Stability of sandy slopes under seepage conditions

Stability against shallow mass sliding in saturated sandy slopes under seepage depends on the flow direction and hydraulic gradient, particularly near the ground surface. Two modes of instability i.e., Coulomb sliding and liquefaction have been studied and the critical flow directions discussed. The utility of the numerical approach in solving complex flow problems with irregular boundaries and surface topography is demonstrated by means of two slope examples with different internal drainage conditions. The numerical results for the seepage gradients at different points are compared with those predicted by the simple expression derived in this study, and the corresponding effects on the stability are evaluated.     

Comparison of numerical models of two debris flows in the Cortina d’ Ampezzo area,Dolomites, Italy

The accurate prediction of runout distances, velocities and the knowledge of flow rheology can reduce the casualties and property damage produced by debris flows, providing a means to delineate hazard areas, to estimate hazard intensities for input into risk studies and to provide parameters for the design of protective measures. The application of most of models that describe the propagation and deposition of debris flow requires detailed topography, rheological and hydrological data that are not always available for the debris-flow hazard delineation and estimation. In the Cortina d’Ampezzo area, Eastern Dolomites, Italy, most of the slope instabilities are represented by debris flows; 325 debris-flow prone watersheds have been mapped in the geomorphological hazard map of this area. We compared the results of simulations of two well-documented debris flows in the Cortina d’Ampezzo area, carried on with two different single-phase, non-Newtonian models, the one-dimensional DAN-W and the two-dimensional FLO-2D, to test the possibility to simulate the dynamic behaviour of a debris flow with a model using a limited range of input parameters. FLO-2D model creates a more accurate representation of the hazard area in terms of flooded area, but the results in terms of runout distances and deposits thickness are similar to DAN-W results. Using DAN-W, the most appropriate rheology to describe the debris-flow behaviour is the Voellmy model. When detailed topographical, rheological and hydrological data are not available, DAN-W, which requires less detailed data, is a valuable tool to predict debris-flow hazard. Parameters obtained through back-analysis with both models can be applied to predict hazard in other areas characterized by similar geology, morphology and climate.     

Provenance of the Bosnian Flysch

Sandwiched between the Adriatic Carbonate Platform and the Dinaride Ophiolite Zone, the Bosnian Flysch forms a c. 3000 m thick, intensely folded stack of Upper Jurassic to Cretaceous mixed carbonate and siliciclastic sediments in the Dinarides. New petrographic, heavy mineral, zircon U/Pb and fission-track data as well as biostratigraphic evidence allow us to reconstruct the palaeogeology of the source areas of the Bosnian Flysch basin in late Mesozoic times. Middle Jurassic intraoceanic subduction of the Neotethys was shortly followed by exhumation of the overriding oceanic plate. Trench sedimentation was controlled by a dual sediment supply from the sub-ophiolitic high-grade metamorphic soles and from the distal continental margin of the Adriatic plate. Following obduction onto Adria, from the Jurassic–Cretaceous transition onwards a vast clastic wedge (Vranduk Formation) was developed in front of the leading edge, fed by continental basement units of Adria that experienced Early Cretaceous synsedimentary cooling, by the overlying ophiolitic thrust sheets and by redeposited elements of coeval Urgonian facies reefs grown on the thrust wedge complex. Following mid-Cretaceous deformation and thermal overprint of the Vranduk Formation, the depozone migrated further towards SW and received increasing amounts of redeposited carbonate detritus released from the Adriatic Carbonate Platform margin (Ugar Formation). Subordinate siliciclastic source components indicate changing source rocks on the upper plate, with ophiolites becoming subordinate. The zone of the continental basement previously affected by the Late Jurassic–Early Cretaceous thermal imprint has been removed; instead, the basement mostly supplied detritus with a wide range of pre-Jurassic cooling ages. However, a c. 80 Ma, largely synsedimentary cooling event is also recorded by the Ugar Formation, that contrasts the predominantly Early Cretaceous cooling of the Adriatic basement and suggests, at least locally, a fast exhumation.     

Long-Term Changes in Water Quality and Productivity in the Patuxent River Estuary: 1985 to 2003

We conducted a quantitative assessment of estuarine ecosystem responses to reduced phosphorus and nitrogen loading from sewage treatment facilities and to variability in freshwater flow and nonpoint nutrient inputs to the Patuxent River estuary. We analyzed a 19-year dataset of water quality conditions, nutrient loading, and climatic forcing for three estuarine regions and also computed monthly rates of net production of dissolved O₂ and physical transport of dissolved inorganic nitrogen (DIN) and phosphorus (DIP) using a salt- and water-balance model. Point-source loading of DIN and DIP to the estuary declined by 40–60% following upgrades to sewage treatment plants and correlated with parallel decreases in DIN and DIP concentrations throughout the Patuxent. Reduced point-source nutrient loading and concentration resulted in declines in phytoplankton chlorophyll-a (chl-a) and light-saturated carbon fixation, as well as in bottom-layer O₂ consumption for upper regions of the estuary. Despite significant reductions in seaward N transport from the middle to lower estuary, chl-a, turbidity, and surface-layer net O₂ production increased in the lower estuary, especially during summer. This degradation of water quality in the lower estuary appears to be linked to a trend of increasing net inputs of DIN into the estuary from Chesapeake Bay and to above-average river flow during the mid-1990s. In addition, increased abundance of Mnemiopsis leidyi significantly reduced copepod abundance during summer from 1990 to 2002, which favored increases in chl-a and allowed a shift in total N partitioning from DIN to particulate organic nitrogen. These analyses illustrate (1) the value of long-term monitoring data, (2) the need for regional scale nutrient management that includes integrated estuarine systems, and (3) the potential water quality impacts of altered coastal food webs.     

Tracing the exhumation of the Eclogite Zone (Tauern Window,Eastern Alps) by <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of white mica in eclogites

New radiometric ages from the Subpenninic nappes (Eclogite Zone and Rote Wand – Modereck Nappe, Tauern Window) show that phengites formed under eclogite-facies metamorphic conditions retain their initial isotopic signature, even when associated lithologies were overprinted by greenschist- to amphibolite-facies metamorphism. Different stages of the eclogite-facies evolution can be dated provided ⁴⁰Ar/³⁹Ar dating is combined with micro-structural analyses. An age of 39 Ma from the Rote Wand – Modereck Nappe is interpreted to be close to the burial age of this unit. Eclogite deformation within the Eclogite Zone started at the pressure peak along distinct shear zones, and prevailed along the exhumation path. An age of ca. 38 Ma is only observed for eclogites not affected by subsequent deformation and is interpreted as maximum age due to the possible influence of homogenously distributed excess argon. During exhumation deformation was localised along distinct mylonitic shear zones. This stage is mainly characterised by the formation of dynamically recrystallized omphacite2 and phengite. Deformation resulted in the resetting of the Ar isotopic system within the recrystallized white mica. Flat argon release spectra showing ages of 32 Ma within mylonites record the timing of cooling along the exhumation path, and the emplacement onto the Venediger Nappe. Ar-release patterns and ³⁶Ar/⁴⁰Ar vs.³⁹Ar/⁴⁰Ar isotope correlation analyses indicate no significant ⁴⁰Ar-loss after initial closure, and only a negligible incorporation of excess argon. From the pressure peak onwards, eclogitic conditions prevailed for almost 8–10 Ma.     

Probabilistic modeling of seismically triggered landslides using Monte Carlo simulations

The 2004 Chuetsu earthquakes of Niigata (Japan) triggered numerous landslides, and the most widespread types of landslides were highly disrupted, relatively shallow slides and soil (debris) flows. This paper presented a method to evaluate slope instability using Newmark displacement on a pixel-by-pixel basis in a given area. The proposed method was able to integrate Newmark displacement modeling and Monte Carlo simulations within geographical information systems. In the modeling, an empirical attenuation relationship was utilized to calculate Arias intensity over this study area, and the variability of geotechnical parameters was taken into account to calculate coseismic landslide displacement. Before deriving the displacement from related inputs, the Monte Carlo simulations ran 1,500 times and generated 1,500 displacement values for each grid cell, and then means and standard deviations of displacement were calculated and probabilistic distributions can be obtained. Finally, given 10 cm as a threshold value of displacement, estimated probabilities of displacement exceeding 10 cm were shown as a map of seismic landslide hazards. The resulting hazard map was classified into four categories from very low to high level.     

Slope inclinometers for landslides

Slope inclinometers/indicators are used to determine the magnitude, rate, direction, depth, and type of landslide movement. This information is usually vitally important for understanding the cause, behavior, and remediation of a landslide. However, many inclinometer measurements fail to achieve these intended aims because of lack of appreciation of the many factors that need to be correctly implemented during installation, monitoring, and data reduction to yield useful data. This paper presents some guidelines for understanding, installing, and interpreting slope inclinometers and presents three case histories that illustrate some of the pitfalls that can develop if these guidelines are not followed.     

137Cs示踪的渤海湾黄骅港两侧海区的沉积特征

取自黄骅港防波堤两侧海区的7个无扰动柱状沉积物岩心的^137Cs示踪研究显示．该区^137Cs曲线可以分为3种类型：①不连续的^137Cs曲线（表层未检测到^137Cs）,②连续的^137Cs曲线（表层检测到^137Cs）,③未检测到^137Cs的曲线。^137Cs示踪的沉积速率结果显示：①NE向伸展的防砂堤截断原SE向的沿岸流后,造成了黄骅港防波堤两侧近岸差异性现代沉积过程,即堤北侧距岸约4km以内海区现代沉积速为0．69～1．12cm／a,堤南侧距岸约4km处的站位8以内无沉积物沉积;（2）防砂堤南侧的岸外10km、水深约-4m处,存在一个速率高达1．36cm／a的现代沉积中心。上述结果与前人的工作成果对比表明,黄骅港建港前后,现代沉积速率的空间分布特征发生了明显的变化,进一步说明与人类活动密切相关的地质环境变化主导了现在的地质环境变化．应当引起人们的更多重视。     

渤海湾盆地埕岛油田缝洞型潜山油气藏构造及储层特征

埕岛油田古潜山油气藏为典型的缝洞型碳酸盐岩油气藏。埕岛地区经历了多期次的构造运动,并经受了多期次的断裂与剥蚀作用,为油气成藏创造了良好条件。埕岛油田古潜山可以划分为三个构造单元,即埕北20断层下降盘的西排山,上升盘的中排山和东排山,三个潜山带成帚状敛于凸起最南端,为几个二级构造单元交汇处,构造应力较发育。埕岛油田有三种储集空间类型:晶间孔隙、溶蚀孔洞和裂缝。     

幔源CO_2释出机理、脱气模式及成藏机制研究进展

针对幔源CO2如何从地幔岩浆中脱出并进入沉积地层中形成CO2气藏聚集这一关键问题,总结了国内外研究进展和前缘方向。研究表明,地幔深部的碱性玄武岩浆和碱性岩浆才是深部流体和CO2等挥发份大量赋存、渗滤和释出的场所。浅成侵入岩、次火山岩和火山通道等是CO2释放和聚集的有利位置,岩浆期后和岩浆衰弱期的热液活动阶段是CO2大量释放和聚集的有利时期。幔源CO2进入沉积盆地中具有3种脱气模式,即沿岩石圈断裂直接脱气模式、热流底辟体脱气模式和壳内岩浆房-基底断裂组合脱气模式。CO2的固有物化性质决定其运移相态多样,具有运移和聚集过程同步的特征。只有在满足大量的化学消耗及地层水或原油的溶解和耗散之后才能形成CO2有效聚集。幔源CO2成藏和分布主要受岩浆气源体和气源断裂体系的控制。今后,在超临界CO2及其对油气运移聚集的作用、CO2与深大断裂及火山岩的关系、CO2脱气运移机制、CO与常规烃类油气的耦合差异成藏机制等方面仍需要进一步的研究和探索。