辽东湾坳陷东部地区走滑双重构造的发育特征 及其石油地质意义

在将构造发育特征与走滑双重构造理论模型进行类比分析的基础上,对辽东湾坳陷东部地区的走滑双重构造的发育特征进行了研究,并结合油气勘探实践成果,就其石油地质意义进行了探讨,研究结果表明:在受控于走滑与拉伸并存的多动力源区域地质背景下,辽东湾坳陷新生代构造演化体现了断陷与拗陷、拉张与走滑的叠加效应,NNE走向的辽中1号断裂、辽中2号断裂及辽东断裂的发育不仅控制了辽东湾坳陷东部地区的凸凹格局,其走滑侧接关系也导致了研究区走滑双重构造的发育;辽东凸起是由于辽中2号断裂、辽东断裂走滑弯曲、右行左阶侧接而形成的挤压走滑双重构造,而辽中凹陷在早期拉张断陷基础上,经历了后期走滑作用的改造,其断裂体系的发育体现了辽中1号断裂与辽中2号断裂的右旋右行侧列所产生的拉张走滑双重构造效应;在走滑双重构造的增压带,断裂侧向封堵性强,有利于形成有效的断层圈闭,是油气藏发育的有利区带。     

青藏高原拉萨地块西部念青唐古拉岩群的地球化学特征及构造意义

拉萨地块西部呈断块状沿狮泉河-申扎-嘉黎蛇绿混杂岩带附近分布的念青唐古拉岩群被认为是前寒武纪变质基底。本文对念青唐古拉岩群进行了系统的岩石学、地球化学、同位素年代学及构造地质学研究。研究结果表明片岩-片麻岩-变粒岩含十字石、石榴子石等特征变质矿物,遵循粒度分异规律,其原岩可能为来自冈瓦纳古陆核北缘中新元古代弧盆体系的活动大陆边缘浊积岩。斜长角闪岩具低硅、高铁镁、富钙的基性岩特征,其原岩为岛弧型基性火山岩。念青唐古拉岩群中的花岗伟晶岩锆石LA-ICPMS U-Pb年龄为1150±13Ma,具过铝质S型花岗岩地球化学特征,可能为中元古代(1150±13 Ma)以前就开始沉积的念青唐古拉岩群基底岩石通过部分熔融形成。与花岗伟晶岩渐变过渡接触的二云斜长片麻岩第一组变质重结晶锆石U-Pb年龄为701±15 Ma,结合十字石特征变质矿物,暗示了该地区中温高压变质作用的峰期变质,变质程度达角闪岩相;第二组热液流体锆石UPb年龄为301±8.4 Ma,可能与冈瓦纳大陆北缘古特提斯洋演化过程中的岩浆热液作用有关。     

北斗三频伪距相关随机模型单站建模方法

为了提供可靠的伪距随机模型,基于3个线性无关的北斗三频伪距/载波无几何无电离层(GIF)组合,研究了一种利用单站数据估计北斗三频伪距相关随机模型算法。该算法首先利用低阶多项式对GIF组合进行拟合,以尽可能消除非伪距噪声以外的其他常数和误差,然后利用多元线性回归分析实现对3个线性无关的GIF组合随机噪声同时建模,最后再由线性组合关系变换得到原始北斗三频伪距相关随机模型。经北斗三频实测数据验证结果表明,该算法可实现北斗非差三频伪距相关随机模型的单站解算,有利于为导航定位以及完好性监测提供精准随机模型。     

济阳坳陷古近系泥页岩成因相划分

系统岩心观察和高密度薄片鉴定等分析测试资料研究结果显示,济阳坳陷沙三下-沙四上泥页岩成分组成及构造类型主要受沉积作用控制,岩石结构特征主要受成岩作用控制。根据泥页岩中方解石成因及重结晶程度,结合岩石成分及构造特征,将济阳坳陷沙三下-沙四上泥页岩划分为沉积主控型、沉积-成岩双控型及成岩主控型三大成因相。沉积主控型分布最为广泛,岩相类型多样,构造特征反映成因环境;沉积-成岩双控型主要见于纹层状岩相,由泥质纹层与显晶粒状方解石纹层互层构成;成岩主控型以柱状、柱纤状方解石垂直层面呈脉状、透镜状产出为特征。成岩主控型和沉积-成岩双控型泥页岩与页岩油气关系密切,是重要的有利成因相类型。     

Characteristics of deuterium excess parameters for geothermal water in Beijing

This study investigates the characteristics of geothermal water in 10 geothermal fields in Beijing. The relationships between the deuterium excess parameter (d) and temperature, depth, age of geothermal groundwater, groundwater flow field, and Eh were investigated using geothermal groundwater samples. Results showed that (1) the average d value of geothermal water is 5.4, whereas that of the groundwater in normal temperature is 6.04. The differences are induced by the oxygen isotope exchange during the water–rock interaction, which may be more easily completed in geothermal water than in cold groundwater. (2) The d value increases remarkably with the age of the geothermal groundwater. The d value increases from 11.2 to 14.6 when the age of the geothermal water is 12,760 ± 130 a and 38,960 ± 630 a, respectively. Moreover, the isotope heat exchange for composition of the hydrogen and oxygen isotopes in the geothermal groundwater proceeds sufficiently with time. (3) The d value decreases from 5.72 to 3.03 when the depth increases from 125.13 to 3221 m. Generally, in the same area, the d value decreases with depth because the temperature is increasing. (4) The d value of the groundwater gradually reduces from the northern recharge area to the southern discharge area. The average d value is 7.31 in the northern recharge area and 5.68 in the middle Beijing Depression, whereas the d value in the southern area of Fengheying is ?9.20. The larger difference in d values between the recharge and discharge areas is due to the slower velocity of underwater flow, which induces longer time for oxygen exchange. (5) The relationship between the d and Eh is complex. When Eh is <200 mV, the d value of the geothermal water decreases with the decrease in Eh. When Eh is higher than 200 mV, the d value increases slightly with the decrease in Eh. The study of the characteristics of deuterium excess parameters for geothermal water could provide a scientific isotopic evidence for assessment and exploitation measures in geothermal groundwater systems.     

Relationships among volcanic and hydrothermal activity and faults from the Shunnan 3-D well zone in the Tadong Area (Tarim Basin,China)

Tarim Basin distributed widely two stages of Permian volcanic rocks. However, the location and timing of these rocks pinching out and the relationship between Ordovician carbonate hydrothermal reservoirs and fault activity remain unclear. The Shunnan (Shunnan here in after referred to as SN) 1 3-D well zone in the eastern Tarim Basin contains volcanic rocks, and the Ordovician layer contains a hydrothermal reservoir. This paper describes the lithology, stage, volcanic rock distribution, crater position and deposition pinch-out line of volcanic rocks based on drilling and 3-D seismic data. The Permian strata in the well zone contain only one stage of Kupkuciman Formation basalt and tuff, the Kaipeleicike Formation contains terrigenous clastic rock and the adjacent volcanic rocks of wells SN2 and GL (Gulong here in after referred to as GL) 2 exhibit an absence of deposition. Although the craters are distributed on both sides of the NNW faults that cross well SN4, their positions are also controlled by the intersection of earlier NEE and NW faults and later NNE faults. Furthermore, the Ordovician strata in the SN1 well zone developed abundant tubular high-amplitude anomalies and tabular high-amplitude anomalies via hydrothermal corrosion, and the anomaly distributions are similar to the positions of the craters, which are controlled by the intersection of multi-group faults and the density of the faults.     

Effects of size and strain rate on the mechanical behaviors of rock specimens under uniaxial compression

Size and strain rate are two key factors that dramatically influence the estimation of rock mechanical behaviors. To better understand the effects of size and strain rate on measured rocks, rock specimens with six different sizes were tested at six different strain rates under uniaxial compression using the MTS 815 Rock Mechanics Test System. Having determined that the size and strain rate significantly affect the peak strain, peak stress, elastic modulus, acoustic emission (AE), and failure pattern of the rock specimens, the relation was established between the strength and the size and strain rate of red sandstone. And the variation was revealed among the size and strain rate, the AE, and the failure pattern. It turned out that the peak stress was negatively correlated with the rock size and was positively correlated with the strain rate. When the length to diameter ratio (L/D) of the rock specimen was less than 2.0, the AE appeared mildly. The AE quantities gradually increased before the peak stress, and then sharply decreased after the peak stress. The failure pattern of the rock specimen was relatively complicated, with a fracture plane appearing along the axial direction. Conical failure type was also presented. When the L/D ratio of the specimen was greater than 2.0, the AE characteristics of red sandstone showed the radical model. There were relatively few AE rings before the peak stress. But the AE rings increased suddenly and dramatically during the peak stress. The rock specimens primarily failed with a single shear plane. Moreover, with an increase in the strain rate, the AE activities were enhanced and the AE quantities increased. When the strain rate of the rock specimen was less than 5.0?×?10^?4/s, the rock specimen failed with a shear or tensile-shear pattern. And when the strain rate was greater than 5.0?×?10^?4/s, the rock specimen tended to fail in a conical pattern.