Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.     

Benthic nutrient fluxes in the intertidal flat within the Changjiang （Yangtze River） Estuary

In an annual cycle from March 2005 to February 2006, benthic nutrient fluxes were measured monthly in the Dongtan intertidal flat within the Changjiang （Yangtze River） Estuary. Except for NH4^＋, there always showed high fluxes from overlying water into sediment for other four nutrients. Sediments in the high and middle marshes, covered with halophyte and consisting of macrofauna, demonstrated more capabilities of assimilating nutrients from overlying water than the low marsh. Sampling seasons and nutrient concentrations in the overlying water could both exert significant effects on these fluxes. Additionally, according to the model provided by previous study, denitrification rates, that utilizing NO3- transported from overlying water （Dw） in Dongtan sediments, were estimated to be from -16 to 193 μmol·h^-1·m^-2 with an average value of 63 μmol·h^-1·m^-2 （n=18）. These estimated values are still underestimates of the in-situ rates owing to the lack of consideration of DN, i.e., denitrification supported by the local NO3^- production via nitrification.     

Heavy metal contamination of cultivated wetland soils along a typical plateau lake from southwest China

Topsoil (0–20 cm) samples were collected from four cultivated wetlands including Northern and Western Fields (about 30-year tillage), and Southern and Western Fields (about 20-year tillage) along the Yilong Lake of China in October, 2005. Total concentrations of As, Cr, Cu, Pb, and Zn were determined using the inductively coupled plasma atomic absorption spectrometry in order to assess contamination status in four sampling plots. Results showed that the average concentrations of these heavy metals in Northern and Western Fields were significantly (P < 0.01) higher than those in reference soils, while they were generally lower in Southern and Eastern Fields. All the mean concentrations of heavy metals were lower, except that the average concentrations of As and Cr in Northern Field slightly exceeded the soil quality guidelines. The contamination indices showed low-contamination levels for As, Cu, Pb, and Zn in Northern and Western Fields, while no contamination levels could be observed in Southern and Eastern Fields. As for Cr, they showed moderate-contamination levels in Northern Field, but low or no contamination levels in other three Fields. The integrated contamination index values indicated Northern and Western Fields were moderately contaminated, while Southern and Eastern Fields were less contaminated. The same contamination sources of these heavy metals were identified in these fields using factor- and cluster analysis.     

凹凸棒石粘土吸附铀的性能研究及应用

本文研究了凹凸棒石粘土吸铀的酸度,吸附速率、肿附反应热焓吸附容量等性能,确定了吸附铀的最佳条件,并采用动态法片处理了含铀废水,效果良好,钱的去除率在９９．９５％以上,排放液中的铀的残余浓度达到国家规定的０．０５ｍｇ／Ｌ排放标准。     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

Extraction of Alteration Mineral Information from Moderate Remote Sensing Images Using MPS Method

Although alteration minerals related to metallogenesis is very important in mineral exploration, information of alteration mineral is weakly expressed in remote sensing imagery, which is often subject to interfering noise and sometimes limited in spectral and spatial resolutions. Because of easy access, moderate images are the main sources of alteration mineral information. Therefore, it is very important to develop alteration mineral information extraction methods from remote sensing images. In this paper, a combined method based on Mask, principal component analysis (PCA) and support vector machine method (SVM) was used to extract alteration mineral information from Enhanced thematic mapper plus remote sensing data with limited spectral and spatial resolutions. First, a mask image of the remote sensing imagery was created to remove interference information such as vegetation, shadow and water. Then, PCA was employed to collect sample data relating to iron, argillic, and carbonatization alteration. Finally, SVM was used to deal with alteration anomaly and build a feature extraction model of high accuracy. The Mask-PCA-SVM model is used to extract alteration mineral information from remote sensing images of Hatu area, Xinjiang Uygur Autonomous Regions, China. The results show that the new methods proposed in this paper can coincide well with known deposits occurrences, rate reached 86.51%. While, the consistent rate with known deposits of the ratio model, PCA model and Spectral angle mapper model were only 3.37, 65.08 and 69.05% respectively. This suggests that the proposed model can find the actual distribution of mineral deposits more effectively by reducing interference to a greater degree.     

Meridional Motion and Reynolds Stress from Debrecen Photoheliographic Data

The Debrecen Photoheliographic Data catalogue is a continuation of the Greenwich Photoheliographic Results providing daily positions of sunspots and sunspot groups. We analyse the data for sunspot groups focussing on meridional motions and transfer of angular momentum towards the solar equator. Velocities are calculated with a daily shift method including an automatic iterative process of removing the outliers. Apart from the standard differential rotation profile, we find meridional motion directed towards the zone of solar activity. The difference in measured meridional flow in comparison to Doppler measurements and some other tracer measurements is interpreted as a consequence of different flow patterns inside and outside of active regions. We also find a statistically significant dependence of meridional motion on rotation velocity residuals confirming the transfer of angular momentum towards the equator. Analysis of horizontal Reynolds stress reveals that the transfer of angular momentum is stronger with increasing latitude up to about \(40^{\circ}\), where there is a possible maximum in absolute value.     

Land surface coupling in regional climate simulations of the West African monsoon

Coupling of the Community Land Model (CLM3) to the ICTP Regional Climate Model (RegCM3) substantially improves the simulation of mean climate over West Africa relative to an older version of RegCM3 coupled to the Biosphere Atmosphere Transfer Scheme (BATS). Two 10-year simulations (1992–2001) show that the seasonal timing and magnitude of mean monsoon precipitation more closely match observations when the new land surface scheme is implemented. Specifically, RegCM3–CLM3 improves the timing of the monsoon advance and retreat across the Guinean Coast, and reduces a positive precipitation bias in the Sahel and Northern Africa. As a result, simulated temperatures are higher, thereby reducing the negative temperature bias found in the Guinean Coast and Sahel in RegCM3–BATS. In the RegCM3–BATS simulation, warmer temperatures in northern latitudes and wetter soils near the coast create excessively strong temperature and moist static energy gradients, which shifts the African Easterly Jet further north than observed. In the RegCM3–CLM3 simulation, the migration and position of the African Easterly Jet more closely match reanalysis winds. This improvement is triggered by drier soil conditions in the RegCM3–CLM3 simulation and an increase in evapotranspiration per unit precipitation. These results indicate that atmosphere–land surface coupling has the ability to impact regional-scale circulation and precipitation in regions exhibiting strong hydroclimatic gradients.     

Altitudinal trends in δ<Superscript>13</Superscript>C value,stomatal density and nitrogen content of <Emphasis Type="Italic">Pinus tabuliformis</Emphasis> needles on the southern slope of the middle Qinling Mountains,China

In this study, a coniferous tree species (Pinus tabuliformis Carr.) was investigated at a moderate-altitude mountainous terrain on the southern slope of the middle Qinling Mountains (QLM) to detect the trends in carbon isotope ratio (δ¹³C), leaf nitrogen content (LNC) and stomatal density (SD) with altitude variation in north-subtropical humid mountain climate zone of China. The results showed that LNC and SD both significantly increased linearly along the altitudinal gradient ranging from 1000 to 2200 m, whereas leaf δ¹³C exhibited a significantly negative correlation with the altitude. Such a correlation pattern differs obviously from that obtained in offshore low-altitude humid environment or inland high-altitude semi-arid environment, suggesting that the pattern of increasing δ¹³C with the altitude cannot be generalized. The negative correlation between δ¹³C and altitude might be attributed mainly to the strengthening of carbon isotope fractionation in plants caused by increasing precipitation with altitude. Furthermore, there was a remarkable negative correlation between leaf δ¹³C and LNC. One possible reason was that increasing precipitation that operates to increase isotopic discrimination with altitude overtook the LNC in determining the sign of leaf δ¹³C. The significant negative correlation between leaf δ¹³C and SD over altitudes was also found in the present study, indicating that increases in SD with altitude would reduce, rather than enhance plant δ¹³C values.     

华北地台南缘燕山期板内花岗斑岩类地球化学特征及成分空间变化规律

华北地台南缘燕山期花岗斑岩类小岩体形成于大陆板内环境,它具有类似岛弧—活动大陆边缘钙碱系列岩石地球化学特征,其成分在空间上呈现极性特征。本文探讨了这种成分极性与中、新生代俯冲带花岗岩类的可比性,并根据锶、钕同位素资料揭示成岩物质的可能来源及造成成分空间变化的可能原因。