrhotite-chalcopyrites as exsolution products resulted from the subsolidus re-equilibration of sulfide solid solution within amphibole megacrysts.amphibole megacrysts were first discovered inside and outside China. This discovery is important for the study of regional magma evolution and its associated mineralizations and ore sources as well.     

The Upper Permian Sedimentary Facies and Its Role in the Dajing Cu-Sn Deposit, Linxi County, Inner Mongolia, China

Abstract: Exhaustive investigations were launched for confirming the upper Permian host rocks of the Dajing Cu-Sn Deposit, probing into the possibility that Dajing is a Sedex type deposit during cosedimentation, complementing the deficiency of previous researches and going further into substantiating the role of the upper Permian strata in the control of ore distribution. After more than two years work, we reclassified the sedimentary facies in the Dajing area and its periphery as shallow fresh water lake and delta. Indicative sedimentary structures, such as ripple marks, rain marks, and mud cracks combined with contemporary fossils, were revealed. Having measured the flow directions, performed chemical comparison, and analyzed various sediments from sourceland in the Dajing area by XRF, we consequently redivided the strata into four sedimentary members, among which P₂l₁ and P₂l₂ were concluded as significant ore-hosted strata. The upper Permian basin was a lateral rift basin. The water and sediments in the basin are much deeper and thicker in the north than those in the south.
The indicators of special sedimentary facies, such as gravity flow, brine pool and synchronogenic stratiform structure of the ore cannot be found in the Dajing area. There was no growth fault, assemblage of sulfide and sulfate, and no zonation as well.
On the basis of study in this area, taking into account the paleosedimentary environment as capriciously flowing shallow lake, which approximated the state of oxidation, we figured that the paleogeography made it prohibitively difficult to form stratiform sulfide deposits which are prone to form in deoxidized environment. It can be ruled out the possibility that the Dajing deposit is a syngenetic deposit during sedimentation.     

川西前陆盆地天然气成藏过程

川西前陆盆地具有丰富的天然气资源,发育上三叠统巨厚的煤系烃源岩,以生气为主,并发育多套储盖组合。天然气成因类型主要是煤成气,目前的气田分布主要受古隆起、沟通下部烃源岩和上部储集层的隐伏断层以及储集条件的控制。川西前陆盆地具有多期成藏、燕山期或喜山期聚集、喜山期调整等特点。来自上三叠统煤系源岩的天然气聚集主要在燕山期,形成原生气藏或下生上储型气藏;后经过喜山期的逆冲作用,对浅层储集层进行改造,产生的断裂沟通深部气藏与浅层圈闭,在对深层(主要在上三叠统)原生气藏进行改造的同时形成浅层(侏罗系)次生气藏。     

煤与瓦斯突出预报的理想灰贴近函数聚类关联分析

从预报煤与瓦斯突出所获取的数据信息知，其信息多数为灰色特征。为突出其灰色特性，本文采用理想灰贴近函数聚类关联分析预测预报煤与瓦斯突出的危险程度，并将此方法同模糊聚类预测预报法和模糊聚类关联分析预报法及模糊聚类相似分析预报法进行了对比分析。由对比分析可知，采用4种数学方法预测预报煤与瓦斯是否突出，给出的结论是一致的，只是预测预报是否发生的可能程度略有差别。其中关联分析比相似分析计算过程较简单，且相似分析在确定编号时，有时受截值λ取值影响。尽管如此，但不影响预测预报结果。所以，不论是采用模糊聚类，还是灰色聚类数学方法预报煤与瓦斯突出均是可行的，可在实践中应用。     

Geological Controls on the CBM Productivity of No.15 Coal Seam of Carboniferous–Permian Taiyuan Formation in Southern Qinshui Basin and Prediction for CBM High-yield Potential Regions

Coalbed methane (CBM) resources in No.15 coal seam of Taiyuan Formation account for 55% of the total CBM resources in southern Qinshui Basin (SQB), and have a great production potential. This study aims at investigating the CBM production in No.15 coal seam and its influence factors. Based on a series of laboratory experiments and latest exploration and development data from local coal mines and CBM companies, the spatial characteristics of gas production of No.15 coal seam were analyzed and then the influences of seven factors on the gas productivity of this coal seam were discussed, including coal thickness, burial depth, gas content, ratio of critical desorption pressure to original coal reservoir pressure (RCPOP), porosity, permeability, and hydrogeological condition. The influences of hydrological condition on CBM production were analyzed based on the discussions of four aspects: hydrogeochemistry, roof lithology and its distribution, hydrodynamic field of groundwater, and recharge rate of groundwater. Finally, a three-level analytic hierarchy process (AHP) evaluation model was proposed for predicting the CBM potentials of the No.15 coal seam in the SQB. The best prospective target area for CBM production of the No.15 coal seam is predicted to be in the districts of Panzhuang, Chengzhuang and south of Hudi.     

Development Phases and Mechanisms of Tectonic Fractures in the Longmaxi Formation Shale of the Dingshan Area in Southeast Sichuan Basin, China

Shale gas has currently attracted much attention during oil and gas exploration and development. Fractures in shale have an important influence on the enrichment and preservation of shale gas. This work studied the developmental period and formation mechanism of tectonic fractures in the Longmaxi Formation shale in the Dingshan area of ??southeastern Sichuan Basin based on extensive observations of outcrops and cores, rock acoustic emission (Kaiser) experiments, homogenization temperature of fracture fill inclusions, apatite fission track, thermal burial history. The research shows that the fracture types of the Longmaxi Formation include tectonic fractures, diagenetic fractures and horizontal slip fractures. The main types are tectonic high-angle shear and horizontal slip fractures, with small openings, large spacing, low densities, and high degrees of filling. Six dominant directions of the fractures after correction by plane included NWW, nearly SN, NNW, NEE, nearly EW and NW. The analysis of field fracture stage and fracture system of the borehole suggests that the fractures in the Longmaxi Formation could be paired with two sets of plane X-shaped conjugate shear fractures, i.e., profile X-shaped conjugate shear fractures and extension fractures. The combination of qualitative geological analysis and quantitative experimental testing techniques indicates that the tectonic fractures in the Longmaxi Formation have undergone three periods of tectonic movement, namely mid-late Yanshanian movement (82–71.1 Ma), late Yanshanian and middle Himalaya movements (71.1–22.3 Ma), and the late Himalayan movement (22.3–0 Ma). The middle-late period of the Yanshanian movement and end of the Yanshanian movement-middle period of the Himalayan movement were the main fracture-forming periods. The fractures were mostly filled with minerals, such as calcite and siliceous. The homogenization temperature of fracture fill inclusions was high, and the paleo-stress value was large; the tectonic movement from the late to present period was mainly a slight transformation and superposition of existing fractures and tectonic systems. Based on the principle of tectonic analysis and theory of geomechanics, we clarified the mechanism of the fractures in the Longmaxi Formation, and established the genetic model of the Longmaxi Formation. The research on the qualitative and quantitative techniques of the fracture-phase study could be effectively used to analyze the causes of the marine shale gas fractures in the Sichuan Basin. The research findings and results provide important references and technical support for further exploration and development of marine shale gas in South China.     

徐家围子断陷深层火石岭组致密火山岩储层地应力分布规律研究

徐家围子断陷位于松辽盆地北部,其深层中生代火石岭组为致密火山岩气藏,天然裂缝发育,地应力分布非均质性强。结合诱导裂缝法与井径崩落法进行单井现今地应力方向分析,利用声波测井法计算现今地应力大小的纵向分布。依据火石岭组构造顶底面图、火山岩相组及断层分布特征建立非均质三维地质模型;在动、静态岩石物理参数拟合校正的基础上,结合实验测试及已有研究成果,确定不同岩相组和断层岩石物理参数,建立三维力学模型;利用Ansys有限元数值模拟软件建立火石岭组三维数学模型并进行相关运算获得三维现今地应力分布模型。计算结果表明在火石岭组地层中,水平最大主应力方向主要为东西向,应力值范围在86~110 MPa;水平最小主应力方向主要为南北向,应力值范围在67~84 MPa。分析模拟结果可知火山岩相、断层和构造起伏三者对火石岭组现今地应力分布影响较大。其中水平主应力的方向主要受断层和近火山口相分布的影响,而水平主应力的大小则是受三者综合作用。在构造低部位,近火山口相组发育处,断层上盘及断层端部皆为主应力的集中区域。依据现今地应力研究成果可为徐家围子断陷下一步开发井网部署、压裂改造方案和水平井的设计以及注水管理提供重要指导。      

新疆西昆仑塔什库尔干高压变质岩的重新厘定及其构造意义

新疆西昆仑塔什库尔干以东解体出一套“斜长角闪片麻岩-矽线石榴黑云斜长片麻岩组合”。岩石地球化学特征表明,斜长角闪片麻岩原岩为基性火山岩,具有岛弧玄武岩的特征,在构造环境判别图中（TiO2/10-MnO-P2O5、Zr-TiO2、Hf/3-Th-Nb/16）,样品均落入岛弧环境;矽线石榴黑云斜长片麻岩原岩为过铝质碎屑岩,构造环境判别图（K2O/Na2O-SiO2、La-Th-Sc、Th-Sc-Zr/10）显示,其形成环境为活动大陆边缘的岛弧环境;LA-ICP-MS锆石同位素年代学表明,斜长角闪片麻岩形成于早寒武世,并经历了志留纪、二叠纪、白垩纪、中新世4期岩浆热事件。该区高压变质岩的重新厘定对于探讨西昆仑的构造演化具有重要意义。     

冰川/积雪-大气相互作用研究进展

冰川和积雪是冰冻圈的重要组成部分,在全球或区域气候系统中起着极其重要的作用.开展冰川/积雪-大气相互作用研究,是研究冰冻圈物理过程及其对气候系统反馈作用的必然需求,也是研究冰川/积雪对气候变化响应的有效手段,同时还可为全球(区域)气候和水文模式提供冰川/积雪面的地表特征参数.近一个世纪以来,在冰川/积雪面辐射特征、能量通量计算方法和平衡特征等方面开展了许多观测试验和理论研究,并取得了卓有成效的研究结果.但是在准确获取辐射通量、研发普适性较强的反照率参数化方案、复杂地形条件下能量通量的计算,以及发展分布式能量平衡模式等方面尚存在许多不确定性,仍面临许多技术难点,也是未来的研究重点.