Color removal from industrial wastewater with a novel coagulant flocculant formulation

Chemically enhanced wastewater treatment is attracting substantial interest among the currently employed chemical unit processes in wastewater treatment. Coagulation-flocculation has received considerable attention for yielding high pollutant removal, especially color removal. This investigation presents a novel formulation of coagulation-flocculation for color removal from industrial wastewater and illustrates its efficiency, with aid of measurement of solid sludge content, suspended solid content, percentage of solid recovery, UV absorption in wastewater effluent from two automotive factories. The results show that the novel formulation can remove color content from wastewater efficiently. The treated wastewater had UV absorption close to distillated water and color was removed up to 96% by flocculation / coagulation treatment.     

Mechanical compression release device in steel bracing system for retrofitting RC frames

1 Introduction Braced steel frames are commonly used to resist seismic loads. Their seismic behavior was extensively studied during the past decades (Bertero et al.., 1989; Roeder, 1989; Jain, 1978). Their design is governed by the buckling behavior of the bracing members (ASCE, 1994,2002; CSA, 1994). To prevent or delay the seismic buckling of compressive members in concentrically braced frames in steel structures, a great number of methods have been proposed. These include the use of sp…     

SEISMIC REFRACTION AND SCREENING BY THIN HIGH-VELOCITY LAYERS *

The screening effect of thin, relatively shallow high-velocity layers often presents considerable problems in seismic exploration. Such layers prevent the greater part of the seismic energy from travelling to greater depths and introduce additional refraction arrivals, confusing the seismogram still further. In order to investigate both the screening and refractive properties of high-velocity layers, scale-model experiments have been made over a wide range of layer-thickness/ wavelength ratios (0.05 < d/λ < 2) for suitably chosen material contrasts. The results may be summarised as follows. Refraction arrivals from thin layers in the field may be recognised by their relatively rapid amplitude decay. Furthermore, the “echeloning”-effect observed for refraction first arrivals may be due to the presence of a (thin) layered structure. Since the apparent refraction velocity varies with d/λ when d/λ < 1, differences between vertical well-log velocities and velocities observed along the surface may be expected, making time/depth conversion using surface velocity data inaccurate. Transmission of elastic energy may be expected, if anywhere, only near the shotpoint, at small geophone offset, and for relatively thin screens (d/λ < 0.1). The transmitted signal shape is then independent of the layer thickness. This transmitted energy may be registered either in a reflection set-up with geophones near the shotpoint, or in long-distance refraction work. Three possibilities are offered for overcoming the screening effect of thin high-velocity layers: Use longer-wavelength signals Apply short-spread reflection shooting Apply long-distance refraction shooting The experimental results obtained in scale-model arrangements of such set-ups confirm the potentialities of these methods.     

A novel adsorbent for heavy metal remediation in aqueous environments

The objective of this study was to investigate the possibility of using maize tassel as an alternative adsorbent for the removal of chromium (VI) and cadmium (II) ions from aqueous solutions. The effect of pH, solution temperature, contact time, initial metal ion concentration and adsorbent dose on the adsorption of chromium (VI) and cadmium (II) by tassel was investigated using batch methods. Adsorption for both chromium (VI) and cadmium (II) was found to be highly pH dependent compared to the other parameters investigated. Obtained results gave an adsorption capacity of 79.1 % for chromium (VI) at pH 2, exposure time of 1h at 25 °C. Maximum capacity of cadmium of 88 % was obtained in the pH range of 5-6 at 25 °C after exposure time of 1 h. The adsorption capacities of tassel for both chromium (VI) and cadmium (II) were found to be comparable to those of other commercial adsorbents currently in use for the removal of heavy metals from aqueous wastes. These results have demonstrated the immense potential of maize tassel as an alternative adsorbent for toxic metal ions remediation in polluted water and wastewater.     

A new load balancing scheme on heterogeneous database cluster

IntroductionAlthoughthe development of cluster has gainedmore and more advantages of low-cost ,high-per-formance and high-availability computing, effi-cient resource usage such as CPU, memory andI/Ois still a keyto achieve better performanceincluster syst…     

Aquaculture intensification under land and water limitations

Two intensive aquaculture systems are described in which high yields are obtained for relatively low inputs of land area, water and supplementary feed. The one is a polyculture of a number of fish species in deep cotton irrigation reservoires (5–7 m deep) in Israel. The large volume of water in these reservoirs improves the oxygen regime and dilutes catabolites excreted by the fish. This allows the increase of fish density to 10,000–18,000 fish ha^–1. It also enables the increase of the resevoir's productivity by manuring with liberal amounts of animal wastes. Yields obtained in this system reach over 10 ton ha^–1 yr^–1 at very low feed conversion rates. The second system is practiced in Taiwan for the culture of red tilapia. Pond water is stirred mechanically by paddlewheels to create a gentle current around a central water outlet. This supplies ample oxygen and concentrates wastes in the center of the pond, from where it is removed twice daily, thus alleviating the build-up of catabolite concentration in the pond. Densities of fish amount to 215,000 to 430,000 fish ha^–1, and the yields are accordingly high reaching more than 200 ton ha^–1 yr^–1. The ecological principles involved in these systems are discussed.     

Preliminary assessment of trace metals and polycyclic aromatic hydrocarbons in the sediments

Total concentrations of Cd, Cr, Co, Fe, Pb, Ni, Mn and Zn were determined by atomic absorption spectrophotometry in the surface sediments of Taylor Creek, Southern Nigeria. The most concentrated trace metals, ranging from 113.2 to 5160.7 mg/g-dry weights were Fe, Pb, Mn, Ni and Zn. There was no significant variation in sediment-associated metal levels (P>0.05). The metal pollution index was highest at Agbia/Nedugo and is attributed to local contamination of the Creek. The concentrations of low molecular weight polycyclic aromatic hydrocarbons (PAHs) were also detected and quantified in the sediments by capillary gas chromatography equipped with a flame ionization detector. The concentration levels of 178.1-1266.3 mg/g-wet weights were high for the PAHs. The results indicate that the pollutants, which are bio-accumulatable, could contribute to inferior biodiversity, and shifts in community composition from sensitive to tolerant taxa.     

Potential of natural bed soil in adsorption of heavy metals in industrial waste landfill

Development of higher welfare could not be realized unless by energy consumption and other natural resources. Growth of industrial complexes has shown an unprecedented trend during recent years. Many of these towns have no treatment systems for the industrial wastes leachates. Besides, the chemical composition of wastes in such complexes varies considerably due to the different kinds of industries. It is endeavored in the present work to study the natural potential of soil to treat leachate of such industrial wastes. For this purpose, the Aliabad industrial complex in Tehran — Garmsar road was selected as the study area. The potential of adsorption of elements such as nickel, copper, cadmium, zinc, chromium, lead and manganese was investigated. The results indicated that the soil potential to adsorb heavy metals (except for manganese) was very high (95 %) in the adsorption of heavy metals (except for manganese). Further, chemical partitioning studies revealed that heavy metals are associated with various soil phases such as loosely bonded ions, sulfide and organics to various extents. Among the mentioned soil phases, one can deduce that major portion of metal contaminants is absorbed as loosely bonded ions. Organic bond and sulfide bond are in the 2^nd and 3^rd positions of metal contaminants adsorption, respectively. The results of the present study apparently showed that soil column had ample capacity to adsorb metal contaminants. Thus, determination of soil potential in adsorption of heavy metals during site selection is as important criteria.     

Removal of airborne hexavalent chromium mist using chitosan gel beads as a new control approach

Airborne hexavalent chromium is a known human respiratory carcinogen and allergen. Many workers are exposed to hexavalent chromium in various processes which chromium electroplating plants are the most common. In this study, the feasibility of a new control approach to remove this pollutant using chitosan beads as a biosorbent was investigated. Hexavalent chromium sorption was studied relative to pH, pollution concentration, sorbent concentration, temperature, and air velocity using one factor at a time approach and Taguchi experimental design. Polluted air with different chromium mist concentrations (10–5000 μg/m³) was contacted to chitosan beads (3.3–20 g/L), floating in distilled water with adjusted pH (3–7), using an impinger at different temperatures (20 and 35 °C), and various velocities (1.12 and 2.24 m/s). The ANOVA test result showed that, there were statistical significant differences between factor levels except optimized pH levels. The higher ions removal efficiencies were achieved at lower levels of air velocities, pollution concentrations, and higher levels of solution pH values, temperatures, and sorbent concentrations.