Calderas,landslides and paleo-canyons on Piton de la Fournaise volcano (La Réunion Island,Indian Ocean)

Based upon a re-interpretation of previous data and a new field campaign, a structural evolution is proposed for the early history of Piton de la Fournaise volcano from 500,000 to 50,000 years. Conceptually, it is shown that the formation of a caldera in which lava flows are contained inside the caldera depression, gives time for erosion to excavate deep canyons on the external slopes of the volcano, for example, the Rivière des Remparts, the Rivière Langevin and the Rivière de l'Est canyons on Piton de la Fournaise volcano. These canyons are infilled when lavas, filling the caldera and overflowing its rim, are able again to flow on the external slopes of the volcano. In the past, this excavating/infilling process has occurred twice following the formation of the Rivière des Remparts and Morne Langevin calderas. The formation of the third caldera, the Plaine des Sables caldera, was followed by the excavation of the current canyons. In addition to this process, two large landslides have been documented in the field. The first, which happened about 300,000 years ago, is apparently the first episode of the break up of Piton de la Fournaise volcano, predating the formation of the four large calderas. The second landslide, which occurred 150,000 years ago and is considered to be less extensive, has carried away the entire southern flank of the Rivière des Remparts caldera.     

The Grand Brûlé exploration drilling: New data on the deep framework of the Piton de la Fournaise volcano. Part 2: Secondary minerals

The Grand Brûlé borehole intersects a thick pile of basaltic lavas, down to 1010 m, and a basic-ultrabasic intrusive complex, from 1010 to 3003.50 m.The lavas are, in general, unaltered except in two fractured zones, where hydrothermal fluids circulated at temperatures not exceeding 350 ° C. The main secondary minerals there are pyroxene, feldspar, epidote, actinolite and chlorite.The entire thickness of the intrusive body intersected contains secondary minerals representing three stages of cooling:

1. 1. A late magmatic episode (600–900°C) characterized by biotite, kaersutite, edenite and pargasite.

2. 2. A hydrothermal episode (T<- 350°C) characterized by epidote, albite, biotite, actinolite and chlorite.

3. 3. A phase of serpentinization (T≤ 350°C).

It is very likely that the two later events occurred simultaneously, with physical and chemical interference.     

A 3-D model for the Antarctic ice sheet: a sensitivity study on the glacial-interglacial contrast

On the longer climatic time scales, changes in the elevation and extent of the Antarctic ice sheet have an important role in modulating global atmospheric and oceanographic processes, and contribute significantly to world-wide sea levels. In this paper, a 3-D time-dependent thermomechanical model for the entire ice sheet is presented, that is subsequently used to examine the effects of glacial-interglacial shifts in environmental boundary conditions on its geometry. The model takes into account a coupled ice shelf, grounding-line dynamics, basal sliding and isostatic bed adjustment and considers the fully coupled velocity and temperature fields. Ice flow is calculated on a fine mesh (40 km horizontal grid size and 10 layers in the vertical) for grounded and floating ice and a stress transition zone in between at the grounding line, where all stress components contribute in the effective stress in the flow law. There is free interaction between ice sheet and ice shelf, so that the entire geometry is internally generated. A simulation of the present ice sheet reveals that the model is able to yield realistic results. A series of sensitivity experiments are then performed, in which lower temperatures, reduced accumulation rates and lower global sea level stands are imposed, either singly or in combination. By comparing results of pairs of experiments, the effects of each of these environmental changes can be determined. In agreement with glacial-geological evidence, we found that the most pronounced changes show up in the West Antarctic ice sheet configuration. They appear to be essentially controlled by variations in eustatic sea level, whereas typical glacial-interglacial changes in temperature and ice deposition rates tend to balance one another. These findings support the hypothesis that the Antarctic ice sheet basically follows glacial episodes in the northern hemisphere by means of sea-level teleconnections. Grounding occurs more readily in the Weddell sea than in the Ross sea and long time scales appear to be involved: it may take up to 30–40000 years for these continental shelf areas to become completely grounded after an initial stepwise perturbation in boundary conditions. According to these reconstructions, a steady state Antarctic ice sheet may contribute some 16 m to global sea level lowering at maximum glaciation.     

Isotopic study of the Manaslu granite (Himalaya,Nepal): inferences on the age and source of Himalayan leucogranites

A detailed isotopic study of the Manaslu leucogranite was carried out. A U-Pb age of 25 Ma and a whole rock Rb-Sr age isochron of 18 Ma were obtained, suggesting that the magmatic activity lasted at least 7 Ma. Initial Sr isotopic ratios are very high (0.740 to 0.760) and initial Nd isotopic ratios are low ( _Nd ⁱⁿ : –13 to –16), and they show the existence of large isotopic variations even at the metre scale. These are not the result of perturbations by fluids but rather they reflect the initial isotopic heterogeneity of the source material which has not been obliterated by magmatic processes (e.g. fusion, mixing by convection). These results also support the crustal origin of this leucogranite. The Tibetan slab paragneisses, whose Sr and Nd isotopic ratios are very similar to those of the granite at an age of 20 Ma, are the most probable parental material. Nd model ages for both the leucogranite and the gneisses are in the range 1.5–2 Ga. A model of formation of the Manaslu granite by coalescence of different batches of magma is in agreement with the present data.     

Inversion of interference hydraulic pumping tests in both homogeneous and fractal dual media

This work proposes a complete method for automatic inversion of data from hydraulic interference pumping tests based on both homogeneous and fractal dual-medium approaches. The aim is to seek a new alternative concept able to interpret field data, identify macroscopic hydraulic parameters and therefore enhance the understanding of flow in porous fractured reservoirs. Because of its much contrasted sensitivities to parameters, the dual-medium approach yields an ill-posed inverse problem that requires a specific optimization procedure including the calculation of analytical sensitivities and their possible re-scaling. Once these constraints are fulfilled, the inversion proves accurate, provides unambiguous and reliable results. In the fractal context inverting several drawdown curves from different locations at the same time reveals more accurate. Finally, hydraulic parameters drawn from inversion should be taken into account to improve in various situations the conditioning of up-scaled flow in fractured rocks.     

La prévision du climat : de l'échelle saisonnière à l'échelle décennale

The atmosphere and the ocean are subject to many dynamical instabilities, which limit the time during which their behaviour can be deterministically forecasted. At longer timescales, the atmosphere can be predicted at best using statistical methods, as a response to external forcing linked to sea- and land-surface anomalies. Climate being defined as the mean of atmospheric states, it appears that it can be predicted up to a few months in advance, which is the characteristic time of the so-called slow components of the climate system. Forecasting can sometimes be extended to longer time ranges, especially when the coupled ocean–atmosphere system exhibits internal variability modes, with characteristic times of a few years. Seasonal climate forecasting is most often based upon Monte-Carlo simulations, where the various realisations correspond to slightly different initial conditions. The present sate-of-the-art in Europe (ECMWF) and/or in the USA (IRI) allows to forecast such major phenomena, as El Niño, up to six months in advance. Finally, some parameters may exhibit predictability at still longer time-ranges (inter-annual to decadal), but only for certain regions. The example of electricity production is used to underline the potentially large economical benefit of seasonal climate forecasting. To cite this article: J.-C. André et al., C. R. Geoscience 334 (2002) 1115–1127.

Résumé

L'atmosphère et l'océan sont le siège d'instabilités dynamiques, qui limitent la durée pendant laquelle il est possible d'en prévoir l'évolution de façon déterministe. Au-delà, l'atmosphère n'est plus prévisible, au mieux, que de façon statistique, en fonction du forçage externe qu'exerce(nt) sur elle l'océan et/ou la surface des continents. Le climat (au sens d'une moyenne des états atmosphériques) se révèle ainsi prévisible jusqu'à des échéances temporelles de quelques mois, échelle de temps caractéristique des composantes dites « lentes » du système climatique. La prévision peut s'étendre à des échéances parfois plus longues, dans le cas où le système couplé océan–atmosphère posséderait des modes de variabilité temporelle de périodes caractéristiques de quelques années. La prévision climatique saisonnière est très souvent construite à partir de simulations de type Monte-Carlo, avec des ensembles de réalisations utilisant des conditions initiales légèrement différentes. Dans l'état actuel de ces prévisions, qu'elles soient réalisées en Europe (CEPMMT) ou aux États-Unis (IRI), il est possible de prévoir environ six mois à l'avance un certain nombre de phénomènes climatiques, en particulier ceux liés aux épisodes dits « El Niño », pour lesquels l'amplitude des variations est suffisamment importante. Il existe, par ailleurs, une prévisibilité à encore plus longue échéance (inter-annuelle à décennale), mais seulement pour certains paramètres et certaines régions. L'exemple de la production d'électricité montre l'importance économique potentielle très grande de la prévision climatique saisonnière. Pour citer cet article : J.-C. André et al., C. R. Geoscience 334 (2002) 1115–1127.     

New method for in situ characterization of loose material for landslide mapping purpose

The assessment of grain size distribution and plasticity of loose geological material, during in situ geological investigations, is not obvious. Visual appreciation allows an approximative quantification of the coarse granulometric fractions, but not of the fine ones. Field soils determination methods suggested until now, are visual and tactile tests leading to a very rough estimate, which is only qualitative and not very reproducible. The new proposed field test (GEOLEP method) allows a quick quantification of the fine fraction of loose material. It allows the determination of the sand fraction (fine and medium grained sands) as well as the methylene blue value of the samples. The necessary equipment to perform this test is light and compact and the time needed to analyze one sample is approximately 15 min. Thus it is also possible to carry out numerous measurements in one day. The calibrations were carried out on a selection of 13 natural samples, chosen for their representativeness of the typical alpine quaternary deposits. The results obtained with GEOLEP method are relevant compared with standardized laboratory tests; the obtained correlation indexes are of 73% for the comparison with laboratory stain test results and of 89% with a laboratory method using a similar procedure than the field test. The correlation we performed with Atterberg's limits tests shows that a rough approximation of plasticity index can also be obtained (R² = 75%). This method thus brings a new tool which should allow taking into account the lithological factor (by some quantitative and representative variables) in a reliable way for the evaluation of landslide hazards.     

Peierls dislocation modelling in perovskite (CaTiO<Subscript>3</Subscript>): comparison with tausonite (SrTiO<Subscript>3</Subscript>) and MgSiO<Subscript>3</Subscript> perovskite

We present here a numerical modelling study of dislocations in perovskite CaTiO₃. The dislocation core structures and properties are calculated through the Peierls–Nabarro model using the generalized stacking fault (GSF) results as a starting model. The GSF are determined from first-principles calculations using the VASP code. The dislocation properties such as collinear, planar core spreading and Peierls stresses are determined for the following slip systems: [100](010), [100](001), [010](100), [010](001), [001](100), [001](010), and All dislocations exhibit lattice friction, but glide appears to be easier for [100](010) and [010](100). [001](010) and [001](100) exhibit collinear dissociation. Comparing Peierls stresses among tausonite (SrTiO₃), perovskite (CaTiO₃) and MgSiO₃ perovskite demonstrates the strong influence of orthorhombic distortions on lattice friction. However, and despite some quantitative differences, CaTiO₃ appears to be a satisfactory analogue material for MgSiO₃ perovskite as far as dislocation glide is concerned.