Analysis of burnt schist outcrops in the alps: Relation to historical archaeology and Hannibal's crossing in 218 B.C.

Identification of the exact route followed by Hannibal during his invasion of Italia in the Second Punic War is one of the major questions of antiquity and one that historians/archaeologists have long studied. One of the many clues in the ancient literature that can help answer this question is the mention of fired rock, the result of a conflagration Hannibal is reputed to have employed to reduce the size of boulders in a blocking rockslide some distance down from the high col on the Italian side. The only route with evidence of fired rock along the roadway leading into Italia follows the Col du Clapier, one of the possible northern routes discussed by historians. Radiocarbon dating of calcined rocks is not possible, but whereas Time‐of‐Flight Secondary Ion Mass Spectrometry (ToF‐SIMS), Field Emission Scanning Electron Microscope (FESEM‐EDS), backscatter electron scanning microscopy (BSE), High Resolution Transmission Electron Microscope (HRTEM), and Raman Spectroscopic data do not provide an age for the burnt rock, compositional evidence of the conflagration derived from these analyses may shed light on Hannibal's actual route. © 2007 Wiley Periodicals, Inc.     

Chicxulub impactites: Geochemical clues to the precursor rocks

Abstract— The 65 Ma Chicxulub impact structure, Mexico, with a diameter of ～180 km is the focus of geoscientific research because of its link to the mass extinction event at the Cretaceous‐Tertiary (K/T) boundary. Chicxulub, now buried beneath thick post‐impact sediments, is probably one of the best‐preserved terrestrial impact structures known. Because of its inaccessibility, only limited samples on the impact lithologies from a few drill cores are available. We report major element and Sr‐, Nd‐, O‐, and C‐isotopic data for Chicxulub impact‐melt lithologies and basement clasts in impact breccias of drill cores C‐1 and Y‐6, and for melt particles in the Chicxulub ejecta horizon at the K/T boundary in Beloc, Haiti. The melt lithologies with SiO₂ ranging from 58 to ～63 wt% show significant variations in the content of Al, Ca, and the alkalies. In the melt matrix samples, δ¹³C of the calcite is about ?3%o. The δ¹⁸O values for the siliceous melt matrices of Y‐6 samples range from 9.9 to 12.4%o. Melt lithologies and the black Haitian glass have rather uniform ⁸⁷Sr/⁸⁶Sr ratios (0.7079 to 0.7094); only one lithic fragment displays ⁸⁷Sr/⁸⁶Sr of 0.7141. The Sr model ages T^SrUR for most lithologies range from 830 to 1833 Ma; unrealistic negative model ages point to an open Rb‐Sr system with loss of Rb in a hydrothermal process. The ¹⁴³Nd/¹⁴⁴Nd ratios for all samples, except one basement clast with ¹⁴³Nd/¹⁴⁴Nd of 0.5121, cluster at 0.5123 to 0.5124. In an ?_Nd‐?_Sr diagram, impactites plot in a field delimited by ?_Nd of ?2 to ?6, and ?_Sr of 55 to 69. This field is not defined by the basement lithologies described to occur as lithic clasts in impact breccias and Cretaceous sediments. At least one additional intermediate to mafic precursor component is required to explain the data.     

Micro-environmental controls on biomineralization: superficial processes of apatite and calcite precipitation in Quaternary soils, Roussillon, France

Calcium hydroxyapatite and calcite precipitates around bacteria were observed in 2-week-old alluvial topsoil (Roussillon area, SE France). This observation prompted a laboratory study of Ca²⁺ and PO₄³⁻ incorporation into hydroxyapatite and Ca²⁺ into calcite mediated by bacteria using similar topsoil material, but free from apatite and calcite. Subsamples were prepared using three different grain sizes, and experiments were undertaken using sucrose and different contents of Ca²⁺ and PO₄³⁻. Mineralization experiments proceeded over 5 days. Calcium and PO₄³⁻ sorption onto clay influenced the Ca/P ratio in the solutions. Hydroxyapatite and calcite precipitation only occurred in unsterilized samples. The presence of clay minerals promoted biomineralization.     

The impact of high altitude aircraft on the ozone layer in the stratosphere

The paper discusses the potential effects on the ozone layer of gases released by the engines of proposed high altitude supersonic aircraft. The major problem arises from the emissions of nitrogen oxides which have the potential to destroy significant quantities of ozone in the stratosphere. The magnitude of the perturbation is highly dependent on the cruise altitude of the aircraft. Furthermore, the depletion of ozone is substantially reduced when heterogeneous conversion of nitrogen oxides into nitric acid on sulfate aerosol particles is taken into account in the calculation. The sensitivity of the aerosol load on stratospheric ozone is investigated. First, the model indicates that the aerosol load induced by the SO₂ released by aircraft is increased by about 10–20% above the background aerosols at mid-high latitude of the Northern Hemisphere at 15 km for the NASA emission scenario A (the NASA emission scenarios are explained in Tables I to III). This increase in aerosol has small effects on stratospheric ozone. Second, when the aerosol load is increased following a volcanic eruption similar to the eruption of El Chichon (Mexico, April 1982), the ozone column in spring increases by as much as 9% in response to the injection of NO _x from the aircraft with the NASA emission scenario A. Finally, the modeled suggests that significant ozone depletion could result from the formation of additional polar stratospheric clouds produced by the injection of H₂O and HNO₃ by the aircraft engines.     

The LMDZ4 general circulation model: climate performance and sensitivity to parametrized physics with emphasis on tropical convection

The LMDZ4 general circulation model is the atmospheric component of the IPSL–CM4 coupled model which has been used to perform climate change simulations for the 4th IPCC assessment report. The main aspects of the model climatology (forced by observed sea surface temperature) are documented here, as well as the major improvements with respect to the previous versions, which mainly come form the parametrization of tropical convection. A methodology is proposed to help analyse the sensitivity of the tropical Hadley–Walker circulation to the parametrization of cumulus convection and clouds. The tropical circulation is characterized using scalar potentials associated with the horizontal wind and horizontal transport of geopotential (the Laplacian of which is proportional to the total vertical momentum in the atmospheric column). The effect of parametrized physics is analysed in a regime sorted framework using the vertical velocity at 500 hPa as a proxy for large scale vertical motion. Compared to Tiedtke’s convection scheme, used in previous versions, the Emanuel’s scheme improves the representation of the Hadley–Walker circulation, with a relatively stronger and deeper large scale vertical ascent over tropical continents, and suppresses the marked patterns of concentrated rainfall over oceans. Thanks to the regime sorted analyses, these differences are attributed to intrinsic differences in the vertical distribution of convective heating, and to the lack of self-inhibition by precipitating downdraughts in Tiedtke’s parametrization. Both the convection and cloud schemes are shown to control the relative importance of large scale convection over land and ocean, an important point for the behaviour of the coupled model.     

Laboratory study of the rates and products of the phototransformations of naphthalene adsorbed on samples of titanium dioxide,ferric oxide,muscovite, and fly ash

The photodegradation of naphthalene (NPH), chosen as a model of polynuclear aromatic pollutants, has been studied in the presence of a layer of four water-insoluble inorganic solids which can be found in the troposphere (TiO₂, Fe₂O₃, muscovite, and a fly ash sample). Direct photolysis of NPH is negligible at >340 nm. Dark adsorption of NPH on TiO₂ (mainly anatase, nonporous, 50 m² g^–1) at 293 K corresponds to a surface coverage ofca. 50% at equilibrium. Under these conditions (saturated surface), the stationary-state photocatalytic degradation reaches 0.4 molecule nm^–2 h^–1 (>340 nm, radiant fluxca. 22 mW cm^–2). Dioxygen is required and its partial pressure in air is such that the degradation is zero order in O₂. Water vapor markedly increases the rate. The other particulates have also an effect, less important than that of TiO₂, however quite noticeable with respect to surface area unit for the fly ash sample which contains 3.2% Fe₂O₃. Apart from 1,4-naphthoquinone, which is the main intermediate product in all cases, 2-naphthol, phthalide, phthaldialdehyde, phthalic acid, acetophenone, benzaldehyde, benzoic acid are also formed on dry TiO₂. Depending on their volatility, these compounds are transferred to the gas phase or remain principally adsorbed on the solid particles where they are further transformed. For instance, phthalic acid (or anhydride) and benzoic acid are generated from 1,4-naphthoquinone. Degradation mechanisms are briefly discussed.     

A luminescence‐based chronology for the Harletz loess sequence,Bulgaria

The Harletz loess‐palaeosol sequence is located in northwestern Bulgaria and represents an important link between well‐studied loess sequences in eastern Romania and further sites to the west of the Carpathians (e.g. Serbia and Hungary). The aim of this study was to establish a chronostratigraphy of the deposits, using various methods of luminescence dating, together with basic stratigraphical field observations as well as magnetic properties. Luminescence dating was carried out using the quartz fine grain fraction and a SAR protocol, and the feldspar coarse grain fraction, applying the MET‐pIRIR protocol. Due to underestimation of the quartz fine grain fraction in the lower parts of the sequence, the resulting chronology is mainly based on the feldspar ages, which are derived from the stimulation temperature at 150 °C. A comparison with nearby sequences from Serbia, Hungary and Romania, and interpretations obtained through the stratigraphical and sedimentological signature of the sequence, supports the established chronology. Our data suggest that the prominent palaeosol (soil complex) in the upper quarter of the sequence was formed during MIS 5. It would follow that large parts of the Last Glacial loess overlying this palaeosol were probably eroded, and that the thick loess accumulation underlying this soil complex can be allocated to the penultimate glacial (MIS 6). A prominent MIS 6 tephra, which has been reported from other sequences in the area, is also present at Harletz.     

Late Miocene to Quaternary slip history across the Qiulitag anticline in the southern Tianshan piedmont

In this study, we reconstruct the Miocene to Quaternary shortening history across the Qiulitag anticline, a complex fault‐bend fold located in southern Tianshan. We studied the Yaha and Kuche sections, where we combined surface structural measurements and seismic imaging to model the stratigraphic horizons. The history of folding was reconstructed based on magnetostratigraphic analyses and eight cosmogenic burial ages in Kuche. Pleistocene deformation rates were also quantified in Yaha based on a deformed fluvial terrace that we dated to ~67 ka using a cosmogenic depth profile. Our results suggest that the fold grew at a mean slip rate of 0.9–1.3 mm/a in both sections but accelerated to ~2.5 mm/a during the Pleistocene in Kuche. These results support a migration of the deformation towards the basin during the Pleistocene and suggest that most of the present deformation in the Tianshan is accommodated across the external structures of the range.     

Performance of the Nuclear Compton Telescope

On 1 June 2005, the prototype Nuclear Compton Telescope (NCT) flew on a high altitude balloon from Fort Sumner, New Mexico. NCT is a balloon-borne soft γ-ray (0.2–10 MeV) telescope for studying astrophysical sources of nuclear line emission and γ-ray polarization. Our program is designed to develop and test technologies and analysis techniques crucial for the Advanced Compton Telescope; however, our detector design and configuration is also well matched to the focal plane requirements for focusing Laue lenses. The NCT prototype utilizes two, 3D imaging germanium detectors (GeDs) in a novel, ultra-compact design optimized for nuclear line emission in the 0.5–2 MeV range. Our prototype flight provides a critical test of the novel detector technologies, analysis techniques, and background rejection procedures developed for high resolution Compton telescopes.     

The palaeomagnetism and magnetic fabric of cave sediments from Grønligrotta and Jordbrugrotta, Norway

Summary. Twenty-four oriented specimens of laminated clay were obtained from vertical sections in two caves in northern Norway. Studies of the magnetic remanence and susceptibility anisotropy show that the magnetization is depositional in origin and due to magnetite. The palaeomagnetic record in one section is correlated with results from a Swiss lake sediment core to suggest an age of 9600–6800 yr bp for the cave clay. It is shown that the susceptibility lineation produced on gently sloping surfaces was predominantly controlled by gravity and cannot therefore be used directly to estimate the palaeoflow or palaeofield directions.