The eclogite-facies metasedimentary rocks in the Münchberg gneiss complex (T=630±30° C/P17–24 kbar) locally contain CO2–N2-rich fluid inclusions of extremely low molar volumes (32 cm3/mol) in quartz. These fluid compositions are mainly found in rocks intercalated with calcsilicate bands. Densities were determined from low-temperature phase transitions like stable or metastable homogenization (L+VL), partial homogenization (S+L+VS+L) and the transition S+LL (L = liquid, V = vapour, S = solid). The high fluid densities are in agreement with eclogite-facies pressure and temperature and subsequent amphibolite facies. CO2–N2 inclusions were not observed in adjacent eclogites nor in non-calcareous metasediments. These rock types contain predominantly H2O-rich inclusions correlating with amphibolite-facies conditions. The variation of fluid composition with lithological differences indicates local fluid gradients and speaks against a pervasive fluid flow during eclogite-facies metamorphism. 相似文献
The anodic and cathodic behaviour of pyrite with clay and different carbon coatings of activated carbon, graphite and carbonaceous matter in cyanide medium was investigated using the potentiodynamic method. The presence of clay coating did not change the polarisation curve appearance for either the anodic oxidation of pyrite or the cathodic reduction of oxygen or the potential of the current plateau, but only decreased the plateau current especially at a higher coating thickness. The presence of the carbon coatings marginally shifted the rest potential for pyrite to a more anodic position and slightly changed the polarisation curve appearance for pyrite oxidation. The current density for pyrite oxidation largely increased in the presence of the carbon coatings, the potential at the plateau shifted to more cathodic positions, and the plateau width became smaller. These effects became more noticeable at a higher coating thickness. The activated carbon, graphite and carbonaceous matter coatings performed similarly in affecting pyrite oxidation at a similar thickness. The carbon coatings significantly increased the limiting current densities for oxygen reduction on pyrite, and the limiting current plateau became steeper at a higher coating thickness. The carbon coatings increased the limiting current density for oxygen reduction to a similar extent at a low coating thickness, but increased to varied extents at a higher coating thickness. The carbon coatings also greatly increased the cathodic current density for gold reduction on pyrite. The enhancement of pyrite oxidation and oxygen or gold reduction on pyrite by the carbon coatings was likely attributed to the electrochemical interaction between pyrite and the carbon materials with electron-rich surfaces and high conductivity. The presence of the carbon coatings significantly increased the oxidation of pyrite in aerated cyanide solutions and the preg-robbing of pyrite especially at a higher coating thickness. 相似文献
Laboratory experiments were carried out to acquire more insight and understanding of the phenomena associated with the in-situ arsenic remediation. Visualization techniques are the most informative for the detection of Fe(II) while flowing in soils. Green Rust (GR) was considered as representative of in-situ iron precipitates. In a visualization flat cell, the change in color of GR to orange, due to oxidation, was monitored by a digital camera and the images were analyzed giving the spatial and temporal distribution of Fe(II). Moreover, both oxygen and pH changes in time were recorded in two sections along the flow direction in the cell. The measured and calculated concentration profiles were compared and the actual reaction rates were predicted. The reaction rate constants measured in this study, under flowing conditions, are in a good agreement with the values obtained from batch experiments reported in the literature. 相似文献
The characterisation of waste is entering a new phase with the latest developments of characterisation leaching tests and associated modelling capabilities. The currently applied too simple testing approaches lead to poor choices in waste management. With the increased insight in release controlling processes chemical speciation aspects can be addressed even in the most complex and heterogeneous waste materials. From a composition perspective materials may be highly variable, but often materials are far more consistent in their leaching behaviour. This aspect should be exploited more extensively as it holds the key to treat waste materials in such a way that long term solutions are achieved rather than reaching temporary gains. 相似文献
The choice of sampling method for soil solution is of great importance. In this paper soil solution chemistry sampled by centrifugation, two types of suction lysimeters and zero-tension lysimeters have been studied with the purpose of investigating systematic differences between them. The samples were taken at 4 depths from an acidified forest soil as well as from adjacent lime and ash treated soils. A centrifugation drainage method was compared with two types of suction lysimeters (‘Rhizon’ and ‘Prenart’) and zero-tension lysimeters. About half of the 27 variables measured showed a significant difference between the sampling methods used. Typically the centrifuged samples had lower pH (4.0 vs. 4.4), Ca (21 μM vs. 30 μM) and Mg (25 μM vs. 34 μM) concentrations and higher Cl (330 μM vs. 230 μM) and DOC (4.4 mM vs. 3.2 mM) concentrations than the Rhizon lysimeters. Also the other lysimeters showed significant differences compared to the centrifuged samples for about half the number of analytes. Centrifuged samples had higher concentrations of all analytes except NO3 and PO4 compared to zero-tension lysimeters and also for all analytes except NO3 and Al compared to Prenart lysimeters. Among the environmental factors considered depth showed an influence to some extent, while sampling occasion had a great significant impact on the difference between the centrifugation method and the Rhizon lysimeters. Factors like individual pits or soil treatment did not show any influence on the difference between the methods. 相似文献
Precambrian fluvial systems, lacking the influence of rooted vegetation, probably were characterised by flashy surface runoff, low bank stability, broad channels with abundant bedload, and faster rates of channel migration; consequently, a braided fluvial style is generally accepted. Pre-vegetational braided river systems, active under highly variable palaeoclimatic conditions, may have been more widespread than are modern, ephemeral dry-land braided systems. Aeolian deflation of fine fluvial detritus does not appear to have been prevalent. With the onset of large cratons by the Neoarchaean–Palaeoproterozoic, very large, perennial braided river systems became typical. The c. 2.06–1.88 Ga Waterberg Group, preserved within a Main and a smaller Middelburg basin on the Kaapvaal craton, was deposited largely by alluvial/braided-fluvial and subordinate palaeo-desert environments, within fault-bounded, possibly pull-apart type depositories.
Palaeohydrological data obtained from earlier work in the Middelburg basin (Wilgerivier Formation) are compared to such data derived from the correlated Blouberg Formation, situated along the NE margin of the Main basin. Within the preserved Blouberg depository, palaeohydrological parameters estimated from clast size and cross-bed set thickness data, exhibit rational changes in their values, either in a down-palaeocurrent direction, or from inferred basin margin to palaeo-basin centre. In both the Wilgerivier and Blouberg Formations, calculated palaeoslope values (derived from two separate formulae) plot within the gap separating typical alluvial fan gradients from those which characterise rivers (cf. [Blair, T.C., McPherson, J.G., 1994. Alluvial fans and their natural distinction from rivers based on morphology, hydraulic processes, sedimentary processes, and facies assemblages. J. Sediment. Res. A64, 450–489.]). Although it may be argued that such data support possibly unique fluvial styles within the Precambrian, perhaps related to a combination of major global-scale tectono-thermal and atmospheric–palaeoclimatic events, a simpler explanation of these apparently enigmatic palaeoslope values may be pertinent. Of the two possible palaeohydrological formulae for calculating palaeoslope, one provides results close to typical fluvial gradients; the other formula relies on preserved channel-width data. We suggest that the latter will not be reliable due to problematic preservation of original channel-widths within an active braided fluvial system. We thus find no unequivocal support for a unique fluvial style for the Precambrian, beyond that generally accepted for that period and discussed briefly in the first paragraph. 相似文献
A decision support system (DSS) has been developed to assist expert and non-expert users in the evaluation and selection of
eco-engineering strategies for slope protection. This DSS combines a qualitative hazard assessment of erosion and mass movements
with a detailed catalogue of eco-engineering strategies for slope protection of which the suitability is evaluated in relation
to the data entered. The slope decision support system (SDSS) is a knowledge based DSS in which knowledge is stored in frames
containing rules that can evaluate the available information for a project, stored as project specific information (PSI) in
a data file. The advantages of such a system are that it accepts incomplete information and that the qualitative nature of
the information does not instil the user with a sense of unjustified exactitude. By its multidisciplinary and progressive
nature, the DSS will be of value during the initial stages of an eco-engineering project when data collection and the potential
of different eco-engineering strategies are considered. The accent of the output of the DSS is on the application of eco-engineering
strategies for slope protection as an environmentally-friendly solution aiding sustainable development. For its acceptance
within the engineering community, the DSS needs to prove its predictive capacity. Therefore, its performance has been benchmarked
against successful and unsuccessful cases of slope stabilisation using eco-engineering. The target audience and the areas
of application of this DSS are reviewed and the strategies for further development in this area suggested. 相似文献
Many Precambrian granulite-facies metamorphic complexes contain so-called straight gneisses, which are massive rocks with a clearly pronounced blastomylonitic texture, lineation, and gneissosity. These rocks occur exclusively in high-temperature ductile shear zones, which can develop either during the primary exhumation of rock complexes or during the overprinting by high-temperature dynamometamorphism. The main criterion for distinguishing between these two types of straight gneisses is the configuration of their P-T trajectories, which are recorded in the mineral assemblages in these rocks and their host gneisses. Ductile shear zones developed in Archean granulite gneisses simultaneously with their exhumation, and, hence, their P-T trajectories are segments of decompression and/or isobaric cooling paths. Straight gneisses in Proterozoic polymetamorphic complexes commonly compose high-temperature ductile shear zones overprinted on Archean granulite complexes, and the P-T paths of these rocks are Z-shaped. This means that, at a constant pressure in the middle part of the continental crust, the Tmin of the older P-T trajectory corresponded to Tmax of the younger trajectory, and often Tmax–Tmin > 100°C. Such ductile shear zones commonly have a strike-slip morphology and can be easily seen in aerial photographs and discerned during structural geological surveying. These zones can overprint older gneisses without any notable thermal effect on the latter. Relations of this type were identified in the granulite complexes of Limpopo in South Africa, Sharyzhalgai in the southwestern Baikal area, and Lapland in the Kola Peninsula. The results of our research propose a solution for the well-known problem of the significant discrepancies between the isotopic ages in high-temperature-high-pressure complexes and the partial or complete distortion of radiogenic isotopic systems under the effect of a newly inflowing metamorphic fluid. The application of geochronologic techniques to these situations is senseless, and only P-T trajectories provide insight into the actual age relations between the discrete tectono-metamorphic stages. It is thus expedient to conduct not only structural studies of metamorphic complexes but also their detailed petrological examination and the calculation of their P-T paths before geochronologic dating. 相似文献
This article discusses the involvement of older women and men in voluntary work in rural communities in the Netherlands. Gender,
ageing and civil society form the core concepts in the article. Politicians and policy makers in the Netherlands are worried
about the perceived decline of civil society and about the consequences of this decline for specific categories of older women
in terms of well-being and social exclusion. The paper presents the results of two surveys of involvement of older women and
men in civic organisations, voluntary work and local actions. The surveys indicate high levels of involvement of both women
and men. No gender differences are found in activity level. However, the data demonstrate the gendered nature of civil society.
Women are more engaged in informal voluntary work and informal local actions, while men are more active in formal organisations
and functions. This gender segmentation is not absolute, however. Many older women and men transgress the traditional feminine–masculine
boundaries. The surveys highlight the involvement of women and men in rural communities, but indicate lower activity levels
in urban areas. 相似文献