The junction of Fensch and Moselle rivers,France; mineralogy and composition of river materials

The Moselle river flows in the north-east of France, from Vosges Mountains to neighboring countries Luxembourg and Germany. One of its tributaries, the Fensch river, drains a highly industrialized watershed, strongly impacted by mining, smelting and surfacing activities. The objective of this work, part of a general research program on Moselle watershed (Zone Atelier Moselle) was to assess the impact of the polluted Fensch river on the global quality of the Moselle river. For that purpose, water, sediments and suspended particulate matter were sampled in both rivers, upstream and downstream the junction. Four main sampling campaigns were carried out, in winter during a flood event and in spring at low water level. On a first step, mineralogical analyses (XRD and FTIR) and chemical analyses (ICP-MS, ICP-AES), were performed on sediments, suspended particulate matters and filtered waters. Major and trace elements concentrations were obtained on two different granulometric fractions (0–2 mm and 0–50 μm) revealing the enrichment in heavy metals of fine particles. From one collecting campaign to another, seasonal variations could be evidenced on suspended matter composition even though major minerals (calcite, quartz and kaolinite) were always present. Furthermore, spatial variations were evidenced for Fensch and Moselle downstream sediments. Thus, very fine-grained sediments, poorly crystallized, displaying at the same time higher metal concentrations and higher organic matter content than in Fensch river material, were collected downstream, in a low hydrodynamic conditions zone, assumed as a preferential sedimentary zone or even as a placer. Strong correlations could be revealed between iron content and contaminant concentrations, confirming the origin of polluted material.     

Petrology and geochemistry of a diamondiferous lherzolite from the Premier diamond mine, South Africa

This paper reports on the petrology and geochemistry of a diamondiferous peridotite xenolith from the Premier diamond mine in South Africa.

The xenolith is altered with pervasive serpentinisation of olivine and orthopyroxene. Garnets are in an advanced state of kelyphitisation but partly fresh. Electron microprobe analyses of the garnets are consistent with a lherzolitic paragenesis (8.5 wt.% Cr₂O₃ and 6.6 wt.% CaO). The garnets show limited variation in trace element composition, with generally low concentrations of most trace elements, e.g. Y (<11 ppm), Zr (<18 ppm) and Sr (<0.5 ppm). Garnet rare earth element concentrations, when normalised against the C1 chondrite of McDonough and Sun (Chem. Geol. 120 (1995) 223), are characterised by a rare earth element pattern similar to garnet from fertile lherzolite.

All diamonds recovered are colourless. Most crystals are sharp-edged octahedra, some with minor development of the dodecahedral form. A number of crystals are twinned octahedral macles, while aggregates of two or more octahedra are also common. Mineral inclusions are rare. Where present they are predominantly small black rosettes believed to consist of sulfide. In one instance a polymineralic (presumably lherzolitic) assemblage of reddish garnet, green clinopyroxene and a colourless mineral is recognised.

Infrared analysis of the xenolith diamonds show nitrogen contents generally lower than 500 ppm and variable nitrogen aggregation state, from 20% to 80% of the ‘B’ form. When plotted on a nitrogen aggregation diagram a well defined trend of increasing nitrogen aggregation state with increasing nitrogen content is observed. Carbon isotopic compositions range from −3.6 ‰ to −1.3 ‰. These are broadly correlated with diamond nitrogen content as determined by infrared spectroscopy, with the most negative C-isotopic compositions correlating with the lowest nitrogen contents.

Xenolith mantle equilibration temperatures, calculated from nitrogen aggregation systematics as well as the Ni in garnet thermometer are on the order of 1100 to 1200 °C.

It is concluded that the xenolith is a fertile lherzolite, and that the lherzolitic character may have resulted from the total metasomatic overprinting of pre-existing harzburgite. Metasomatism occurred prior to, or accompanied, diamond growth.     

Energy budget for the Sahel surface layer during the ECLATS experiment

The measurements obtained during the ECLATS experiment were used in order to determine the surface energy budget of the Sahel region (Niamey, Niger). This expedition was carried out from November 15 to December 10, 1980, during the dry period. Some data were collected by an instrumented aircraft, from which the turbulent fluxes were obtained in the boundary layer around midday; data were also collected at a surface station in order to estimate the surface energy budget continuously by the profile method. The aircraft measurements show the homogeneity of the vertical fluxes over large areas, allowing generalization to the bushy steppe of the Sahel region. The mean diurnal cycle of the energy budget is characterized by high values of ground heat flux and weak values of latent heat flux (deduced from the balance of the energy budget). This cycle is compared with that of the Koorin expedition, performed in similar conditions (tropical savanna in the dry period). We compare the three midday budgets: during Koorin; during ECLATS, at the ground station, and with the aircraft. The important differences that appear in the net radiative flux are explained by the difference in surface albedo.Ecole des Sciences, Université de Niamey, B.P. 10662 Niamey, Niger.     

Testing resilience thinking in a poverty context: Experience from the Niger River basin

Resilience thinking is an important addition to the range of frameworks and approaches that can be used to understand and manage complex social–ecological systems like small-scale fisheries. However, it is yet to lead to better environmental or development outcomes for fisheries stakeholders in terms of food security, improved livelihoods and ecological sustainability. This paper takes an empirical approach by focusing on the fundamentals of resilience thinking to evaluate its usefulness in developing relevant management interventions in small-scale fisheries in the Niger River Basin in West Africa. The paper presents the outputs of a participatory assessment exercise where both fishery communities and local experts were involved at two different scales. The resilience frame used was designed to facilitate the identification of socially defined thresholds that help delineate the desirability of the current system configuration and provides a diagnosis framework that tailors management solutions to problems in local context. The analysis highlights some key contributions from resilience thinking to the challenge of diagnosis in small-scale fisheries management in developing countries, as well as important contributions that emerge from taking a pragmatic and critical approach to its application.     

Laboratory study of the rates and products of the phototransformations of naphthalene adsorbed on samples of titanium dioxide,ferric oxide,muscovite, and fly ash

The photodegradation of naphthalene (NPH), chosen as a model of polynuclear aromatic pollutants, has been studied in the presence of a layer of four water-insoluble inorganic solids which can be found in the troposphere (TiO₂, Fe₂O₃, muscovite, and a fly ash sample). Direct photolysis of NPH is negligible at >340 nm. Dark adsorption of NPH on TiO₂ (mainly anatase, nonporous, 50 m² g^–1) at 293 K corresponds to a surface coverage ofca. 50% at equilibrium. Under these conditions (saturated surface), the stationary-state photocatalytic degradation reaches 0.4 molecule nm^–2 h^–1 (>340 nm, radiant fluxca. 22 mW cm^–2). Dioxygen is required and its partial pressure in air is such that the degradation is zero order in O₂. Water vapor markedly increases the rate. The other particulates have also an effect, less important than that of TiO₂, however quite noticeable with respect to surface area unit for the fly ash sample which contains 3.2% Fe₂O₃. Apart from 1,4-naphthoquinone, which is the main intermediate product in all cases, 2-naphthol, phthalide, phthaldialdehyde, phthalic acid, acetophenone, benzaldehyde, benzoic acid are also formed on dry TiO₂. Depending on their volatility, these compounds are transferred to the gas phase or remain principally adsorbed on the solid particles where they are further transformed. For instance, phthalic acid (or anhydride) and benzoic acid are generated from 1,4-naphthoquinone. Degradation mechanisms are briefly discussed.     

Topographic effects on solitary Rossby waves

The model for baroclinic solitary waves previously described by Flierl is developed to include effects of bottom variations.Topographic disturbances are shown to act, through their first and second derivatives, on both the phase speed correction and the maximum horizontal amplitude.The combined effects of mean shear flow steepening and bottom variations are considered; an equation is derived, showing the relative importance of each effect.     

Influence d'un changement climatique dû à une hausse de gaz à effet de serre sur l'agriculture au quebec

Abstract

This study, using a climate change scenario generated by the Canadian Climate Centre (CCC) general circulation model (GCM) examines the impacts of such a climate change on agriculture in southern Quebec. Using a crop model from the Food and Agriculture Organization (FAO), yield responses of a variety of cereals, legumes, oleaginous and special crops to climate change are analysed and discussed.

Results show that under the 2 × CO₂ climate scenario the growing season would be longer and accumulation of corn heat units and growing degree days would be more important than under actual climate (1961–1990). One of the more important results of this study is that, on the one hand yield of C₃ cereals would be lower and that of C₄ cereals higher in most agricultural regions. On the other hand, the direct fertilisation effect of increased CO₂ is not considered. It must be cautioned however that we can not generalise results obtained for one legume crop to all legumes.     

Amazon forest biomass density maps: tackling the uncertainty in carbon emission estimates

As land use change (LUC), including deforestation, is a patchy process, estimating the impact of LUC on carbon emissions requires spatially accurate underlying data on biomass distribution and change. The methods currently adopted to estimate the spatial variation of above- and below-ground biomass in tropical forests, in particular the Brazilian Amazon, are usually based on remote sensing analyses coupled with field datasets, which tend to be relatively scarce and often limited in their spatial distribution. There are notable differences among the resulting biomass maps found in the literature. These differences subsequently result in relatively high uncertainties in the carbon emissions calculated from land use change, and have a larger impact when biomass maps are coded into biomass classes referring to specific ranges of biomass values. In this paper we analyze the differences among recently-published biomass maps of the Amazon region, including the official information used by the Brazilian government for its communication to the United Nation Framework on Climate Change Convention of the United Nations. The estimated average pre-deforestation biomass in the four maps, for the areas of the Amazon region that had been deforested during the 1990–2009 period, varied from 205?±?32 Mg ha^?1 during 1990–1999, to 216?±?31 Mg ha^?1 during 2000–2009. The biomass values of the deforested areas in 2011 were between 7 and 24 % higher than for the average deforested areas during 1990–1999, suggesting that although there was variation in the mean value, deforestation was tending to occur in increasingly carbon-dense areas, with consequences for carbon emissions. To summarize, our key findings were: (i) the current maps of Amazonian biomass show substantial variation in both total biomass and its spatial distribution; (ii) carbon emissions estimates from deforestation are highly dependent on the spatial distribution of biomass as determined by any single biomass map, and on the deforestation process itself; (iii) future deforestation in the Brazilian Amazon is likely to affect forests with higher biomass than those deforested in the past, resulting in smaller reductions in carbon dioxide emissions than expected purely from the recent reductions in deforestation rates; and (iv) the current official estimate of carbon emissions from Amazonian deforestation is probably overestimated, because the recent loss of higher-biomass forests has not been taken into account.     

Application of trichloroacetic acid (TCA) to extraction of soft body for the determination of tissue Cd, Cu, Pb and Zn in the prosobranch Hydrobia ulvae (Pennant)

The application of trichloroacetic acid (TCA) as a shell extractant for preparation of soft body parts with reference to tissue metal concentrations (Cd, Cu, Pb, Zn) in shellfish has been evaluated on the example of the mud snail Hydrobia ulvae, a small marine prosobranch densely present in rocky and soft-bottom habitats of the eastern Atlantic. A solution of 0.1 M TCA was tested on individuals treated according to two different protocols: (1) thawed after freezing ("non-dried") and (2) thawed and air-dried to a constant weight ("dried"). Two points were investigated in detail to improve the method: individual soft tissue dry weight and tissue metal concentration following a standard digestion method. In both instances, the results were compared with those from manually dissected snails. Conditions for total shell decalcification of 60 individuals (3-4 mm long) were 5.5 h in 20 ml of 0.1 M TCA.No differences in individual soft tissue weight were observed between the treatments, indicating good efficiency of the TCA extraction with respect to weight of soft body parts. In contrast, tissue metal concentrations varied among treatments. The TCA extraction of the dried animals had a good recovery for Cd, most likely due to the lower solubility of Cd vital cellular components (proteins and mineral concretions) from the dried tissue. Satisfactory recoveries of the tissue concentrations of Cu and Pb were obtained for the non-dried individuals. This might be related to the specific distribution of metals in the organism (namely in the digestive glands and gonads) and their different chemical reactivity with TCA after the tissue was dried. Limited susceptibility of Zn-bearing protein bindings to complexing with TCA also accounts for significantly lower concentrations of Zn in the mud snail's soft tissue that was extracted. The 0.1 M TCA solution is therefore recommended for extraction of the shells of Hydrobia ulvae for tissue determination of Cd, Cu and Pb; however the treatment protocol does affect metal recovery and thus a consistent procedure should be followed.The extracted metals from the soft tissues and shells of the mud snails (on the basis of both metal concentrations and contents) were ranked in order of increasing contribution of soft body parts to the total (shell+tissue): Pb相似文献