海洋产业结构与海域承载力的匹配关系探讨——以辽宁省为例

海洋产业结构和海域承载力之间存在多种耦合匹配关系,其匹配程度是影响海洋经济健康持续发展的重要因素,而准确地定量化评价这种匹配关系是准确把握海洋产业结构是否失衡的关键环节。文章将海域承载力引入海洋产业结构问题研究中,首先对海洋产业结构水平和海域承载力定量化测算,在此基础上运用基于数列的匹配度计算方法测度辽宁省海域承载状况与海洋产业结构水平的匹配度,探讨海洋产业结构与海域承载力之间的匹配关系。结果表明:辽宁省海域承载力与海洋产业结构水平匹配度数值较高,二者之间存在较匹配的关系。     

黄海浒苔绿潮防控对策研究

绿潮是一种全球性海洋生态灾害,在法国、美国、日本等均有发生。文章综述我国黄海浒苔绿潮发生情况,呈规模大、持续时间长、危害大等特点,已威胁渔业、养殖业和旅游业的发展,对沿海经济社会造成不利影响;提出成立联防联控工作组、建立区域联防联控机制、加大科技支撑与保障力度、健全多元投入机制和加强公众宣传教育等浒苔绿潮防控措施。     

崇明岛东滩湿地芦苇光合作用对土壤水盐因子的响应

2015年3~10月,在崇明岛东滩湿地设置7块采样地,以不同水盐条件下生长的芦苇(Phragmites australis)为材料,应用便携式光合系统分析仪(Li-6400),对芦苇的光响应特征进行实地测定,探讨芦苇光合过程对干旱和盐胁迫的响应机理。结果表明:1各月采样日的水位与土壤电导率显著负相关(n=420,p0.01),适当增加土壤水位,有利于降低土壤电导率,从而缓解植物盐胁迫伤害;28月21日的芦苇叶片净光合速率、蒸腾速率和气孔导度与水位显著正相关(n=42,p0.01),而与土壤电导率显著负相关(n=42,p0.01);胞间CO2浓度与水位和土壤电导率不相关。当水位高于-50 cm,净光合速率随着水位下降而降低,非气孔因素可能是净光合速率下降的主要原因;当水位低于-50 cm时,土壤电导率高于10 m S/cm,叶片蒸腾速率快速降低,水分利用效率不断提高,芦苇叶片以较低的净光合速率来适应干旱胁迫和盐胁迫;芦苇叶片通过降低最大净光合速率、暗呼吸速率、光补偿点和光饱和点等光合生理特征来适应干旱胁迫和盐胁迫;芦苇叶片净光合速率和最大净光合速率对土壤水盐因子具有高度相关性,可以作为土壤水盐胁迫程度的反应指标。因此,在芦苇快速生长阶段,合理调控水位,对芦苇光合作用具有重要意义。     

Testing and modeling of the mechanical behavior of dolomite in the Wudongde hydropower plant

In order to understand the mechanical behaviours of the surrounding rocks in the underground caverns of the Wudongde hydropower plant, triaxial tests are performed on a type of dolomite. It is revealed that damage induced by crack development is the main factor controlling the nonlinear plastic deformation and failure behaviour of the dolomite in both pre- and post-peak regimes. Based on this understanding, a coupled elastoplastic damage model is developed for capturing the dolomite’s mechanical behaviours. In the model, the effects of plasticity and damage on rocks is described by introducing plastic hardening and damage softening commonly in the plastic yield surface. Which are both derived from a suitable Helmholtz free energy function. The model is used to simulate the triaxial tests. Comparisons between test results and the numerical modelling show that the developed model is capable of describing the macro mechanical behaviours of the Wudongde dolomite.     

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.     

基于近岸GPS RTK技术的潮位和波浪提取算法研究

由于潮汐和波浪的周期相差甚远,对实时海面高程数据进行相应的低通和带通滤波即可提取潮位和波浪信息。通过对仿真的实时海面高程数据进行平滑滤波、中值滤波、小波滤波等低通滤波,以及椭圆、巴特沃斯等带通滤波结果分析表明:近岸GPS RTK技术可用于潮位和波浪同步测量;对于潮位信息的提取方面,平滑、中值、小波等低通滤波均能很好的提取出潮位信息,其中平滑滤波最佳,且工程中易于实现;对于波浪信息的提取方面,椭圆滤波、巴特沃斯、切比雪夫Ⅰ型等带通滤波均能很好提取出波浪信息。     

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.     

容县压实花岗岩残积土的力学性质与微结构特性研究

选取广西容县花岗岩残积土为研究对象,取击实曲线上3个不同含水率对应的压实样（最佳含水率及干侧、湿侧,后两者对应的干密度相同）分别进行了直剪试验、扫描电镜观测（SEM）和压汞试验（MIP）,并从微观特征解释其力学性能的差异。结果表明:（1）花岗岩残积土在3种压实状态下具有相同应力-应变曲线形状,无明显峰值,抗剪强度在最佳状态时的最高,湿侧状态抗剪强度与干侧状态相近,3种状态下内摩擦角值差别较小,但黏聚力在最佳状态时最大,干侧和湿侧状态较最佳状态分别下降66.4%和43.1%;（2）花岗岩残积土在湿侧状态下普遍形成团聚体,团聚体之间呈架空结构,累积孔隙体积最大,为明显的双峰分布孔隙特征;在最佳状态下组构最密,高岭石片定向性排列;在干侧状态下高岭石片呈片架结构,累积孔隙体积最小;随着含水率的降低,土样双峰孔隙特征逐渐变得不明显;（3）花岗岩残积土在不同状态时的微观特性较好地解释其力学性质的差异。     

美国声波钻进规程ASTM D6914/D6914M—16浅析

声波钻进技术具有速度快、岩心保真好、适用地层广等优点,广泛应用于工程勘察、环境调查、浅源地热、基础工程、矿山治理等领域。为了提高声波钻进施工质量和过程控制,美国材料与实验协会于2004年制定了第一部声波钻进规程D6914—04,后经多次修订完善,形成最新声波钻进规程D6914/D6914M—16。本文根据该版规程内容,从技术原理、钻进设备、成孔工艺等方面展开了阐述。当振动器与钻柱谐振频率重叠时,声波钻头受到的能量达到峰值。钻机和取心钻具是声波钻进的核心设备。成孔工艺主要以双管高频振动、低速回转为主,实现多种目的层的原位取心作业。标准相关内容对声波钻进技术在我国的持续推广具有参考意义。