Are there correlations between radio and optical axes of radio galaxies?

The relative orientations of radio and optical axes of radio galaxies have been examined on the basis of combined material from several smaller samples. Rotation axes of some radio galaxies have been redetermined assuming that the published measurements refer to rotational motions only. It is found that the rotation axis is quite different from those previous determinations, where rotation-expansion models were used. In particular, the correlation between radio source axes and rotation axes disappears when the allowance for expansion is dropped. No statistically significant correlation between optical major axes of the galaxy image and radio source axes is found when all existing measurements, now exceeding 140, are combined.     

The tectono‐stratigraphic evolution of the Austral Basin and adjacent areas against the background of Andean tectonics,southern Argentina,South America

The Austral Basin (or Magallanes Basin) in southern Argentina is situated in a highly active tectonic zone. The openings of the South Atlantic and the Drake Passage to the east and south, active subduction in the west, and the related rise of the Andes have massively influenced the evolution of this area. To better understand the impacts of these tectonic events on basin formation to its present‐day structure we analysed 2D seismic reflection data covering about 95 000 km² on‐ and 115 000 km² offshore (Austral ‘Marina’ and Malvinas Basin). A total of 10 seismic horizons, representing nine syn‐ and post‐ rift sequences, were mapped and tied to well data to analyse the evolution of sedimentary supply and depocenter migration through time. 1D well backstripping across the study area confirms three main tectonic stages, containing (i) the break‐up phase forming basement graben systems and the evolution of the Late Jurassic – Early Cretaceous ancient backarc Austral/Rocas Verdes Basin (RVB), (ii) the inversion of the backarc marginal basin and the development of the foreland Austral Basin and (iii) the recent foreland Austral Basin. Synrift sedimentation did not exceed the creation of accommodation space, leading to a deepening of the basin. During the Early Cretaceous a first impulse of compression due to Andes uplift caused rise also of parts of the basin. Controlling factors for the subsequent tectonic development are subduction, balanced phases of sedimentation, accumulation and erosion as well as enhanced sediment supply from the rising Andes. Further phases of rock uplift might be triggered by cancelling deflection of the plate and slab window subduction, coupled with volcanic activity. Calculations of sediment accumulation rates reflect the different regional tectonic stages, and also show that the Malvinas Basin acted as a sediment catchment after the filling of the Austral Basin since the Late Miocene. However, although the Austral and Malvinas Basin are neighbouring basin systems that are sedimentary coupled in younger times, their earlier sedimentary and tectonic development was decoupled by the Rio Chico basement high. Thereby, the Austral Basin was affected by tectonic impacts of the Andes orogenesis, while the Malvinas Basin was rather affected by the opening of the South Atlantic.     

Lymanα forests and the evolution of the universe

The Lyα forest absorption lines in the spectra of quasars are interpreted as caused by the crossings of the light beam with the walls of a bubble structure (expanding with the Hubble flow only). Then, the typical separation between the absorption lines is proportional to the mean size of the bubbles. The variable factor is the expansion rate H[z]. The Friedmann regression analysis of the observed line separations determines the density parameter ω₀ and the normalized cosmological term λ₀ = λc²/3H²₀ of the appropriate cosmological model: ω₀ = 0.014 ± 0.002, λ₀ = 1.080 ± 0.006. Depending on the Hubble parameter this method reveals the values of the present mean matter density pm,0 = 2.6 h² · 10⁻²⁸ kg m⁻³ and of the cosmological constant Λ = 3.77 h² · 10⁻⁵² m⁻² (with h = H₀/(100 km/s·Mpc)). According to our analysis all models with Λ = 0 must be excluded. The curvature of space is positive. The curvature radius R₀ is 3.3 times the Hubble radius (c/H₀). The age t₀ is 2.8 times the Hubble age (H₀⁻¹).     

High-resolution ion-microprobe measurement of lead isotopes: Variations within single zircons from Lac Seul,northwestern Ontario

Selected-area measurements of lead-isotope ratios in zircons have been made at high mass resolution using a modified A.E.I. IM20 ion-microprobe. At a working resolution of 3200 it is shown that the important interfering molecular peaks generated from the zircon matrix may be separated from atomic lead peaks. Corrections for overlapping peaks, which are necessary in measurements of lead isotopes at low mass resolution, are then only required for ²⁰⁸Pb.Measurements on N.B.S. standards show no isotope discrimination within counting statistics. Determination of ²⁰⁷Pb/²⁰⁶Pb on 29 single zircon grains from a tonalite gneiss and a granite from Lac Seul, northwestern Ontario, give very variable ratios with mean values close to those of bulk separates. Peaks in the distribution of 207/206 ratios obtained from the tonalite gneiss may be interpreted as evidence for two stages of lead loss. High 207/206 ratios are shown to be significant for at least two zircons and probably record a minimum age of formation of 3.3 ± 0.1 b.y. for the gneiss.     

Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.     

Growth, ionic and osmotic relations of an Allenrolfea occidentalis population in an inland salt playa of the Great Basin Desert

Variation in growth, physiology and ionic relations patterns of Allenrolfea occidentalis, a perennial halophyte of dry habitats, was studied under field conditions from May 1996 to November 1997. An A. occidentalis community has a characteristic soil pH of 7·3–8·3. During the two years, the population was exposed to great variations in soil salinity, from 29 to 146 dS m⁻¹, and soil moisture, ranging from drought (9·2%) to wet (19%). The salt concentrations were significantly higher in the surface soil layers than in the subsurface layers. Seasonal changes in dry weight are directly related to soil salinity stress. Allenrolfea occidentalis had greater growth and biomass production under saline conditions. Na⁺and Cl⁻ions were accumulated in plant tissues in much greater amounts than K⁺, Ca²⁺, and Mg²⁺. Soil salinities were significantly reduced at the end of the growing season. Water potentials of the shoots decreased significantly with increasing salinity. The plant (F_v/F_mratio) was more affected by salinity and irradiation levels during the summer period.     

RHESSI Microflares: II. Implications for Loop Structure and Evolution

We present simple analytic models which predict the peak X-ray emission measure and temperature attained in flares in which the chromospheric evaporation process takes place either in a single ‘monolithic’ loop or in a loop consisting of several filaments that are created successively as the energy release process proceeds in time. As possible mechanisms driving chromospheric evaporation we consider both classical heat conduction from the loop top and non-thermal electron beams. The model predictions are tested for a set of 18 well studied RHESSI microflares. The results suggest beam driven evaporation in filamented loops as being capable of accounting for the observed emission measures and temperatures though there are issues with the very high beam densities needed. On the other hand, estimates of the emission measures achieved by conductive evaporation which are derived by using the Rosner – Tucker – Vaiana (RTV) scaling law are much larger than the observed ones. Possible reasons for this discrepancy are discussed.     

A Bayesian approach to inverse modelling of stratigraphy, part 2: Validation tests

A novel inverse modelling method is applied to the problem of constraining the environmental parameters (e.g. relative sea level, sediment supply) that control stratigraphic architecture. This technique links forward modelling of shallow-marine wave/storm-dominated stratigraphy to a combination of inverse methods formulated in a Bayesian framework. We present a number of examples in which relative sea-level and sediment-supply curves were inferred from synthetic vertical successions of grain size (e.g. wells) and synthetic thickness curves (e.g. seismically derived isopachs) extracted from a forward model simulation. These examples represent different scenarios that are designed to test the impact of data distribution, quantity and quality on the uncertainty of the inferred parameters. The inverse modelling approach successfully reproduces the gross stratigraphic architectures and relative sea level and sediment-supply histories of the synthetic forward model simulation, within the constraints of the modelled data quality. The relative importance of the forcing parameters can be evaluated by their sensitivity and impact on the inverted data. Of equal importance, the inverse results allow complete characterisation of the uncertainties inherent to the stratigraphic modelling tool and to the data quality, quantity and distribution. The numerical scheme also successfully deals with the problem of non-uniqueness of the solution of the inverse problem. These preliminary results suggest that the inverse method is a powerful tool in constraining stratigraphic architecture for hydrocarbon reservoir characterisation and modelling, and it may ultimately provide a process-based geological complement to standard geostatistical tools.     

Impact of Gas Adsorption Induced Coal Matrix Damage on the Evolution of Coal Permeability

It has been widely reported that coal permeability can change from reduction to enhancement due to gas adsorption even under the constant effective stress condition, which is apparently inconsistent with the classic theoretical solutions. This study addresses this inconsistency through explicit simulations of the dynamic interactions between coal matrix swelling/shrinking induced damage and fracture aperture alteration, and translations of these interactions to permeability evolution under the constant effective stress condition. We develop a coupled coal–gas interaction model that incorporates the material heterogeneity and damage evolution of coal, which allows us to couple the progressive development of damage zone with gas adsorption processes within the coal matrix. For the case of constant effective stress, coal permeability changes from reduction to enhancement while the damage zone within the coal matrix develops from the fracture wall to further inside the matrix. As the peak Langmuir strain is approached, the decrease of permeability halts and permeability increases with pressure. The transition of permeability reduction to permeability enhancement during gas adsorption, which may be closely related to the damage zone development in coal matrix, is controlled by coal heterogeneity, external boundary condition, and adsorption-induced swelling.