Relation between temperature changes of the mid-upper troposphere over Eurasian mid-high latitudes and solar irradiance in the twentieth century

The δ¹⁸O data obtained from an 18.7 m ice core drilled in Chongce Ice Cap at an elevation of 6,530 m a.s.l. in the West Kunlun Mountains on the northern Tibetan Plateau show a strong correlation with the summer temperature of the middle to upper troposphere over the mid-high latitudes of Eurasia. Based on this, the δ¹⁸O record can be used as a proxy of the June–September mean temperature of the mid-upper troposphere (MUT) from 1903 to 1992. The time span of the ice core record is much longer than the meteorological data available only after 1948. Using the empirical mode decomposition method (EMD), the δ¹⁸O record is decomposed into various frequency components and compared with the solar irradiance variations of the same period. The results show that (1) The June–September mean temperature of the MUT over Eurasian mid-high latitudes is completely decomposed into four IMF (intrinsic mode function) components and an increasing trend. (2) Solar irradiance is decomposed into the Schwabe cycle, the Hale cycle, the Gleissberg cycle, and an increasing trend. (3) The correlation coefficients between the June and September mean temperatures of the MUT over Eurasian mid-high latitudes and solar irradiance on the longer timescales (at least more than 11-year) show the significant correlations; their phase changes are basically identical in general, and (4) the 11-year Schwabe cycle exists in the June–September mean temperature of the MUT over Eurasian mid-high latitudes during most of the time from 1903 to 1992, and only in the two high-temperature phases (1929–1944 and from 1975 to the present) may global warming disturb this relation. A full understanding of this phenomenon would shed insight into the potential consequence of global warming on the MUT.     

Post-Aswan dam sedimentation rate of lagoons of the Nile Delta,Egypt

This study uses radiometric analysis (²¹⁰Pb and ¹³⁷Cs) of short sediment cores with high-resolution sampling (1-cm interval) to trace sedimentation rates in the Nile Delta lagoons, particularly since completion of the Aswan High Dam in 1964. A declining trend in ²¹⁰Pb_ex as calculated by the CIC model is clearly identified in about 10 cm of the upper-core sediments from the lagoons of Manzala and Edku, accompanied by two spikes of ¹³⁷Cs in cores from the lagoons of Burullus and Edku. These findings illustrate average post-dam sedimentation rates ranging from 0.22 to 0.27 cm a⁻¹ in the lagoons, in contrast with those found previously based on low-resolution sampling. The lower sedimentation rates in the lagoons are a consequence of a dramatic reduction in riverine sediment load to the coastal area as a result of the damming. Although widespread erosion occurs along the open estuarine coast, the lagoon setting remains calmer than before due to coastal diking and freshwater regulation in the delta plain in the past decades. This provides the possibility of continuously preserved radiometric records in the less-bioturbated lagoon sediments. Dating individual layers using the CRS model has revealed increasing sedimentation rates in Manzala and Burullus since the 1980s, which can largely be explained as a consequence of the reduction in lagoon area due to intensifying reclamation. The post-dam sedimentation in the shrinking lagoons may have some adverse ecological consequences due to finer sediment’s affinity with pollutants. These findings would shed light on the environmental conservation and socioeconomic development in the Nile Delta region.     

PLL Tracking Performance in the Presence of Oscillator Phase Noise

The tracking performance of a Phase Lock Loop (PLL) is affected by the influence of several error sources. In addition to thermal noise and dynamic stress error, oscillator phase noise can cause significant phase jitter which degrades the tracking performance. Oscillator phase noise is usually caused by two different effects: Allan deviation phase noise is caused by frequency instabilities of the receiver's reference oscillator and the satellite's frequency standard. It can be termed as system-inherent phase noise and is relevant for both static and dynamic applications. “External” phase noise, however, is caused by vibration and is a major problem for dynamic applications. In the context of this paper, both types of phase noise will be modeled and the resulting integrals will be evaluated for PLLs up to the third order. Besides, phase jitter induced by thermal noise and signal dynamics will also be discussed, thus providing all necessary formulas for analyzing the performance of a phase lock loop in case of different forms of stress. Since the main focus is centered on the effects of oscillator phase noise, the overall PLL performance is graphically illustrated with and without consideration of oscillator phase noise. © 2002 Wiley Periodicals, Inc.     

Club convergence and spatial distribution dynamics of carbon intensity in China’s construction industry

Climate change caused by carbon emissions continuously threatens sustainable development. Due to China’s immense territory, there are remarkable regional differences in carbon emissions. The construction industry, which has strong internal industrial differences, further leads to carbon emission disparity in China. Policymakers should consider spatial effects and attempt to eliminate carbon emission inequality to promote the sustainable development of the construction industry and realize emission reduction targets. Based on the classic Markov chain and spatial Markov chain, this paper investigates the club convergence and spatial distribution dynamics of China’s carbon intensity in the construction industry from 2005 to 2014. The results show that the provincial carbon intensity in the construction industry is characterized by “convergence clubs” during the research period, and very low-level and very high-level convergence clubs have strong stability. Moreover, the carbon intensity class transitions of provinces tend to be consistent with that of their neighbors. Furthermore, the transition of carbon intensity types is highly influenced by their regional backgrounds. The provinces with high carbon emissions have a negative influence on their neighbors, whereas the provinces with low carbon emissions have a positive influence. These analyses provide a spatial interpretation to the “club convergence” of carbon intensity.     

一种用于海底类型聚类的新方法

By using sonar imaging, this paper presents a new algorithm for the clustering of seabed types based on the self-organizing feature maps （SOFM） neural network. The theory as well as data processing is studied in detail. Some valuable conclusions and suggestions are given     

Pulsatory characteristics of wind velocity in sand flow over typical underlying surfaces

Pulsatory characteristics of wind velocity in sand flow over Gobi and mobile sand surface have been investigated experimentally in the wind tunnel. The primary goal of this paper is to reveal the relation- ship between pulsatory characteristics of instantaneous wind speed in sand flow and the motion state of sand grains. For a given underlying surface, pulsation of wind velocities in sand flow on different heights has a good correlation. As the space distance among different heights increases, fluctuation of instantaneous wind speed presents a decreasing trend and its amplitude is closely related to the mo- tion state of sand grains and their transport. Pulsatory intensity increases with the indicated wind speed, but its relative value does not depend on it, only agrees with height.     

Evaluation of the effect of river style framework on water quality: application of geomorphological factors

The Tarwal River basin with an area of 6560.20 km² is located in the eastern part of Iranian Kurdistan Province. This river crosses the Qorveh and Dehgolan plains and joins the Ghezel Ozan River in Zanjan Province. The importance of this river as a source for drinking water and agricultural and industrial uses in the region necessitates the need for research in this field. The main purpose of this study is to identify the natural features of the riverbed from the perspective of river geomorphology and to investigate their impact on water quality and river self-purification capacity. To achieve this, the river style framework was employed. To investigate the effects of each style framework on the river, a total of 20 samples from the entrance and outlet of styles were obtained using Impact Assessment method and sampling standards which were later analyzed for their quality parameters including T, pH, EC, TDS, TSS, Na, Ca, Mg, K, Cl, F, NO₂, NO₃, SO₄, PO₄, DO, COD and BOD. The results indicated that the changes in the styles lead to changes in water quality and the impact of each style is greater on the physical parameters than the chemical parameters. The river self-purification capacity varied depending on the style. The maximum and the minimum self-purifications occurred in fine-grained Anabranching and low-sinuosity fine-grained styles, respectively.     

Geochemical evaluation of Niger Delta sedimentary organic rocks: a new insight

A geochemical evaluation of Niger Delta organic matter was carried out using supercritical fluid extraction (SFE) sample preparation procedure. Comparison of geochemical significance of gas chromatographic data of rock extracts of SFE with those of Soxhlet extraction method from previous studies was made in order to establish the usefulness of SFE in geochemical exploration. The assessment of geochemical character of the rock samples from the comparison and interpretation of other geochemical parameters were used to give more insights into understanding the source rocks characteristics of onshore and shelf portions of the Niger Delta Basin. The results of the gas chromatographic (GC) analysis of the rock extracts across the lithostratigraphic units show that Pr/Ph, Pr/nC₁₇, Pr/nC₁₈, CPI and odd/even preference ranged from 0.07 to 12.39, 0.04 to 6.66, 0.05 to 13.80, 0.12 to 8.4 and 0.06 to 8.12, respectively. The Rock-Eval pyrolysis data and geochemical ratios and parameters calculated from the GC data showed that most of the samples are mature and have strong terrestrial provenance while a few samples have strong marine provenance. The few marine source rocks are located in the deeper depth horizon. Pr/Ph and standard geochemical plots indicate that most of samples were derived from organic matter deposited in less reducing conditions, i.e. more of oxidizing conditions while a few samples have predominantly influence of reducing conditions. The results of trace metal analysis of older samples from Agbada Formation also indicate marine and mixed organic matter input deposited in less reducing conditions. The results obtained in this study are comparable with those obtained from previous studies when Soxhlet extraction method was used and also indicated the presence of more than one petroleum systems in the Niger Delta.     

Output-only identification of the modal and physical properties of structures using free vibration response

The viability of a complete structural characterization of civil structures is explored and discussed. In particular, the identification of modal (i.e. natural frequencies, damping ratios and modal shapes) and physical properties (i.e. mass and stiffness) using only the structure’s free decay response is studied. To accomplish this, modal analysis from free vibration response only (MAFVRO) and mass modification (MM) methodologies are engaged along with Wavelet based techniques for optimal signal processing and modal reconstruction. The methodologies are evaluated using simulated and experimental data. The simulated data are extracted from a simple elastic model of a 5 story shear building and from a more realistic nonlinear model of a RC frame structure. The experimental data are gathered from shake table test of a 2-story scaled shear building. Guidelines for the reconstruction procedure from the data are proposed as the quality of the identified properties is shown to be governed by adequate selection of the frequency bands and optimal modal shape reconstruction. Moreover, in cases where the structure has undergone damage, the proposed identification scheme can also be applied for preliminary assessment of structural health.