Sedimentologic attributes of the Proterozoic siliciclastic packages of the Garhwal–Kumaun Lesser Himalaya,India: Implication for their relationship and palaeobasinal conditions

The present work addresses the long-standing issues on the characterization aspect of the Proterozoic siliciclastic successions exposed in the central part of the Lesser Himalaya, restricted between the Main Boundary Thrust (MBT) and the Main Central Thrust (MCT). Geologic, sedimentologic, and petrographic study divides the Lesser Himalaya in two zones- northern Palaeo- Mesoproterozoic Inner Lesser Himalayan (ILH) and southern Neoproterozoic Outer Lesser Himalayan (OLH) zones. The major lithofacies recognized from the zones are - (i) coarse grained siliciclastic (CGS), (ii) interbedded medium and fine-grained siliciclastic (IMFS), (iii) argillite (ARG), and (iv) siliciclastic–argillite rhythmites (SAR). Amongst all these facies, the nearshore IMFS facies shows consistent presence in both OLH and ILH zones. From the facies distribution pattern, a northwest–southeasterly trending palaeo- shoreline has been envisaged. The CGS facies in the ILH hints towards an alluvial fan setting during 1.8 Ga rifting phase associated with penecontemporaneous basic magmatism. Compositionally, the siliciclastics of both the zones (ILH and OLH) are arenite and wacke types with minimal variation in their detrital proportions, derived from the early Proterozoic (between 2.4-1.6Ga) Aravalli-Delhi Supergroup provenance. Nearly matching types and content of detrital modes and the lithofacies pattern of the ILH and OLH siliciclastics probably conclude the derivation from the rising (nearby) Aravalli-Delhi orogen and deposition in a foreland like situation.     

Biosedimentary record of postglacial coastal dynamics: high‐resolution sequence stratigraphy from the northern Tuscan coast (Italy)

Integrating analysis of the benthic palaeoecological record with multivariate ordination techniques represents a powerful synergy able to provide an improved characterization of coastal depositional facies in a sequence stratigraphical perspective. Through quantitative analysis of benthic foraminifer, ostracod and mollusc associations from the postglacial succession of Core M3 (Arno coastal plain, Tuscany, Italy), and application of detrended correspondence analysis (DCA) to the mollusc sub‐data set, we offer a refined picture of stratigraphical variations in faunal content from a paralic depositional setting, and reconstruct the palaeoenvironmental gradients that account for such variations. Despite distinct ecological behaviours, and taphonomic and sedimentological constraints, a strong ecological control on meio‐ and macrofaunal biofacies and taxa turnover is documented across the study succession. Amongst all possible mechanisms that may play a role in ‘shaping’ fossil distribution, the ecological signal driven by salinity represents the most prominent factor controlling the composition of fossil associations in the cored succession. Molluscs can even provide outstanding quantitative estimates of palaeosalinity along the sampled core. When plotted stratigraphically, the three fossil sub‐data sets show consistent patterns of vertical evolution that enable prompt identification of the key surfaces for sequence stratigraphical interpretation in otherwise lithologically indistinguishable deposits. The concomitant maximum richness of species with strong marine affinity, paralleled by the highest DCA salinity estimates, allows recognition of the maximum flooding zone, dated to ～7.7 cal. ka BP, within a homogeneous succession of outer lagoon clays. These clays are sandwiched between early transgressive, swamp to inner lagoon deposits and overlying prograding coastal?alluvial plain facies.     

Reappraisal of the structure of the Western Iron Ore Group, Singhbhum craton, eastern India: Implications for the exploration of BIF-hosted iron ore deposits

The middle to late Archean Iron Ore Group rocks occurring along the western margin (the Western Iron Ore basin) of the Singhbhum Granite massif in the Singhbhum craton were deformed during Iron Ore orogeny and are disposed in a horseshoe-shaped synclinal structure in the eastern part of the Indian shield. The Western Iron Ore basin hosts almost all the major high-grade iron ore deposits of eastern India. Contrary to the established view, present analysis emphasizes that the horseshoe fold in reality is a synclinorium consisting of a syncline–anticline fold pair which were later cross-folded along an east–west axis.

Structural analysis in the eastern anticline of the ‘horseshoe synclinorium’ suggests that the BIF hosting the high-grade iron ore bodies are disposed in three linear NNE–SSW trending belts, each showing an open synclinal geometry. Later cross folding produced development of widespread dome and basin pattern at the sub-horizontal hinge zones of these synclinal fold belts. The major iron ore deposits in the eastern anticline at the present level of erosion are preferentially localized within shallow elongated basinal structures only. The axis of the adjoining western syncline was similarly uplifted as partial culminations where cross-folded against E–W anticlinal axes. But here, the BIF-iron ore bodies are preferentially localized within elongated domal structures in contrast to the basinal sites in the adjacent eastern anticline. Such an inference based on structural analysis could probably be utilized as a potential tool for all future explorations, reserve estimation and recovery of the iron ore deposits in the terrain.     

Variation in groundwater levels and water quality in Chhatna Block, Bankura district, West Bengal — a GIS approach

Ground water levels and quality in Chhatna Block of West Bengal were studied based on different indices for irrigation and drinking purposes. A detailed hydrogeological investigation was carried out to have an overall idea of the aquifer system of the area. The ground water occurs under shallow to moderately deep water table condition. The groundwater is stored mostly in the weathered residuum and fractured — hard rock. Sodium absorption ratio (SAR), soluble sodium percentage (SSP), residual sodium bi-carbonate (RSBC), electrical conductance (EC), magnesium adsorption ratio (MAR) Kelly’s ratio (KR), total hardness (TH), permeability index (PI) were calculated as derived parameters, to investigate the ionic toxicity. From the results of chemical analysis, it was revealed that the values of Sodium Adsorption Ratio indicate that, ground water of the area falls under the category of low sodium hazard. So, there was neither salinity nor toxicity problem of irrigation water, and hence the ground water can safely be used for long-term irrigation. Plotting of analytical results of the groundwater collected from different areas in Piper’s trilinear diagram (1944) indicate that, the waters of the study area fall under fresh and sulphate rich region of the rhombus.     

Semi-automatic mapping of anthropogenic impervious surfaces in an urban/suburban area using Landsat 8 satellite data

Impervious surfaces have a significant impact on urban runoff, groundwater, base flow, water quality, and climate. Increase in Anthropogenic Impervious Surfaces (AIS) for a region is a true representation of urban expansion. Monitoring of AIS in an urban region is helpful for better urban planning and resource management. Cost effective and efficient maps of AIS can be obtained for larger areas using remote sensing techniques. In the present study, extraction of AIS has been carried out using Double window Flexible Pace Search (DFPS) from a new index named as Normalized Difference Impervious Surface Index (NDAISI). NDAISI is developed by enhancing Biophysical Composition Index (BCI) in two stages using a new Modified Normalized Difference Soil Index (MNDSI). MNDSI has been developed from Band 7 and Band 8 (PAN) of Landsat 8 data. In comparison to existing impervious surface extraction methods, the new NDAISI approach is able to improve Spectral Discrimination Index (SDI) for bare soil and AIS significantly. Overall accuracy of mapping of AIS, using NDAISI approach has been found to be increased by nearly 23% when compared with existing impervious surface extraction methods.     

Detection of ionospheric scintillation effects using LMD–DFA

The performance and measurement accuracy of global navigation satellite system (GNSS) receivers is greatly affected by ionospheric scintillations. Rapid amplitude and phase variations in the received GPS signal, known as ionospheric scintillation, affects the tracking of signals by GNSS receivers. Hence, there is a need to investigate the monitoring of various activities of the ionosphere and to develop a novel approach for mitigation of ionospheric scintillation effects. A method based on Local Mean Decomposition (LMD)–Detrended Fluctuation Analysis (DFA) has been proposed. The GNSS data recorded at Koneru Lakshmaiah (K L) University, Guntur, India were considered for analysis. The carrier to noise ratio (C/N₀) of GNSS satellite vehicles were decomposed into several product functions (PF) using LMD to extract the intrinsic features in the signal. Scintillation noise was removed by the DFA algorithm by selecting a suitable threshold. It was observed that the performance of the proposed LMD–DFA was better than that of empirical mode decomposition (EMD)–DFA.     

Rock slope instability assessment using spatially distributed structural orientation data in Darjeeling Himalaya (India)

We discuss a geographic information system (GIS)‐based methodology for rock slope instability assessment based on geometrical relationships between topographic slopes and structural discontinuities in rocks. The methodology involves (a) regionalization of point observations of orientations (azimuth and dip) of structural discontinuities in rocks in order to generate a digital structural model (DStM), (b) testing the kinematical possibility of specific modes of rock slope failures by integrating DStMs and digital elevation model (DEM)‐derived slope and aspect data and (c) computation of stability scenarios with respect to identified rock slope failure modes. We tested the methodology in an area of 90 km² in Darjeeling Himalaya (India) and in a small portion (9 km²) within this area with higher density of field structural orientation data. The results of the study show better classification of rock slope instability in the smaller area with respect to known occurrences of deep‐seated rockslides than with respect to shallow translational rockslides, implying that structural control is more important for deep‐seated rockslides than for shallow translational rockslides. Results of scenario‐based analysis show that, in rock slopes classified to be unstable, stress‐induced rock slope instability tends to increase with increasing level of water saturation. The study demonstrates the usefulness of spatially distributed data of orientations of structural discontinuities in rocks for medium‐ to small‐scale classification of rock slope instability in mountainous terrains. Copyright © 2010 John Wiley & Sons, Ltd.