Improvement of saponification extraction method for fatty acids separation from geological samples

The conventional saponification method could result in lower recoveries and artificial changes of long-chain fatty acids. The main reason is the error judgment of the intermediate layer suspended between the aqueous and organic layer during the liquid–liquid extraction process. This study shows that the intermediate layer consists of lots of medium- to long-chain carboxylic salts for their special physical and chemical properties. An improved saponification extraction method is also developed and the results show that the carboxylic salts distributed in the intermediate layer could be obtained completely, which greatly enhances the authenticity and accuracy of fatty acid analysis. Additionally, the possible reasons of formation of the intermediate layer are also discussed.     

An optimized sequential extraction scheme for molybdenum association in environmental samples

By comparing three sequential extraction procedures, a new optimized extraction scheme for the molybdenum association in environmental samples was proposed. Five operational steps were described as exchangeable (KH₂PO₄ + K₂HPO₄: including water-soluble), associated with organic matter (NaOH), Fe–Mn oxides and/or carbonates (HCl), sulfides (H₂O₂) and residue (HNO₃ + HF + H₂O₂). An optimized extraction scheme was compared with Tessier’s procedure and the Commission of European Communities Bureau of Reference (BCR) was applied to black shales. Results showed Tessier’s procedure gave the lowest concentration values for exchangeable molybdenum and the highest values for the residual molybdenum, which could not present the efficiency of the extraction reagents. BCR’s procedure showed the highest values in oxidizable molybdenum and presented four fractions of molybdenum, which did not demonstrate the fractions of molybdenum in the black shales in detail. The optimized extraction scheme demonstrated a certain improvement on extraction efficiency over Tessier’s procedure for the lowest residual molybdenum, and revealed more featured fraction information of molybdenum in black shales than BCR’s. Therefore, after a comparison with other two extraction procedures, the optimized extraction scheme proved suitable for the molybdenum in black shales and it also showed an accurate determination of the molybdenum in the fractions and source of bioavailable Mo.     

Ra’s Abdah of the north Eastern Desert of Egypt: the role of granitic dykes in the formation of radioactive mineralization,evidenced by zircon morphology and chemistry

Syenogranitic dykes in the north of Egypt’s Eastern Desert are of geological and economic interest because of the presence of magmatic and supergene enrichment of radioactive mineralization. Zircon crystal morphology within the syenogranitic dykes allows precise definition of sub-alkaline series granites and crystallized at mean temperature of about 637 °C. The growth pattern of the zircons suggest magmatic and hydrothermal origins of radioactive mineralization. Hydrothermal processes are responsible for the formation of significant zircon overgrowth; high U-zircon margins might have occurred contemporaneously with the emplacement of syenogranitic dykes which show anomalous uranium (eU) and thorium (eTh) contents of up to 1386 and 7330 ppm, respectively. Zircon chemistry revealed a relative increase of Hf consistent with decreasing Zr content, suggesting the replacement of Zr by Hf during hydrothermal activity. Visible uranium mineralization is present and recognized by the presence of uranophane and autunite.     

Geochemistry of sedimentary rocks from Permian–Triassic boundary sections of Tethys Himalaya: implications for paleo-weathering,provenance, and tectonic setting

The geochemical characteristics of two sections—the Permian–Triassic boundary (PTB) Guryul Ravine section, Kashmir Valley, Jammu and Kashmir, India; and the Attargoo section, Spiti Valley, Himachal Pradesh, India—have been studied in the context of provenance, paleo-weathering, and plate tectonic setting. These sections represent the siliciclastic sedimentary sequence from the Tethys Himalaya. The PTB siliciclastic sedimentary sequence in these regions primarily consists of sandstones and shales with variable thickness. Present studied sandstones and shales of both sections had chemical index of alteration values between 65 and 74; such values reveal low-to-moderate degree of chemical weathering. The chemical index of weathering in studied samples ranged from 71 to 94, suggesting a minor K-metasomatism effect on these samples. Plagioclase index of alteration in studied sections ranged from 68 to 92, indicating a moderate degree of weathering of plagioclase feldspars. The provenance discriminant function diagram suggests that the detritus involved in the formation of present studied siliciclastic sedimentary rocks fall in quartzose sedimentary and felsic igneous provenances. These sediments were deposited in a passive continental margin plate tectonic setting according to their location on a Si₂O versus K₂O/Na₂O tectonic setting diagram.     

Nuclear field shift effects on stable isotope fractionation: a review

An anomalous isotope effect exists in many heavy element isotope systems (e.g., Sr, Gd, Zn, U). This effect used to be called the “odd–even isotope effect” because the odd mass number isotopes behave differently from the even mass number isotopes. This mass-independent isotope fractionation driving force, which originates from the difference in the ground-state electronic energies caused by differences in nuclear size and shape, is currently denoted as the nuclear field shift effect (NFSE). It is found that the NFSE can drive isotope fractionation of some heavy elements (e.g., Hg, Tl, U) to an astonishing degree, far more than the magnitude caused by the conventional mass-dependent effect (MDE). For light elements, the MDE is the dominant factor in isotope fractionation, while the NFSE is neglectable. Furthermore, the MDE and the NFSE both decrease as temperatures increase, though at different rates. The MDE decreases rapidly with a factor of 1/T², while the NFSE decreases slowly with a factor of 1/T. As a result, even at high temperatures, the NFSE is still significant for many heavy element isotope systems. In this review paper, we begin with an introduction of the basic concept of the NSFE, including its history and recent progress, and follow with the potential implications of the inclusion of the NFSE into the kinetic isotope fractionation effect (KIE) and heavy isotope geochronology.     

Internal Microanatomy and Zoological Affinity of the Early Cambrian Olivooides

The early Cambrian pentamerous microfossil Olivooides/Punctatus in South China, which is characterized by a diagnostic stellate tubular apex, has been well-known for its almost complete development sequence that can be confidently traced from embryos and hatched juveniles, to conical adults. However, its zoological affinity remains highly controversial. Here we describe the internal microanatomic structures of the soft-body inside the peridermal theca of Olivooides multisulcatus Qian, 1977, including interradial pairs of tentacles, adradial and perradial frenula, perradial oral marginal lappets and twins of perradial gastric saccule-like humps as well as a circular velarium with striated coronal muscles. Particularly, one specimen shows bifurcated velarial canals along the bell aperture. Both the components of the soft-body and the external theca (or cyst) are arranged in perfect pentaradial symmetry. These characteristics are more compatible with those of living cubomedusans and co-occurring Cambrian athecate embryonic cubozoans. Concerning the presence of peridermal theca, Olivooides most likely represents an extinct thecate stem-group cubomedusae but devoid of both perradial eyes and specialized pedalia. The well-grown soft body inside the peridermal tube displays a set of mixed features of both polyp and medusa.     

Fractionation characteristics of rare earth elements (REEs) linked with secondary Fe,Mn, and Al minerals in soils

Soil secondary minerals are important scavengers of rare earth elements (REEs) in soils and thus affect geochemical behavior and occurrence of REEs. The fractionation of REEs is a common geochemical phenomenon in soils but has received little attention, especially fractionation induced by secondary minerals. In this study, REEs (La to Lu and Y) associated with soil-abundant secondary minerals Fe-, Al-, and Mn-oxides in 196 soil samples were investigated to explore the fractionation and anomalies of REEs related to the minerals. The results show right-inclined chondrite-normalized REE patterns for La–Lu in soils subjected to total soil digestion and partial soil extraction. Light REEs (LREEs) enrichment features were negatively correlated with a Eu anomaly and positively correlated with a Ce anomaly. The fractionation between LREEs and heavy REEs (HREEs) was attributed to the high adsorption affinity of LREEs to secondary minerals and the preferred activation/leaching of HREEs. The substantial fractions of REEs in soils extracted by oxalate and Dithionite-Citrate-Bicarbonate buffer solutions were labile (10 %–30 %), which were similar to the mass fraction of Fe (10 %–20 %). Furthermore, Eu was found to be more mobile than the other REEs in the soils, whereas Ce was less mobile. These results add to our understanding of the distribution and geochemical behavior of REEs in soils, and also help to deduce the conditions of soil formation from REE fractionation.     

Study on the Global Carbon Assimilation System Based on Multisource Remote Sensing Data

The Paris agreement signed in April, 2016 aims to balance global anthropogenic carbon emissions and terrestrial carbon sinks by the middle of the 21^st century. To fulfill this goal, it is necessary to calculate carbon fluxes of different regions reliably. The global carbon assimilation system is an effective technique for achieving this goal. The Ministry of Science and Technology of China supports the project entitled as study on the global carbon assimilation system based on multisource remote sensing data through the national key research and development programs for global change and adaptation during the thirteen-five period. This project will develop synergic inversion techniques for retrieving key parameters of biological and atmospheric cycles and for assimilating multisource remote sensing and ground based data. Then, the high resolution global carbon assimilation system coupled with an ecological model will be constructed. This system is able to assimilate jointly multisource observation data and to optimize key model parameters, photosynthesis and respiration carbon fluxes of global terrestrial ecosystems, and anthropogenic carbon emission fluxes of key regions. This system will be used to study quantitatively the spatial and temporal patterns of carbon fluxes of global terrestrial ecosystems and anthropogenic carbon emission fluxes of key regions and to identify the mechanisms driving the global terrestrial carbon sinks and sources. The outputs of this study will be helpful for the fulfillment of the key research and development programs for global change and adaptation and provide valuable data and technical support for the decision-making in China.     

Comparative Study of the Carbon Emission Situation and Goals between China and India

As the two large developing and populous countries, China and India face the dual challenges of economic development and climate change. Both of them are active in carbon emissions reduction, while India also bears the pressure of being “benchmarked” against China. With taking China and India as the sample of a comparative analysis, and the statistical value of a long sequence as the basic analysis data, based on the detailed analysis and comparison of carbon emissions history, the carbon emissions situation of the two countries from various dimensions including economic development, energy reserves and consumption, etc. were comparatively analyzed. The carbon intensity and energy structure after achieving the objectives were measured and compared by focusing on the carbon emissions reduction targets in China and India. The comparative results show that: China’s total carbon emissions are greater than India’s, but the growth rate of emissions, per capita emissions are significantly lower than India’s, while the carbon intensity decreases significantly faster than that of India. China has taken more efforts to make commitments to carbon reduction than India. With India’s energy structure adjustment, the situation will be gradually better than that in China.