青藏高原典型地区的地貌量化分析——兼对高原“夷平面”的讨论

利用新近公布的SRTM数字高程模型(DEM),选取青藏高原北部及高原内、外流区域进行大尺度定量地貌分析。分析表明,青藏高原不同地区的地貌差异反映了它们在地貌演化上的阶段性。在高原北部的祁连山地区,局部地区绝对高程增加的同时,地势起伏反而变缓。这些地区水系的发育程度普遍较低,剥蚀物质往往只经过近距离的搬运仍滞留在逆冲褶皱带内,山间盆地和平地成为山间小河的侵蚀堆积基准,因此“削高填低”的过程有效地降低了局部地形起伏。高原平坦地势是伴随着造山过程及之后的高海拔侵蚀基准和内流型水系条件下“削高填低”剥蚀过程的结果。我们认为高原内部为现今仍在承受剥蚀的地势平坦面。它的形成具穿时性,是内流型水系河流下切侵蚀能力弱化的结果,不直接反映海拔的高低。如果平坦侵蚀面的形成与海拔高程无必然的关联,或侵蚀面可以在任何海拔高度形成,而不一定代表以海平面为基准的准平原,那么它就不能作为一个可靠的参照面用于直接示踪和约束高原的抬升量和抬升时间。     

Piping dynamics in mid‐altitude mountains under a temperate climate: Bieszczady Mountains,eastern Carpathians

Piping has been recognized as an important geomorphic, soil erosion and hydrologic process. It seems that it is far more widespread than it has often been supposed. However, our knowledge about piping dynamics and its quantification currently relies on a limited number of data for mainly loess‐derived areas and marl badlands. Therefore, this research aimed to recognize piping dynamics in mid‐altitude mountains under a temperate climate, where piping occurs in Cambisols, not previously considered as piping‐prone soils. It has been expressed by the estimation of erosion rates due to piping and elongation of pipes in the Bere?nica Wy?na catchment in the Bieszczady Mountains, eastern Carpathians (305 ha, 188 collapsed pipes). The research was based on the monitoring of selected piping systems (1971–1974, 2013–2016). Changes in soil loss vary significantly between different years (up to 27.36 t ha^?1 yr^?1), as well as between the mean short‐term erosion rate (up to 13.10 t ha^?1 yr^?1), and the long‐term (45 years) mean of 1.34 t ha^?1 yr^?1. The elongation of pipes also differs, from no changes to 36 m during one year. The mean total soil loss is 48.8 t ha^?1 in plots, whereas in the whole studied catchment it is 2.0 t ha^?1. Hence, piping is both spatially and temporally dependent. The magnitude of piping in the study area is at least three orders of magnitude higher than surface erosion rates (i.e. sheet and rill erosion) under similar land use (grasslands), and it is comparable to the magnitude of surface soil erosion on arable lands. It means that piping constitutes a significant environmental problem and, wherever it occurs, it is an important, or even the main, sediment source. Copyright © 2017 John Wiley & Sons, Ltd.     

Metal Ion Extraction with Bipyridine Derivatives as Chelating Ligands in Supercritical Carbon Dioxide

Three fluorinated bipyridine ligands have been designed and synthesized as chelating agents for the extraction of metal ions in supercritical CO₂ (sc‐CO₂). The ligand solubilities in sc‐CO₂ were investigated at different temperatures and pressures, and the measured data have been correlated using a semiempirical model. The calculated results showed satisfactory agreement with the experimental data. Based on these data, metal ion extraction with the three compounds as chelating agents in sc‐CO₂ was performed from spiked filter paper, whereby ligand 1 showed the highest extraction efficiency, especially for Ni²⁺ and Cu²⁺. The extraction constants, K_ex, of the three chelating ligands were seen to increase with increasing extraction efficiency for the same metal ion in the same extraction system.     

Normal fault growth influenced by basement fabrics: The importance of preferential nucleation from pre‐existing structures

Reactivation of pre‐existing intra‐basement structures can influence the evolution of rift basins, yet the detailed kinematic relationship between these structures and overlying rift‐related faults remains poorly understood. Understanding the kinematic as well as geometric relationship between intra‐basement structures and rift‐related fault networks is important, with the extension direction in many rifted provinces typically thought to lie normal to fault strike. We here investigate this problem using a borehole‐constrained, 3D seismic reflection dataset from the Taranaki Basin, offshore New Zealand. Excellent imaging of intra‐basement structures and a relatively weakly deformed, stratigraphically simple sedimentary cover allow us to: (a) identify a range of interaction styles between intra‐basement structures and overlying, Plio‐Pleistocene rift‐related normal faults; and (b) examine the cover fault kinematics associated with each interaction style. Some of the normal faults parallel and are physically connected to intra‐basement reflections, which are interpreted as mylonitic reverse faults formed during Mesozoic subduction and basement terrane accretion. These geometric relationships indicate pre‐existing intra‐basement structures locally controlled the position and attitude of Plio‐Pleistocene rift‐related normal faults. However, through detailed 3D kinematic analysis of selected normal faults, we show that: (a) normal faults only nucleated above intra‐basement structures that experienced late Miocene compressional reactivation, (b) despite playing an important role during subsequent rifting, intra‐basement structures have not been significantly extensionally reactivated, and (c) preferential nucleation and propagation of normal faults within late Miocene reverse faults and folds appears to be the key genetic relationship between contractionally reactivated intra‐basement structures and rift‐related normal faults. Our analysis shows that km‐scale, intra‐basement structures can control the nucleation and development of newly formed, rift‐related normal faults, most likely due to a local perturbation of the regional stress field. Because of this, simply inverting fault strike for causal extension direction may be incorrect, especially in provinces where pre‐existing, intra‐basement structures occur. We also show that a detailed kinematic analysis is key to deciphering the temporal as well as simply the spatial or geometric relationship between structures developed at multiple structural levels.     

Environmental factors influencing aggregation of manta rays (Manta birostris) off the northeastern coast of the Yucatan Peninsula

Manta rays inhabit tropical, subtropical and temperate waters. Aggregation sites of manta rays have been recognized worldwide, but the reasons for this behavior are still poorly understood. This study describes environmental factors influencing aggregation sites of the giant manta ray (Manta birostris) off the northeastern coast of the Yucatan Peninsula. Observations of manta rays were obtained from scientific surveys conducted during 2006–2011. Environmental data were obtained from satellite imagery. The maximum entropy (Maxent) method for habitat modeling was used to determine the effects of environmental conditions on the species and predict suitable habitat for manta rays in this region. Primary productivity and distance to the coast were the most influential variables, suggesting that aggregation occurs in highly productive coastal waters. The distribution of manta rays predicted by the Maxent model showed that the most suitable habitat within the study area is located off the northeastern coast of the Yucatán Peninsula, more precisely, northeast of Isla Holbox and northwest of Isla Contoy. Seasonal patterns of distribution suggest that the most suitable conditions are present from July through September.     

A comparison of growth patterns between non‐indigenous Halophila nipponica and the native sympatric Zostera marina on the southern coast of the Korean peninsula

The growth dynamics of two co‐occurring seagrass species, Zostera marina and Halophila nipponica, were examined on the southern coast of the Korean peninsula. Zostera marina is a native dominant seagrass species in Korean coastal waters, whereas H. nipponica is a non‐native tropical and subtropical species that has extended its distributional range to the temperate coastal areas of Korea. To examine the differences in the growth dynamics of H. nipponica and Z.  marina, their morphology, density, productivity and biomass, as well as local environmental conditions, were monitored monthly from January 2008 to July 2009. Underwater irradiance at the study site was the highest in April 2009 and the lowest in January 2008. Water temperature ranged from 10.4°C in January 2009 to 24.8°C in September 2008. Significant differences in growth dynamics were observed between the species, due to the effect of water temperature at the study site. Density and areal productivity were the highest in April 2008 and June 2008, respectively, for Z.  marina but the highest in July 2008 for H. nipponica. Leaf size, shoot height and shoot weight were the highest in July 2008 for Z.  marina but the highest in August 2008 or September 2008 for H. nipponica. The productivity of both species was strongly correlated with water temperature at the study site. However, the productivity of these species was not strongly correlated with underwater irradiance or the nutrient availability of either the water column or sediment pore water. Zostera marina exhibited the ecological characteristics of a temperate seagrass, whereas H. nipponica retained the features of a subtropical/tropical seagrass, even after adapting to the temperate coastal waters of Korea.     

Small hypervelocity particles captured in aerogel collectors: Location,extraction, handling and storage

Abstract— It has now been about a decade since the first demonstrations that hypervelocity particles could be captured, partially intact, in aerogel collectors. But the initial promise of a bonanza of partially‐intact extraterrestrial particles, collected in space, has yet to materialize. One of the difficulties that investigators have encountered is that the location, extraction, handling and analysis of very small (10 μm and less) grains, which constitute the vast majority of the captured particles, is challenging and burdensome. Furthermore, current extraction techniques tend to be destructive over large areas of the collectors. Here we describe our efforts to alleviate some of these difficulties. We have learned how to rapidly and efficiently locate captured particles in aerogel collectors, using an automated microscopic scanning system originally developed for experimental nuclear astrophysics. We have learned how to precisely excavate small access tunnels and trenches using an automated micromanipulator and glass microneedles as tools. These excavations are only destructive to the collector in a very small area—this feature may be particularly important for excavations in the precious Stardust collectors. Using actuatable silicon microtweezers, we have learned how to extract and store “naked” particles—essentially free of aerogel—as small as 3 μm in size. We have also developed a technique for extracting particles, along with their terminal tracks, still embedded in small cubical aerogel blocks. We have developed a novel method for storing very small particles in etched nuclear tracks. We have applied these techniques to the extraction and storage of grains captured in aerogel collectors (Particle Impact Experiment, Orbital Debris Collector Experiment, Comet‐99) in low Earth orbit.     

Nonlinear earthquake analysis of high arch dam–water–foundation rock systems

A nonlinear finite element model for earthquake response analysis of arch dam–water–foundation rock systems is proposed in this paper. The model includes dynamic dam–water and dam–foundation rock interactions, the opening of contraction joints, the radiation damping of semi‐unbounded foundation rock, the compressibility of impounded water, and the upstream energy propagating along the semi‐unbounded reservoir. Meanwhile, a new equivalent force scheme is suggested to achieve free‐field input in the model. The effects of the earthquake input mechanism, joint opening, water compressibility, and radiation damping on the earthquake response of the Ertan arch dam (240 m high) in China are investigated using the proposed model. The results show that these factors significantly affect the earthquake response of the Ertan arch dam. Such factors should therefore be considered in the earthquake response analysis and earthquake safety evaluation of high arch dams. Copyright © 2011 John Wiley & Sons, Ltd.     

Glacial flood pulse effects on benthic fauna in equatorial high‐Andean streams

Equatorial glacier‐fed streams present unique hydraulic patterns when compared to glacier‐fed observed in temperate regions as the main variability in discharge occurs on a daily basis. To assess how benthic fauna respond to these specific hydraulic conditions, we investigated the relationships between flow regime, hydraulic conditions (boundary Reynolds number, Re*), and macroinvertebrate communities (taxon richness and abundance) in a tropical glacier‐fed stream located in the high Ecuadorian Andes (> 4000 m). Both physical and biotic variables were measured under four discharge conditions (base‐flow and glacial flood pulses of various intensities), at 30 random points, in two sites whose hydraulic conditions were representative to those found in other streams of the study catchment. While daily glacial flood pulses significantly increased hydraulic stress in the benthic habitats (appearance of Re* > 2000), low stress areas still persisted even during extreme flood events (Re* < 500). In contrast to previous research in temperate glacier‐fed streams, taxon richness and abundance were not significantly affected by changes in hydraulic conditions induced by daily glacial flood pulses. However, we found that a few rare taxa, in particular rare ones, preferentially occurred in highly stressed hydraulic habitats. Monte‐Carlo simulations of benthic communities under glacial flood reduction scenarios predicted that taxon richness would be significantly reduced by the loss of high hydraulic stress habitats following glacier shrinking. This pioneer study on the relationship between hydraulic conditions and benthic diversity in an equatorial glacial stream evidenced unknown effects of climate change on singular yet endangered aquatic systems. Copyright © 2013 John Wiley & Sons, Ltd.     

Carbon isotope fractionation between graphite and diamond during shock experiments

Abstract— Carbon isotopic compositions were measured for shock‐produced diamond and shocked graphite formed at peak pressures ranging from 37 to 52 GPa. The δ¹³C values of diamonds produced in a sealed container were generally lower than that of the initial graphite. The differences in the carbon isotopic composition between initial graphite and shocked graphite/diamond may reflect kinetic isotopic fractionation during the oxidation of the graphite/diamond and/or analytical artifacts possibly induced by impurities in the samples. The pressure effect on the isotopic fractionations between graphite and diamond can be estimated from the δ¹³C values of impurity‐free diamonds produced using a vented container from which gases, including oxygen, in pore spaces escaped during or after the diamond formation (e.g., 0.039 ± 0.085‰ at a peak pressure of 52 GPa). Any isotopic fractionation induced by shock conversion of graphite to diamond is too small to be detected in natural shock‐induced diamond‐graphite systems related to terrestrial impact cratering processes.