Assessment of rock slope stability by probabilistic-based Slope Stability Probability Classification method along highway cut slopes in Adilcevaz-Bitlis (Turkey)

Rock slope stability is of great concern along highway routes as stability problems on cut slopes may cause fatal events as well as loss of property. In rock slope engineering, stability evaluations are commonly performed by means of analytical or numerical analyses, principally considering the factor of safety concept. As a matter of fact, the probabilistic assessment of slope stability is progressively getting popularity due to difficulties in assigning the most appropriate values to design parameters in analytical or numerical methods. Additionally, the effect of heterogeneities in rock masses and discontinuities on the analysis results is minimized through the probabilistic concept. In this study, slope stability of high and steep sedimentary rock cut slopes along a state highway in Adilcevaz-Bitlis (Turkey) was evaluated on the basis of probabilistic approach using the Slope Stability Probability Classification (SSPC) system. The probabilistic assessment indicates major slope stability problems because of discontinuity controlled and discontinuity orientation independent mass movements. Almost all studied cut slopes suffer from orientation-independent stability problems with very low stability probabilities. Additionally, the probability of planar and toppling failures is significantly high with respect to the SSPC system. The stability problems along the investigated rock slopes were also verified by field reconnaissance. Remedial measures such as slope re-design and reinforcement at the studied locations should be taken to prevent hazardous events along the highway. On the other hand, the probabilistic approach may be a useful tool during rock slope engineering to overcome numerous uncertainties when probabilistic and analytic results are compared.     

Misconceptions about the Hubble recession law

Almost all astronomers now believe that the Hubble recession law was directly inferred from astronomical observations. It turns out that this common belief is completely false. Those models advocating the idea of an expanding universe are ill-founded on observational grounds. This means that the Hubble recession law is really a working hypothesis. One alternative to the Hubble recession law is the tired-light hypothesis originally proposed by Zwicky (Proc. Nat. Acad. Sci. 15:773, 1929). This hypothesis leads to a universe that is an eternal cosmos continually evolving without beginning or end. Such a universe exists in a dynamical state of virial equilibrium. Observational studies of the redshift-magnitude relation for Type Ia supernovae in distant galaxies might provide the best observational test for a tired-light cosmology. The present study shows that the model Hubble diagram for a tired-light cosmology gives good agreement with the supernovae data for redshifts in the range 0<z<2. This observational test of a static cosmology shows that the real universe is not necessarily undergoing expansion nor acceleration. An erratum to this article can be found at     

Seismic clusters and their characteristics at the Arabian Sea Triple Junction: Supportive evidences for plate margin deformations

The plate margin features defining the Arabian Sea Triple Junction (ASTJ) are: the Aden Ridge (AR), Sheba Ridge (SR) with their intervening Alula-Fartak Transform (AFT), Carlsberg Ridge (CR) and Owen Fracture Zone (OFZ). Exact nature of ASTJ is presently debated: whether it is RRF (ridge-ridge-fault) or RRR (ridge-ridge-ridge) type. A revised seismicity map for ASTJ is given here using data for a period little more than a century. “Point density spatial statistical criterion” is applied to short-listed 742 earthquakes (mb ≥ 4.3), 10 numbers of spatio-temporal seismic clusters are identified for ASTJ and its arms. Relocated hypocentres help better constraining the cluster identification wherever such data exist. Seismic clusters actually diagnose the most intense zones of strain accumulation due to far field as well as the local stress operating at ASTJ. An earthquake swarm emanating from a prominent seismic cluster below SR provides an opportunity to investigate the pore pressure diffusion process (due to the active source) by means of “r-t plot”. Stress and faulting pattern in the active zones are deduced from 43 CMT solutions. While normal or lateral faulting is characteristic for these arms, an anomalous thrust earthquake occurs in the triangular ‘Wheatley Deep’ deformation zone proximal to ASTJ. The latter appears to have formed due to a shift of the deformational front from OFZ towards a transform that offsets SR. Though ASTJ is still in the process of evolution, available data favour that this RRF triple junction may eventually be converted to a more stable RRR type.     

A comparative study of sequential minimal optimization-based support vector machines,vote feature intervals,and logistic regression in landslide susceptibility assessment using GIS

Landslide susceptibility assessment using GIS has been done for part of Uttarakhand region of Himalaya (India) with the objective of comparing the predictive capability of three different machine learning methods, namely sequential minimal optimization-based support vector machines (SMOSVM), vote feature intervals (VFI), and logistic regression (LR) for spatial prediction of landslide occurrence. Out of these three methods, the SMOSVM and VFI are state-of-the-art methods for binary classification problems but have not been applied for landslide prediction, whereas the LR is known as a popular method for landslide susceptibility assessment. In the study, a total of 430 historical landslide polygons and 11 landslide affecting factors such as slope angle, slope aspect, elevation, curvature, lithology, soil, land cover, distance to roads, distance to rivers, distance to lineaments, and rainfall were selected for landslide analysis. For validation and comparison, statistical index-based methods and the receiver operating characteristic curve have been used. Analysis results show that all these models have good performance for landslide spatial prediction but the SMOSVM model has the highest predictive capability, followed by the VFI model, and the LR model, respectively. Thus, SMOSVM is a better model for landslide prediction and can be used for landslide susceptibility mapping of landslide-prone areas.     

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.     

Hawking radiation of Kerr-de Sitter black holes using Hamilton-Jacobi method

Hawking radiation of Kerr-de Sitter black hole is investigated using Hamilton-Jacobi method. When the well-behaved Painleve coordinate system and Eddington coordinate are used, we get the correct result of Bekenstein-Hawking entropy before and after radiation but a direct computation will lead to a wrong result via Hamilton-Jacobi method. Our results show that the tunneling probability is related to the change of Bekenstein-Hawking entropy and the derived emission spectrum deviates from the pure thermal but it is consistent with underlying unitary theory.     

The first field-based descriptions of pumping-induced saltwater intrusion and upconing

Development of the ideas about the equilibrium between freshwater and saline water has received considerable attention in the literature, but little has been written so far about the earliest scientific works about well salinization. Based on a review of the literature from the second half of the 19th century and the early 20th century, this historical note explores how insights into groundwater abstraction and saltwater intrusion developed, and examples of the earliest field studies are provided. Fundamental research was driven by the need for increasing water supply, but the progress of science did not lead to sustainable management practices everywhere. Research outcomes were shared between scientists of different countries, marking the beginning of coastal hydrogeology as a scientific specialization in the first decade of the 20th century.     

Processes of initial collision and suturing between India and Asia

The initial collision between Indian and Asian continents marked the starting point for transformation of land-sea thermal contrast, uplift of the Tibet-Himalaya orogen, and climate change in Asia. In this paper, we review the published literatures from the past 30 years in order to draw consensus on the processes of initial collision and suturing that took place between the Indian and Asian plates. Following a comparison of the different methods that have been used to constrain the initial timing of collision, we propose that the tectono-sedimentary response in the peripheral foreland basin provides the most sensitive index of this event, and that paleomagnetism presents independent evidence as an alternative, reliable, and quantitative research method. In contrast to previous studies that have suggested collision between India and Asia started in Pakistan between ca. 55 Ma and 50 Ma and progressively closed eastwards, more recent researches have indicated that this major event first occurred in the center of the Yarlung Tsangpo suture zone (YTSZ) between ca. 65 Ma and 63 Ma and then spreading both eastwards and westwards. While continental collision is a complicated process, including the processes of deformation, sedimentation, metamorphism, and magmatism, different researchers have tended to define the nature of this event based on their own understanding, an intuitive bias that has meant that its initial timing has remained controversial for decades. Here, we recommend the use of reconstructions of each geological event within the orogenic evolution sequence as this will allow interpretation of collision timing on the basis of multidisciplinary methods.     

The structure of the mid- and high-latitude ionosphere during the November 2004 storm event obtained from GPS observations

GPS data from the International GNSS Service (IGS) network were used to study the development of the severe geomagnetic storm of November 7–12, 2004, in the total electron content (TEC) on a global scale. The TEC maps were produced for analyzing the storm. For producing the maps over European and North American sectors, GPS measurements from more than 100 stations were used. The dense network of GPS stations provided TEC measurements with a high temporal and spatial resolution. To present the temporal and spatial variation of TEC during the storm, differential TEC maps relative to a quiet day (November 6, 2004) were created. The features of geomagnetic storm attributed to the complex development of ionospheric storm depend on latitude, longitude and local time. The positive, as well as negative effects were detected in TEC variations as a consequence of the evolution of the geomagnetic storm. The maximal effect was registered in the subauroral/auroral ionosphere during substorm activity in the evening and night period. The latitudinal profiles obtained from TEC maps for Europe gave rise to the storm-time dynamic of the ionospheric trough, which was detected on November 7 and 9 at latitudes below 50°N. In the report, features of the response of TEC to the storm for European and North American sectors are analyzed.