A recent history of science cases for optical interferometry

Optical long-baseline interferometry is a unique and powerful technique for astronomical research. Since the 1980’s (with I2T, GI2T, Mark I to III, SUSI, ...), optical interferometers have produced an increasing number of scientific papers covering various fields of astrophysics. As current interferometric facilities are reaching their maturity, we take the opportunity in this paper to summarize the conclusions of a few key meetings, workshops, and conferences dedicated to interferometry. We present the most persistent recommendations related to science cases and discuss some key technological developments required to address them. In the era of extremely large telescopes, optical long-baseline interferometers will remain crucial to probe the smallest spatial scales and make breakthrough discoveries.     

Oxygen and carbon isotope ratios in the martian atmosphere

Oxygen and carbon isotope ratios in the martian CO₂ are key values to study evolution of volatiles on Mars. The major problems in spectroscopic determinations of these ratios on Mars are uncertainties associated with: (1) equivalent widths of the observed absorption lines, (2) line strengths in spectroscopic databases, and (3) thermal structure of the martian atmosphere during the observation. We have made special efforts to reduce all these uncertainties. We observed Mars using the Fourier Transform Spectrometer at the Canada–France–Hawaii Telescope. While the oxygen and carbon isotope ratios on Mars were byproducts in the previous observations, our observation was specifically aimed at these isotope ratios. We covered a range of 6022 to 6308 cm⁻¹ with the highest resolving power of ν/δν=3.5×10⁵ and a signal-to-noise ratio of 180 in the middle of the spectrum. The chosen spectral range involves 475 lines of the main isotope, 184 lines of ¹³CO₂, 181 lines of CO¹⁸O, and 119 lines of CO¹⁷O. (Lines with strengths exceeding 10⁻²⁷ cm at 218 K are considered here.) Due to the high spectral resolution, most of the lines are not blended. Uncertainties of retrieved isotope abundances are in inverse proportion to resolving power, signal-to-noise ratio, and square root of the number of lines. Laboratory studies of the CO₂ isotope spectra in the range of our observation achieved an accuracy of 1% in the line strengths. Detailed observations of temperature profiles using MGS/TES and data on temperature variations with local time from two GCMs are used to simulate each absorption line at various heights in each part of the instrument field of view and then sum up the results. Thermal radiation of Mars' surface and atmosphere is negligible in the chosen spectral range, and this reduces errors associated with uncertainties in the thermal structure on Mars. Using a combination of all these factors, the highest accuracy has been achieved in measuring the CO₂ isotope ratios: ¹³C/¹²C = 0.978 ± 0.020 and ¹⁸O/¹⁶O = 1.018 ± 0.018 times the terrestrial standards. Heavy isotopes in the atmosphere are enriched by nonthermal escape and sputtering, and depleted by fractionation with solid-phase reservoirs. The retrieved ratios show that isotope fractionation between CO₂ and oxygen and carbon reservoirs in the solid phase is almost balanced by nonthermal escape and sputtering of O and C from Mars.     

Morphological similarities between DBM and a microeconomic model of sprawl

We present a model that simulates the growth of a metropolitan area on a 2D lattice. The model is dynamic and based on microeconomics. Households show preferences for nearby open spaces and neighbourhood density. They compete on the land market. They travel along a road network to access the CBD. A planner ensures the connectedness and maintenance of the road network. The spatial pattern of houses, green spaces and road network self-organises, emerging from agents individualistic decisions. We perform several simulations and vary residential preferences. Our results show morphologies and transition phases that are similar to Dieletric Breakdown Models (DBM). Such similarities were observed earlier by other authors, but we show here that it can be deducted from the functioning of the land market and thus explicitly connected to urban economic theory.     

Evaluating flash-flood warnings at ungauged locations using post-event surveys: a case study with the AIGA warning system

Abstract

This article presents a comparison between real-time discharges calculated by a flash-flood warning system and post-event flood peak estimates. The studied event occurred on 15 and 16 June 2010 at the Argens catchment located in the south of France. Real-time flood warnings were provided by the AIGA (Adaptation d’Information Géographique pour l’Alerte en Crue) warning system, which is based on a simple distributed hydrological model run at a 1-km² resolution using radar rainfall information. The timing of the warnings (updated every 15 min) was compared to the observed flood impacts. Furthermore, “consolidated” flood peaks estimated by an intensive post-event survey were used to evaluate the AIGA-estimated peak discharges. The results indicated that the AIGA warnings clearly identified the most affected areas. However, the effective lead-time of the event detection was short, especially for fast-response catchments, because the current method does not take into account any rainfall forecast. The flood peak analysis showed a relatively good correspondence between AIGA- and field-estimated peak values, although some differences were due to the rainfall underestimation by the radar and rainfall–runoff model limitations.

Editor Z.W. Kundzewicz; Guest editor R.J. Moore

Citation Javelle, P., Demargne, J., Defrance, D., Pansu, J. and Arnaud, P., 2014. Evaluating flash-flood warnings at ungauged locations using post-event surveys: a case study with the AIGA warning system. Hydrological Sciences Journal, 59 (7), 1390–1402. http://dx.doi.org/10.1080/02626667.2014.923970     

Low-degree partial melting trends recorded in upper mantle minerals

The study of glass inclusions inside mantle minerals provides direct information about the chemistry of naturally occurring mantle-derived melts and the fine-scale complexity of the melting process responsible for their genesis. Minerals in a spinel lherzolite nodule from Grande Comore island contain glass inclusions which, after homogenization by heating, exhibit a continuous suite of chemical compositions clearly distinct from that of the host basanitic lava. The compositions range from silicic, with nepheline–olivine normative, 64 wt% SiO₂ and 11 wt% alkali oxides, to almost basaltic, with quartz normative, 50 wt% SiO₂ and 1–2 wt% alkali oxides. Within a single mineral phase, olivine, the inferred primary melt composition varies from 54 to 64 wt% SiO₂ for MgO content ranging from 8 to 0.8 wt%. An experimental study of the glass and fluid inclusions indicates that trapped melts represent liquids that are in equilibrium with their host phases at moderate temperature and pressure (T≈1230°C and P≈1.0 Gpa for melts trapped in olivine). Quantitative modelling of the compositional trends defined in the suite shows that all of the glasses are part of a cogenetic set of melts formed by fractional melting of spinel lherzolite, with F varying between 0.2 and 5%. The initial highly silicic, alkali-rich melts preserved in Mg-rich olivine become richer in FeO, MgO, CaO and Cr₂O₃ and poorer in SiO₂, K₂O, Na₂O, Al₂O₃ and Cl with increasing melt fractions, evolving toward the basaltic melts found in clinopyroxene. These results confirm the connection between glass inclusions inside mantle minerals and partial mantle melts, and indicate that primary melts with SiO₂ >60 wt%, alkali oxides >11%, FeO <1 wt% and MgO <1 wt% are generated during incipient melting of spinel peridotite. The composition of the primary melts is inferred to be dependent on pressure, and to reflect both the speciation of dissolved CO₂ and the effect of alkali oxides on the silica activity coefficient in the melt. At pressures around 1 GPa, low-degree melts are characterized by alkali and silica-rich compositions, with a limited effect of dissolved CO₂ and a decreased silica activity coefficient caused by the presence of alkali oxides, whereas at higher pressures alkali oxides form complexes with carbonates and, consequently, alkali-rich silica-poor melts will be generated.     

Deposition and fate of reactive Fe,Mn, P,and C in suspended particulate matter in the Bay of Biscay

Hydrographic structure of the water column, dissolved nutrient concentrations and the distribution of suspended particulate matter were recorded from CDT measurements and Niskin bottles sampling on the continental slope of the Bay of Biscay and on the axis of Capbreton canyon. Ascorbate extraction was applied here for the first time on marine suspended particles to determine the content of reactive Fe- and Mn-oxides, and P associated with Fe-oxides. Hydrographic structure of the south-eastern part of the Bay of Biscay did not change during the last three decades. Particulate organic carbon (POC) contents dropped strongly with depth, showing that organic matter mineralization was efficient in the water column. Organic matter mineralized in the water column had a Redfield N:P ratio. POC percent of particles collected at depth were higher during a bloom period, suggesting that some new organic matter reached the bottom. Contents of Fe and Mn extracted with the ascorbate leaching solution showed that suspended particles originated from the Gironde estuary, one of the major sources of particles in the Bay of Biscay. Intermediate and deeper nepheloid layers occurred in the Capbreton canyon. Particles of nepheloid layers were enriched in Mn- and Fe-oxides because they originated from resuspension of surface sediment.     

Time–frequency analysis to profile hydrological regimes: application to Haiti

Abstract

Comprehensive characterization of its flow rates is prerequisite to a proper understanding and water management of a given hydrological region. Several studies question the soundness of stationarity in time series and suggest the need for a quantification of the events and non-stationary features in flow rate time series. In this study, we combine statistical and time–frequency (TF) analyses to characterize and classify the flow rates of an understudied region, namely Haiti. Wavelet transforms and cyclostationarity analyses were combined with principal component analysis and hierarchical clustering to identify three groups of hydrological regimes in the country, suggesting similar management: (1) relatively stable flow rates with TF behaviour; (2) periodic and strongly seasonal flow rates; and (3) unstable flow rates. We argue that the TF methodology can yield additional information in regard to flow events and multiscale behaviour, even for short records. Flow rate characterization would benefit from the exhaustive approach described here.

EDITOR Z.W. Kundzewicz ASSOCIATE EDITOR E. Toth     

The hydrogen balmer lines and the structure of the quiet solar chromosphere

Spectra of Hα, Hβ and Hδ have been taken under good seeing conditions with the vacuum tower telescope of Sacramento Peak Observatory. Intensity curves are given at various wavelengths in these lines to permit further comparison with a theoretical model. Moreover, considering in each case the range of height in which the lines are almost optically thin and using a few approximations, the following results are derived: between 2000 and 6000 km above the limb the average thermal + turbulent velocity of the atoms is found to increase from 20 km s^?1 to 30 km s^?1 and the mean number of hydrogen atoms per cm³ in level 2 is given by $$\log n_2 {\text{ = }}4.5{\text{ }} - {\text{ 0}}{\text{.00056(}}z - 2000)$$ z being the altitude above the limb in km. For line profile computations a new interpolation formula is presented; it gives good profiles with a small number of scans, saving microphotometer time.     

Chicxulub impactites: Geochemical clues to the precursor rocks

Abstract— The 65 Ma Chicxulub impact structure, Mexico, with a diameter of ～180 km is the focus of geoscientific research because of its link to the mass extinction event at the Cretaceous‐Tertiary (K/T) boundary. Chicxulub, now buried beneath thick post‐impact sediments, is probably one of the best‐preserved terrestrial impact structures known. Because of its inaccessibility, only limited samples on the impact lithologies from a few drill cores are available. We report major element and Sr‐, Nd‐, O‐, and C‐isotopic data for Chicxulub impact‐melt lithologies and basement clasts in impact breccias of drill cores C‐1 and Y‐6, and for melt particles in the Chicxulub ejecta horizon at the K/T boundary in Beloc, Haiti. The melt lithologies with SiO₂ ranging from 58 to ～63 wt% show significant variations in the content of Al, Ca, and the alkalies. In the melt matrix samples, δ¹³C of the calcite is about ?3%o. The δ¹⁸O values for the siliceous melt matrices of Y‐6 samples range from 9.9 to 12.4%o. Melt lithologies and the black Haitian glass have rather uniform ⁸⁷Sr/⁸⁶Sr ratios (0.7079 to 0.7094); only one lithic fragment displays ⁸⁷Sr/⁸⁶Sr of 0.7141. The Sr model ages T^SrUR for most lithologies range from 830 to 1833 Ma; unrealistic negative model ages point to an open Rb‐Sr system with loss of Rb in a hydrothermal process. The ¹⁴³Nd/¹⁴⁴Nd ratios for all samples, except one basement clast with ¹⁴³Nd/¹⁴⁴Nd of 0.5121, cluster at 0.5123 to 0.5124. In an ?_Nd‐?_Sr diagram, impactites plot in a field delimited by ?_Nd of ?2 to ?6, and ?_Sr of 55 to 69. This field is not defined by the basement lithologies described to occur as lithic clasts in impact breccias and Cretaceous sediments. At least one additional intermediate to mafic precursor component is required to explain the data.