Siltation Prediction for Navigation Channels and Harbour Basins on Muddy Beach

- This paper, after briefly reviewing the experimental research on sediment transport on muddy beach since the 1950s, improves and perfects the method for forecasting siltation in navigation channels and harbour basins which was first put forward in China by the authors. In consideration of silty sediment and sand, some factors in forecasting methods have been changed and modified. Consequently, the modified methods can be used either to compute siltation in navigation channels and harbour basins on muddy beach or to compute siltation and scouring in navigation channels and harbour basins on both silty beach and sandy beach. The verification of field data from eleven large, medium and small natural harbours shows a good agreement between the forecasting by the modified method and the natural conditions. Finally, the paper deals with the rational utilization of water area after the construction of the West Dyke in Lianyungang, the maintenance of water depth of the navigation channel at the entrance, siltation distribution, siltation in the navigation channel and harbour basin for ships of 100 thousand tonnnage. Results once again prove that the prospect of constructing Lianyungang Harbour into a deepwater harbour is bright.     

Calculating Method and Verification of Wave Pressure Distribution on the Breast Wall of Mound Breakwater

In this paper, the calculating charts and formulae about wave pressure on the breast wall are derived with seven parameters on the basis of physical model study. The verification shows that the charts agree with the example, and are adopted in the Specifications of Fishery Harbours Breakwater by the Ministry of Agricultures.     

Trace metal-binding proteins in marine molluscs and crustaceans

Some marine invertebrates, such as the American oyster, Crassostrea virginica, the blue crab, callinectes sapidus and the American lobster, Homarusamericanus, concentrate trace metals in their tissues. The occurrence of metallothionein, a low molecular weight, sulfur-containing metal-binding protein, has been correlated with elevated levels of trace metals in these organisms. It is our hypothesis that, whilst metallothioneins are involved in the sequestration of elevated levels of trace metals, they primarily function in regulating normal metal metabolism. In this paper we describe recent field and laboratory experiments designed to examine how oysters, blue crabs and lobsters manage accumulated cadmium, copper and zinc. The possible rôles of metallothionein, as well as the tissue distribution of metals, are emphasized. Metallothioneins were found in all animals we examined; concentrations of metallothioneins and the the amount of bound trace metals are related to time of exposure. We have also demonstrated that the laboratory developed metallothionein models for blue crabs and lobsters may be useful in predicting the partitioning of trace metals in animals living in environments polluted with trace metals.     

Ship hull drag reduction using bottom air injection

The idea of bottom air injection to reduce ship hull resistance is not new. Early patents envisioned planing hull applications. Recent planing hull tests speed realized an increase of 7–12 knots. River barges and ship fitted with an air injection system results are presented to show a 10–15% reduction in the frictional resistance. Graphs for making initial estimates for displacement hulls with bottom air injection are presented. It is clear from these results that improvements in high speed planing catamarans and full form hull resistance can be realized by using bottom air injection.     

Theory and Practice of Soft Clay Engineering

-The shear strength and deformation properties of soft clay are discussed first. Then some methods for predicting the performance of soft clay foundation are proposed. Finally, case histories are presented to illustrate some discussed aspects of soft clay.     

Cadmium accumulation by the blue crab, callinectes sapidus: Involvement of hemocyanin and characterization of cadmium-binding proteins

The accumulation of cadmium from seawater by the blue crab, Callinectes sapidus, was studied as a function of metal concentration and exposure time, with special emphasis on cadmium-binding proteins. Cadmium was found, in decreasing order of magnitude, in gills, digestive gland and hemolymph. When exposed to 0·5 ppm cadmium for 2–24h, virtually all of the cadmium in the cytosolic fraction of the gill was associated with a low molecular weight (LMW) cadmium-binding protein (MW 8000). However, after 48h of exposure only 50% of the cadmium in the cytosol was bound to this protein. The rest wasfound to be associated with proteins of a molecular weight of 300 000 and 60 000. This pattern of cadmium distribution did not change over a 12-day depuration period. Similar results were obtained upon exposure to 0·1 ppm cadmium. The pattern of cadmium accumulation in the cytosolic fraction of the digestive gland was in marked contrast to that observed for the gill. Initially, the cadmium was distributed over three low molecular weight fractions. During depuration the distribution of cadmium changed and all of the metal became bound to a low molecular weight protein (MW 9000). The cadmium concentrations in the gill and digestive gland remained essentially constant during depuration (12 days). The LMW cadmium-binding proteins were purified by a combination of gelpermeation and ion-exchange chromatography. Their molecular weight, spectral properties and amino acid composition are characteristic of the vertebrate metallothioneins. During exposure to cadmium the metal rapidly appeared in the hemolymph, mainly associated with hemocyanin. During depuration cadmium was transferred from the hemolymph to the digestive gland, demonstrating that hemocyanin acts as a carrier in trace metal transport.     

Two case histories of tunnels through squeezing rocks

Summary The expression squeezing rock is a concept too vague to be used by practicing engineers. In this paper, it is assumed to mean large convergences of the tunnel walls.Two case histories are briefly presented. The Frejus tunnel was driven with a large overburden; on the contrary, the Sidi Mezghiche tunnel was shallow. Different techniques were used to control the convergences. In both cases, the tunnels were located in complex formations; the complexity stems from the heterogeneity and anisotropy of the rock masses, and no efficient technique is available to determine the geotechnical characteristics and the natural state of stress in the formations.     

Total ozone variations in the tropical belt: An application for quality of ground based measurements

Summary The study of the regime of ozone variations in the huge tropical belt (25° S to 25° N), which are, in general, very small and zonally nearly symmetric, permits to establish a statistical model for estimating the ozone deviations using Total Ozone Mapping Spectrometer (TOMS) data. The equatorial stratospheric winds at 25 and 50hPa and the solar flux at 10.7 cm are used as major predictors and the linear trend was also estimated. The 10m/sec stratospheric wind change is related to1.2% ozone change at the equator, to practically no change in the 8–15° belts and up to 1.4% change with opposite phase over the tropics in spring but nearly zero change in fall. The solar cycle related amplitude is about 1.4% per 100 units of 10.7 cm solar flux. The ozone trends are negative: not significant over the equator and about –2% per decade (significant at 95% level) over the tropics. The latter could have been enforced by the 2 to 4% lower ozone values during 1991–1993, part of which might be related to the effects of the Mt. Pinatubo eruption, but might also be due to the strong QBO. The estimated deviations are verified versus reliable observations and the very good agreement permits applying the model for quantitative quality control of the reported ozone data from previous years. The standard deviation of the difference between observed ozone deviations and those estimated from the model is only 0.9–1.6% for yearly mean, that means instruments used for total ozone observations in the tropical belt should have systematic error of less than 1%. Cases when the discrepancies between the model and reported observations at a given station exceed 2–3% for time interval of 2 or more years should be verified.With 17 Figures     

Use of precipitation data for diabatic initialization to improve the tropical analysis of divergence and moisture

Summary First, we review the present status of diabatic initialization used for numerical weather prediction and conclude that the deficiency of diabatic initialization mostly stems from the shortcoming in evaluating diabatic heating rates accurately, particularly the release of latent heat by cumulus convection. This indicates the need to adjust the initial conditions for physical processes, and Krishnamurti and his colleagues introduced in 1984 the concept of physical initialization. Since cumulus convection is most sensitive to input data among many physical processes, the adjustment of atmospheric input data to a prediction model to produce desired initial precipitation rates is referred to as cumulus initialization.In this article we describe a general approach to diabatic initialization with a special emphasis on cumulus initialization. We present the results of forecasting experiments with a version of the NCAR Community Climate Model (CCM) to demonstrate the efficacy of a cumulus initialization procedure to ameliorate the spinup problern of precipitation. Finally, we discuss application of the present methodology of cumulus initialization for a stability-dependent mass-flux cumulus parameterization of CCM2 to pave the way to complete the diabatic normal mode initialization package for CCM2. Note that the present cumulus initialization scheme can be used to assimilate into the atmospheric analysis of the tropics the precipitation rates estimated by satellite radiometric imagery data.With 8 FiguresThe National Center for Atmospheric Research is sponsored by the National Science Foundation     

Effects of water on strength and failure mode of coarse-grained granites at 300°C

Summary Deformation experiments have been performed in a triaxial compression cell at a temperature of 300°C and confining pressures up to 65 MPa using samples of homogeneous, fresh two-mica-granite (RM) and monzogranite (CM). The cylindrical specimens (d=70 mm, h=140 mm, V=540 cm³) were tested undrained under dry (105°C), as received, and water saturated conditions at deformation rates between and . The mechanical behaviour of the two types of coarse-grained, crystalloblastic granites is critically influenced by mineralogical composition, porosity, and the amount of intergranular water present in the samples. The failure stress of the CM granite is at about 65% of that of the RM granite; in both rocks strength decreases with increasing porosity and water content.The presence of interstitial water causes a failure mode of non-localized, homogeneously distributed microcracking in the central parts of the samples, whereas, in runs with dry granites, strain localization along a single shear fracture was observed. When aqueous fluids are present, the macroscopic style of deformation of granites appears to be ductile even at lowP andT conditions. Strength and angle of internal friction are reduced to very low values. The style of deformation, as well as the reduction of strength of the water-saturated rock samples, is due to mechanical and chemical effects of intergranular water at elevated temperatures.The maximum differential stresses measured for these coarse-grained granites are much lower than the strength commonly reported for other granites, e. g. Westerly and Charcoal granites. Our data suggest that the strength of the granitic crust under differential stress is lower than currently deduced from laboratory experiments.