Acoustic imaging,visualization, and quantification of buoyant hydrothermal plumes in the Ocean

We develop and apply visualization and quantification methods to reconstruct hydrothermal plumes in 3D from acoustic images and to make the first direct measurements from the reconstructions of scalar properties that describe the behavior of two buoyant plumes discharging from adjacent black smoker chimneys. The actual behavior is then compared to that predicted by a classic simple buoyant plume model. The images are reconstructed as isointensity surfaces of backscatter from particulate matter suspended in the plumes. The measurements pertinent to the role of the plumes as agents of dispersal of heat and mass into the ocean include change with height of diameter, particle distribution, dilution, centerline attitude, surface protrusions, and connectivity. The protrusions are the surface expression of eddies and appear to follow a bifurcating helical flow pattern that resemble simulation of the naturally forced flow of coherent vortex rings as the eddies rise with the buoyant plume. These direct measurements and the derived entrainment coefficient are generally consistent with behavior predicted by the simple buoyant plume model and support engulfment by vortex shedding as a primary mechanism for entrainment of surrounding seawater. Deviations from predicted buoyant plume behavior are diagnostic of particle dynamics.     

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.     

Platinum-group minerals in quaternary gold placers in the upper Chindwin area of northern Burma

In the Chindwin Basin in northern Burma, there is a system of five Pleistocene terraces in which gold placers with low concentrations of platinum-group minerals (PGM) occur. Samples were taken from four sites in the Chindwin Basin and one from near an ophiolite occurrence on the northeast side of the Chindwin Basin; they were studied under the microscope, with a scanning electron microscope, and an electron microprobe. The main minerals were Pt-Fe and Os-Ir-Ru alloys, usually in a ratio between 2 and 5. In most cases, the shape of the grains allowed a quick distinction between the two types. Sperrylite, laurite, irarsite, cooperite, tulameenite, and isomertieite occur infrequently as individual mineral grains and sometimes as inclusions in the alloy grains. Braggite, platarsite, hollingworthite, bowieite, keithconnite, cuproiridsite, malanite, stibiopalladinite, geversite, kashinite, several unnamed PGM, and Fe, Ni, and Cu sulfides were observed as inclusions, mainly in the Pt-Fe alloys and also to a lesser extent in the Os-Ir-Ru alloys. Lamellar and myrmekite-like intergrowths, oriented exsolution lamellae, and idiomorphic inclusions of sulfides in the alloys indicate a magmatic origin of the PGM. The origin of the PGM is assumed to be ophiolites in northern Burma. A continual decrease in mean grain size occurred during transport.

---

Platingruppenminerale in quartären Goldseifen im oberen Chindwingebiet in Nord-Burma

Zusammenfassung Im Gebiet des Chindwin Basin in Nordburma ist ein System von fünf pleistozänen Terrassen ausgebildet, in denen Goldseifen mit geringen Anteilen an PGM auftreten.PGM-Konzentrate von vier Vorkommen des Chindwin Basin und eine weitere Probe aus der Nähe eines Ophiolithvorkommens im Nordosten des Chindwin Basin wurden mit optischer Mikroskopie, Rasterelektronenmikroskopie und Mikrosonde untersucht.Hauptmineralien sind Pt-Fe-Legierungen und Os-Ir-Ru-Legierungen in einem Verhältnis von 2: 1 bis 5: 1. Ihre Morphologie kugeliger oder plattiger, teilweise idiomorpher Körner erlaubt in den meisten Fällen eine rasche Identifizierung der beiden Typen. Sehr selten treten als Einzelminerale, aber auch als Einschlüsse in Legierungen, Sperrylith, Laurit, Irarsit, Cooperit, Tulameenit und Isomertieit auf. Braggit, Platarsit, Hollingworthit, Bowieit, Keithconnit, Cuproiridsit, Malanit, Stibiopalladinit, Geversit, Kaschinit, einige unbekannte PGM und Fe-, Ni- und Cu-Sulfide wurden nr als Einschlüsse, hauptsächlich in Pt-Fe-Legierungen, weniger in Os-Ir-Ru-Legierungen, beobachtet.Lamellare und myrmekitische Verwachsungen, orientierte Entmischungen und idiomorphe Einschlüsse von Sulfiden in Legierungen weisen auf eine magmatische Entstehung der PGM hin. Die Herkunft der PGM wird in Ophiolithen Nordburmas vermutet. Beim Transport hat eine kontinuierliche Abnahme der mittleren Korngrösse stattgefunden.

---

---

With 8 Figures     

Crossing Filaments

Solar filaments show the position of large-scale polarity-inversion lines and are used for the reconstruction of large-scale solar magnetic field structure on the basis of Hα synoptic charts for the periods that magnetographic measurements are not available. Sometimes crossing filaments are seen in Hα filtergrams. We analyze daily Hα filtergrams from the archive of Big Bear Solar Observatory for the period of 1999 – 2003 to find crossing and interacting filaments. A number of examples are presented and filament patterns are compared with photospheric magnetic field distributions. We have found that all crossing filaments reveal quadrupolar magnetic configurations of the photospheric field and presume the presence of null points in the corona.     

Natural attenuation, biostimulation and bioaugmentation on biodegradation of polycyclic aromatic hydrocarbons (PAHs) in mangrove sediments

The biodegradability of a mixture of PAHs, namely fluorene (Fl), phenanthrene (Phe) and pyrene (Pyr), in mangrove sediment slurry was investigated. At the end of week 4, natural attenuation based on the presence of autochthonous microorganisms degraded more than 99% Fl and Phe but only around 30% of Pyr were degraded. Biostimulation with addition of mineral salt medium degraded over 97% of all three PAHs, showing that nutrient amendment could enhance Pyr degradation. Bioaugmentation with inoculation of a PAH-degrading bacterial consortium enriched from mangrove sediments did not show any promotion effect and the degradation percentages of three PAHs were similar to that by natural attenuation. Some inhibitory effect was observed in bioaugmentation treatment in week 1 with only 50% Fl and 70% Phe degraded. These results indicate that autochthonous microbes may interact and even compete with the enriched consortium during PAH biodegradation. Natural attenuation appeared to be the most appropriate way to remedy Fl- and Phe-contaminated mangrove sediments while biostimulation was more capable to degrade Pyr-contaminated sediments. The study also shows that although a large portion of the added PAHs (more than 95%) was adsorbed onto the sediments at the beginning of the experiment, most PAHs were degraded in 4 weeks, suggesting that the degraders could utilize the adsorbed PAHs efficiently.     

Assessment of village-wise groundwater draft for irrigation: a field-based study in hard-rock aquifers of central India

Extracted groundwater, 90% of which is used for irrigated agriculture, is central to the socio-economic development of India. A lack of regulation or implementation of regulations, alongside unrecorded extraction, often leads to over exploitation of large-scale common-pool resources like groundwater. Inevitably, management of groundwater extraction (draft) for irrigation is critical for sustainability of aquifers and the society at large. However, existing assessments of groundwater draft, which are mostly available at large spatial scales, are inadequate for managing groundwater resources that are primarily exploited by stakeholders at much finer scales. This study presents an estimate, projection and analysis of fine-scale groundwater draft in the Seonath-Kharun interfluve of central India. Using field surveys of instantaneous discharge from irrigation wells and boreholes, annual groundwater draft for irrigation in this area is estimated to be 212 × 10⁶ m³, most of which (89%) is withdrawn during non-monsoon season. However, the density of wells/boreholes, and consequent extraction of groundwater, is controlled by the existing hydrogeological conditions. Based on trends in the number of abstraction structures (1982–2011), groundwater draft for the year 2020 is projected to be approximately 307 × 10⁶ m³; hence, groundwater draft for irrigation in the study area is predicted to increase by ～44% within a span of 8 years. Central to the work presented here is the approach for estimation and prediction of groundwater draft at finer scales, which can be extended to critical groundwater zones of the country.     

Effectiveness of structural control based on control energy perspectives

A computational algorithm for maximizing the control efficiency in actively controlling the elastic structural responses during earthquake is proposed. Study of optimal linear control using a single degree of freedom shows that applying active control is very effective in reducing the structural displacement and velocity responses for long‐period structures, but at the same time it has an adverse effect in increasing the absolute acceleration response. The extent of this adverse effect reduces the effectiveness of the control system, and therefore it poses a limit on the maximum control force in order to provide maximum control efficiency. In view of this shortcoming, maximum control energy dissipation is used to define the most effective optimal linear control law. Less displacement and velocity response are expected as larger control force is applied, but there is always a limit that maximum control energy can be dissipated. This study shows that this limit depends on the structural characteristics as well as the input ground motion, and a general trend is that the maximum control energy decreases as damping increases. Finally, application of the proposed algorithm on a six‐storey hospital building is presented to show the effectiveness of using optimal linear control on a multi‐degree‐of‐freedom system from the control energy perspectives. Copyright © 2001 John Wiley & Sons, Ltd.     

Impact melting of the Cachari eucrite 3.0 Gy ago

Both the host phase and glass veins of the Cachari eucrite have been analyzed by microprobe and neutron activation analysis for their chemical compositions and by mass spectrometry for their ³⁹Ar-⁴⁰Ar gas retention ages. Cachari is chemically similar to other non-cumulate eucrites. The vesicular glass veins vary from pure glass, to devitrified glass, to areas that are substantially crystalline. The glassy areas have nearly the same concentrations of major and trace elements as the unmelted portions of Cachari, but some differences, probably due to preferential dissolution, occur along melt contacts. The glass formed by shock melting of Cachari host or of rock identical to it. ³⁹Ar-⁴⁰Ar data for the host and glass suggest distinctly different ages of 3.04 ±.07 Gy and 3.47 ±.04 Gy, respectively. The time of glass formation, which may also be the time of brecciation, is most likely given by the 3.0 Gy age of the host. The higher age for the glass is interpreted to represent incomplete Ar degassing during the 3.0 Gy event due to the greater resistance to Ar diffusion shown by the glass compared to the host. Event ages significantly younger than 4.5 Gy have now been determined for several eucrites and howardites and suggest a long dynamic regolith history for the parent body.