Theory and Practice of Soft Clay Engineering

-The shear strength and deformation properties of soft clay are discussed first. Then some methods for predicting the performance of soft clay foundation are proposed. Finally, case histories are presented to illustrate some discussed aspects of soft clay.     

Numerical simulation of coronal heating by resonant absorption of Alfvén waves

The heating of coronal loops by resonant absorption of Alfvén waves is studied in compressible, resistive magnetohydrodynamics. The loops are approximated by straight cylindrical, axisymmetric plasma columns and the incident waves which excite the coronal loops are modelled by a periodic external driver. The stationary state of this system is determined with a numerical code based on the finite element method. Since the power spectrum of the incident waves is not well known, the intrinsic dissipation is computed. The intrinsic dissipation spectrum is independent of the external driver and reflects the intrinsic ability of the coronal loops to extract energy from incident waves by the mechanism of resonant absorption.The numerical results show that resonant absorption is very efficient for typical parameter values occurring in the loops of the solar corona. A considerable part of the energy supplied by the external driver, is actually dissipated Ohmically and converted into heat. The heating of the plasma is localized in a narrow resonant layer with a width proportional to ^1/3. The energy dissipation rate is almost independent of the resistivity for the relevant values of this parameter. The efficiency of the heating mechanism and the localization of the heating strongly depend on the frequency of the external driver. Resonant absorption is extremely efficient when the plasma is excited with a frequency near the frequency of a so-called collective mode.     

The GeoForschungsZentrum Potsdam/Groupe de Recherche de Gèodésie Spatiale satellite-only and combined gravity field models: EIGEN-GL04S1 and EIGEN-GL04C

The recent improvements in the Gravity Recovery And Climate Experiment (GRACE) tracking data processing at GeoForschungsZentrum Potsdam (GFZ) and Groupe de Recherche de Géodésie Spatiale (GRGS) Toulouse, the availability of newer surface gravity data sets in the Arctic, Antarctica and North-America, and the availability of a new mean sea surface height model from altimetry processing at GFZ gave rise to the generation of two new global gravity field models. The first, EIGEN-GL04S1, a satellite-only model complete to degree and order 150 in terms of spherical harmonics, was derived by combination of the latest GFZ Potsdam GRACE-only (EIGEN-GRACE04S) and GRGS Toulouse GRACE/LAGEOS (EIGEN-GL04S) mean field solutions. The second, EIGEN-GL04S1 was combined with surface gravity data from altimetry over the oceans and gravimetry over the continents to derive a new high-resolution global gravity field model called EIGEN-GL04C. This model is complete to degree and order 360 and thus resolves geoid and gravity anomalies at half- wavelengths of 55 km at the equator. A degree-dependent combination method has been applied in order to preserve the high accuracy from the GRACE satellite data in the lower frequency band of the geopotential and to form a smooth transition to the high-frequency information coming from the surface data. Compared to pre-CHAMP global high-resolution models, the accuracy was improved at a spatial resolution of 200 km (half-wavelength) by one order of magnitude to 3 cm in terms of geoid heights. The accuracy of this model (i.e. the commission error) at its full spatial resolution is estimated to be 15 cm. The model shows a reduced artificial meridional striping and an increased correlation of EIGEN-GL04C-derived geostrophic meridional currents with World Ocean Atlas 2001 (WOA01) data. These improvements have led to select EIGEN-GL04C for JASON-1 satellite altimeter data reprocessing. Electronic Supplementary Material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Application of FLATModel, a 2D finite volume code, to debris flows in the northeastern part of the Iberian Peninsula

FLATModel is a two-dimensional shallow-water approximation code with corrections and modifications that create a simulation tool adapted to debris-flows behaviour. FLATModel uses the finite volume method with the numerical implementation of the Godunov scheme and includes correction terms regarding the effect of flow over high slopes and curvature. Additionally, the stop-and-go phenomenon, the basal entrainment and a correction regarding the front inclination of the final deposit are incorporated into FLATModel. In addition, different flow resistance laws were integrated in the numerical code including Bingham, Herschel–Bulkley and Voellmy fluid model. Firstly, our numerical model was validated using analytical solutions of a dam-break scenario and published data on a laboratory experiment. Secondly, three real events, which occurred in the northeastern part of the Iberian Peninsula, were back-calculated. Although field observations of the three events are not very detailed, the back-analyses revealed interesting patterns on the flow dynamics, and the numerical results generally showed good agreement with field data. Comparing the different flow resistance laws, the Voellmy fluid model presents the best behaviour regarding both the flow behaviour and the deposit characteristics. Preliminary simulation runs incorporating the effect of basal entrainment offered satisfactory results, although the final volume is rather sensitive on the selected friction angle of channel-bed material. The outcomes regarding the correction of the calculated front inclination of the final deposit showed that this implementation strongly improves the simulation results and better represents steep fronts of final deposits.     

Two case histories of tunnels through squeezing rocks

Summary The expression squeezing rock is a concept too vague to be used by practicing engineers. In this paper, it is assumed to mean large convergences of the tunnel walls.Two case histories are briefly presented. The Frejus tunnel was driven with a large overburden; on the contrary, the Sidi Mezghiche tunnel was shallow. Different techniques were used to control the convergences. In both cases, the tunnels were located in complex formations; the complexity stems from the heterogeneity and anisotropy of the rock masses, and no efficient technique is available to determine the geotechnical characteristics and the natural state of stress in the formations.     

Mineralogy and fluid inclusion study of polymetallic veins in the Madjarovo ore field,Eastern Rhodope,Bulgaria

Summary The formation of the Madjarovo polymetallic ore deposit is closely related to Paleogene magmatism of intermediate character represented by subvolcanic and volcanic rocks. Six stages of vein type mineralization were established: 1. quartz-pyrite-chalcopyrite with Bi-sulphosalts; 2. quartz-hematite-chlorite with gold; 3. quartz-galena-sphalerite; 4. quartz-barite-chalcedony with Sb-sulphosalts; 5. quartz-arsenic sulphosalts; 6. calcite-siderite. Ag-bearing galena and Fe-poor sphalerite are the main minerals. Galena of early formation is Bi-bearing, while in late stages it carries more Sb. Gold was found in two generations in different parageneses. The early gold is Ag-poor and related to hematite, while the late one is Ag-rich and closely associated with quartz and sulphosalts. Three groups of sulphosalts were established: Se-bearing Bi-sulphosalts; Sb-sulphosalts, a part of them Cl-bearing, and As-sulphosalts with more or less Ag. Fluid inclusion data obtained in quartz, amethyst, sphalerite and barite from several representative ore veins show formation temperatures in the range of 370° to 150°C for different stages of mineralization. Evidence of boiling fluids suggests pressures of 70 to 180 bars which correspond to an average depth of mineralization near 1.000 m. The low salinities of the fluids (a/v 3.5 eq. wt% NaCI) indicate influx of meteoric waters during mineralization. On the basis of mineralogical and fluid inclusion data physicochemical conditions and source of the ore forming fluids are discussed.

---

Mineralogie und Flüssigkeitseinschlüsse in polymetallischen Erzgngen der Lagerstätte Madjarovo, Ost-Rhodopen, Bulgarien

Zusammenfassung Die Bildung der polymetallischen Lagerstätte Madjarovo war eng verknüpft mit einem Paläogenen Magmatismus von intermediärem Charakter, der durch Subvulkanite und Vulkanite repräsentiert wird. Es wurden sechs Bildungsstadien der Gangvererzung festgestellt: 1. Quarz-Pyrit-Chalcopyrit mit Bi-Sulfosalzen; 2. Quarz-Hämatit-Chlorit mit Gold; 3. Quarz-Galenit-Sphalerit; 4. Quarz-Baryt-Chalzedon mit Sb-Sulfosalzen; 5. Quarz-As-Sulfosalze; 6. Calcit-Siderit. Ag-führender Galenit und Fe-armer Sphalerit sind die Hauptminerale. Früh gebildeter Galenit is Bi-haltig, während Galenite der späteren Bildungsstadien mehr Sb führen. Gold wurde in zwei Generationen in unterschiedlichen Paragenesen gefunden. Das Früh-Gold (Ag-arm) ist verknüpft mit Hämatit, während das Spät-Gold (Ag-reich) mit Quarz und Sulfosalzen eng assoziiert ist. Es wurden drei Gruppen von Sulfosalzen festgestellt: Se-führende Bi-Sulfosalze; Sb-Sulfosalze, die z.T. Cl-führend sind, und As-Sulfosalze mit mehr oder weniger Ag-Gehalten. Flüssigkeitseinschlüsse in Quarz, Amethyst, Sphalerit und Baryt aus mehreren repräsentativen Erzgängen zeigen Bildungtemperaturen von 370°–150°C für unterschiedliche Mineralisationsstadien. Siedende Lösungen weisen auf einen Druckbereich von 70–180 Bar hin, der einer durchschnittlichen Bildungstiefe von 1.000 m entspricht. Die durchweg niedrige Salinität der Lösungen (durchschnittlich 3.5. Gew.% NaCl äq.) wird auf einen Zufluß von meteorischen Wässern während der Mineralisation zurückgeführt. Auf der Basis der mineralogischen Ergebnisse und der Daten fluider Einschlüse werden die physikochemischen Bedingungen und die Herkunft der Erzlösungen diskutiert.

---

---

With 4 Figures     

Crystal chemistry of a highly disordered Mg-Al natural spinel

Summary A Mg-Al spinel from a xenolith found in the Sacrofano volcanic area (Latium, Italy) was investigated by X-ray single crystal diffraction and electron microprobe. Its main structural parameters were: a₀ = 8.0922(3) Å and the oxygen coordinate u = 0.26213(4), which gave to tetrahedral and octahedral bond distances of 1.9220(6) Å and 1.9299(3) Å respectively. Cation distribution, obtained from structural and chemical data, showed a very high Mg-Al disorder, with an Al(T) content of 0.205 and an inversion parameter, i, of about 0.23. Comparison with the cation distribution of a spinel with similar chemical composition but occurring in chlorite schists (Shishimsk Mountains, Urals, Russia) with a₀ = 8.1003(3) Å and u=0.26330(3), and with data from the literature concerning spinels from metamorphosed limestones (Kalkbro, Sweden) and websteritic dikes (Balmuccia, Italy), all characterized by much lower Mg-Al disorder (i about 0.13–0.12), suggests a completely different thermal history, with rapid cooling rates and consequent high closure temperature of intracrystalline exchange, consistent with the Sacrofano geological environment.

---

Kristallchemie eines stark ungeordneten, natürlichen Mg-Al-Spinells

Zusammenfassung Ein Mg-Al-Spinell aus einem Xenolith des Vulkangebiets von Sacrifano (Latium, Italien) wurde mit Röngten-Einkristallmethoden und der Elektronenmikrosonde untersucht. Die wichtigsten Strukturparameter sind a_o = 8,0922(3) Å und die Sauerstoffkoordinate u = 0,26213(4), was zu den tetraedrischen und oktaedrischen Bindungsabständen von 1,9220(6) Å bzw. 1,9299(3) Å führt. Die aus den strukturellen und chemischen Daten erhaltene Kationenverteilung zeigt eine sehr starke Unordnung Mg-Al mit einem Al (T)-Gehalt von 0,205 und einem Inversionsparameteri von ca. 0,23. Der Vergleich mit der Kationenverteilung eines Spinells ähnlicher chemischer Zusammensetzung, aber aus Chloritschiefern (Schischimsk-Berge, Ural, Rußland) mit a₀ = 8,1003(3) Å und u=0,26330(3), sowie mit Literaturdaten über Spinelle aus metamorphen Kalken (Kalkbro, Schweden) und websteritischen Gängen (Balmuccia, Italien), die alle durch eine viel geringere Mg-Al-Unordnung charakterisiert sind (i etwa 0,13–0,12), weist auf eine völlig andere thermische Geschichte hin, und zwar mit rascher Abkühlungsgeschwindigkeit und hoher Schließungstemperatur des intrakristallinen Austausches, was mit den geologischen Verhältnissen von Sacrofino in Übereinstimmung steht.

     

Mountain restoration: Soil and surface wildlife habitat

Much wildlife habitat is being destroyed by extractive resource industries in mountain environments. This article illustrates how mountain wildlife habitat was restored in a devastated area. A strip mine for coal on the east slopes of the Alberta Rockies, occupied during its operations by Rocky Mountain bighorn sheep (Ovis canadensis canadensis, Shaw 1803), was reclaimed as bighorn habitat. By considering the behaviour and habitat requirements of bighorns in conjunction with an operating coal mine and reclamation process, a large coal mining company has been able to reconstruct the mine site restoration to benefit mountain sheep. Although bighorn habitat requirements are well known, it was not until the animal and its requirements were studied against the backdrop of an operating coal mine that obvious recommendations regarding the maintenance and placement of high steep excavated rock faces were made and accepted by the government regulatory agencies. An open pit mine is a devastated landscape; trees, soil and overburden are removed to retrieve coal that may be up to 215 m underground. Overburden and soil are returned, but the disturbance compares to the barren landscapes left behind by glaciers. Contouring of the land, grading of overburden and soil, seeding with grass and legume mixtures and extensive fertilization are designed to speed plant colonization and soil development. By examining the bighorn's biological needs with respect to specific mining operations, a unique opportunity arose to employ McHarg's design with nature concept. This approach incorporates environmental and societal values into every aspect of development, and promotes the evaluation of the constraints and opportunities arising. The sheep numbered about 200. Their seasonal movements were similar to those found on native ranges. They used the reclaimed areas as winter range and for the mineral licks exposed during mining; in summer, the sheep moved to nearby alpine areas. Two thirds of all sightings were confined to 1.3 km² of reclaimed grassland; its average productivity (4190 kg/ha) exceeded native ranges (1700 kg/ha). The body mass of female sheep in autumn equalled that of the largest in Alberta, but the skull dimensions were not larger than those of adjacent ranges. Infestation with lungworms was moderate. Lamb production and survival were high. Design criteria should be: feeding areas should be dry and lie within 300 m of escape terrain, which should have a slope of 40% and contain at least three benches. Rock piles should be placed on grazing areas. Mineral licks, a vital welfare factor, already existed within the high walls created by strip mining.     

The occurrence of OH absorptions in phenakite—an IR spectroscopic study

Summary IR spectra of phenakite single crystals from different localities show a distinct variability in the region of the OH stretching fundamental. Minute hydrous mineral phases (tourmaline, bertrandite) are included in Piracicaba phenakite. Structural OH, ranging up to 0.005 equivalent wt.% H₂O, is characterized by two extremely pleochroic bands centered at 3380 and 3120 cm^–1. On the basis of their pleochroic scheme it is proposed that (O₂(OH)₂) and (O₃(OH)) tetrahedra occur as structural elements, assuming that the vacancies are on Be sites.

---

Das Auftreten von OH Absorptionen in Phenakit—eine IR spektroskopische Untersuchung

Zusammenfassung Die IR Spektren von Phenakit-Einkristallen verschiedener Vorkommen zeigen im Bereich der OH-Streckschwingungen eine deutliche Variabilität. Piracicaba Phenakit enthält feinste Einschlüsse von OH-hältigen Mineralphasen (Turmalin, Bertrandit). Strukturell gebundene OH-Gruppen (bis 0,005 äquivalente Gew.% H₂O) sind durch zwei extrem pleochroitische Banden bei 3380 und 3120 cm^–1 charakterisiert. Unter der Annahme von Be-Leerstellen werden aufgrund des Pleochroismus dieser Banden (O₂(OH)₂) und (O₃(OH)) Tetraeder als strukturelle Baueinheiten vorgeschlagen.

---

---

With 3 Figures