Effect of the addition of granitic powder to an acidic soil from Galicia (NW Spain) in comparison with lime

The impact of diffuse pollution, agricultural land use and climate change on the long-term response of subsurface–surface water quality is not well understood, but is a prerequisite for evaluation of water management options. The goal of this study is to model geochemical evolution of water chemistry from the infiltration through soil into the unsaturated zone, transport through bedrocks and granular aquifers to a river in order to identify zones of steep concentration gradients and high dynamics under transient flow conditions. A numerical model was constructed comprising a 2-D 1,500 m × 150 m vertical cross-section of typical sedimentary rock formations, a glacio-fluvial quaternary gravel aquifer in the valley and soil layers. The model coupled saturated/un-saturated flow and reactive transport under steady state and transient conditions. Geochemical interactions, include intra-aqueous kinetic reactions of oxygen with dissolved organic matter, as well as kinetics of carbonate dissolution/precipitation. This model section was chosen to provide insight in to the principal processes and time scales affecting water chemistry along different flow paths. The numerical simulator MIN3P was used, a finite volume program for variably saturated subsurface flow and multi-component reactive transport. The results show that subsurface water residence times range from approximately 2 to 2,000 years. Different zones are to be expected with respect to the development of mineral equilibria; namely, purely atmospherically influenced, as well as open and closed system carbonate dissolution. Short-term responses to daily averaged changes in precipitation, however, are only visible to some extent in the shallower and near-river parts of flow system and solute loads. This can most likely be explained by directional changes in flow paths, indicating that equilibrium geochemical condition predominate at the hillslope scale, i.e. water quality depends on transport pathways rather than on kinetic effects. The extent of reducing conditions is controlled by the presence of organic-rich layers (i.e. peat deposits), the dissolution kinetics of aquifer organic matter and the subsequent mixing with oxygenated water by hydrodynamic dispersion.     

Influence of Mussel Culture on the Vertical Export of Phytoplankton Carbon in a Coastal Upwelling Embayment (Ría de Vigo,NW Iberia)

The goal of this paper is to find out whether suspended mussel culture affects the vertical fluxes of biogenic particles in the Ría de Vigo on a seasonal scale. With this aim, vertical fluxes of particulate organic carbon (POC) and the magnitude and composition of vertical export of phytoplankton carbon (Cphyto) collected in sediment traps were examined by comparing data obtained inside a mussel farming area (RaS) with those found at a reference station (ReS) not affected by mussels. Our results indicate that mussel farming has a strong impact on sedimentation fluxes under the rafts, not only increasing POC flux but also altering the magnitude and composition of Cphyto fluxes. Average POC flux at RaS (2564?±?1936 mg m^?2 day^?1) was four times higher than at ReS (731?±?276 mg m^?2 day^?1), and much of this increase was due to biodeposit fluxes (Cbiodep) which accounted for large proportion of POC flux (35–60 %). Indeed, because of this high Cbiodep flux, only a small proportion of the POC flux was due to Cphyto flux (3–12 %). At the same time, we observed an increased sedimentation of phytoplankton cells at RaS that could be explained by a combination of mechanisms: less energetic hydrodynamic conditions under mussel rafts, ballast effect by sinking mussel feces, and diatom aggregates. Moreover, mussel farming also altered the quality of the Cphyto flux by removing part of the predatory pressure of zooplankton and thus matching diatom composition in water column and sediment traps.     

Trace elements contamination of agricultural soils affected by sulphide exploitation (Iberian Pyrite Belt,Sw Spain)

Agricultural soils of the Riotinto mining area (Iberian Pyrite Belt) have been studied to assess the degree of pollution by trace elements as a consequence of the extraction and treatment of sulphides. Fifteen soil samples were collected and analysed by ICP-OES and INAA for 51 elements. Chemical analyses showed an As–Cu–Pb–Zn association related with the mineralisation of the Iberian Pyrite Belt. Concentrations were 19–994 mg kg⁻¹ for As, 41–4,890 mg kg⁻¹ for Pb, 95–897 mg kg⁻¹ for Zn and of 27–1,160 mg kg⁻¹ for Cu. Most of the samples displayed concentrations of these elements higher than the 90th percentile of the corresponding geological dominium, which suggests an anthropogenic input besides the bedrock influence. Samples collected from sediments were more contaminated than leptosols because they were polluted by leachates or by mining spills coming from the waste rock piles. The weathering of the bedrock is responsible for high concentrations in Co, Cr and Ni, but an anthropogenic input, such as wind-blown dust, seems to be indicative of the high content of As, Cu, Pb and Zn in leptosols. The metal partitioning patterns show that most trace elements are associated with Fe amorphous oxy-hydroxides, or take part of the residual fraction. According to the results obtained, the following mobility sequence is proposed for major and minor elements: Mn, Pb, Cd, > Zn, Cu > Ni > As > Fe > Cr. The high mobility of Pb, Cu and Zn involve an environmental risk in this area, even in soils where the concentrations are not so high.     

Impact of lightning on organic matter-rich soils: influence of soil grain size and organic matter content on underground fires

A detailed study was carried out on a piece of land that had been struck by lightning during the violent rainstorm that raged over the Island of S?o Miguel (Azores Archipelago) in late October 2006. Temperature and gas measurements (CO₂, CO, H₂S and CH₄) were performed in four study trenches, dug in an area of ∼3 m², where an underground fire had been initiated by the impact with a lightning stroke, followed by the emission of a column of gases and smoke. The soil under study was originally a well-pedogenized about 80 cm thick bed, made of volcanic clayey to silty tephra fallouts and contained 5.5–9.7% of organic matter. The underground fire was monitored for one week and revealed a peak release of 404 ppm CO and 3.4% CO₂ originating from a horizon located about 45 cm under the soil surface. Measurements of temperature, performed one week after the impact, indicated a maximum value of 326°C inside the soil, while 516.5°C were measured on the surface of a lava block interred about 20 cm under the surface. Subsequently, a stratigraphic and sedimentologic study proved the role of the grain-size of the soil and of the organic matter content of the different horizons of the impact area, in determining the ratio between anoxic/oxidised combustion conditions and in the progress of the process itself. It was also noticed that combustion was not total all over in the soil bed and that the process had slightly migrated toward SW during the observation period. The combustion process went on for about ten days, in spite of several other violent rainstorms, until it was artificially extinguished through the excavations made to obtain study trenches. This particular circumstance evidenced the potential natural hazard represented by this kind of atmospheric event, especially in a land where the volcanic nature of the soil may easily mislead inexperienced observers and, consequently, delay proper action.     

Studying of liquid thermolysis products of various types of immature kerogen in sedimentary lacustrine rocks from the valjevo-Mionica basin,Serbia, and the effect of Pt<Superscript>4+</Superscript> and Ru<Superscript>3+</Superscript> ions on their yield and the hydrocarbon composition

Liquid thermolysis products of various types of immature kerogen from sedimentary lacustrine rocks from the Valjevo-Mionica basin in Serbia were studied to evaluate the generation potential of kerogen contained in the organic matter (OM) of the rocks, determine the composition of the biomarkers and alkylaromatics in the liquid thermolysis products, and elucidate the effect of Pt⁴⁺ and Ru³⁺ ions (which were added in the form of inorganic salts) on the yield and hydrocarbon composition of the liquid thermolysis products. For this purpose, representative bitumen-free samples A and B of the sedimentary rocks were subjected to thermolysis under various conditions. Rock A contains high amount of immature organic matter, which is dominated by kerogen type I/II and was generated under strongly reduced sedimentation conditions at a high salinity. Sample B is poorer in immature OM than sample A, and the OM of the former contains kerogen type II/III and was generated predominantly in a reduced environment. The content of the liquid products and the concentrations of hydrocarbons obtained in the course of thermolysis of bitumen-free sample A and the typical oil distribution of the biomarkers and alkylaromatics in the thermolysis products confirm a high generation potential of OM in this rock. In all of our experiments on the thermolysis of bitumen-free sample B, the yield of liquid products and hydrocarbons is low. According to the kerogen type, the thermolysis of this rock generates much gases. The Pt⁴⁺ and Ru³⁺ ions (added in the form of simple inorganic salts) increased the yield of liquid (kerogen type I/II) and gaseous (kerogen type II/III) products. During the thermolysis of various type of immature kerogen in the lacustrine sedimentary rocks at a temperature of 400°C, the OM attained maturation corresponding to the early catagenesis level. Saturated biomarkers and alkylaomatics in the thermolysis products of both samples display typical oil distributions. The type of the source OM most strongly affects the composition of n-alkanes and alkylnaphthalenes. The metal ions used in this research served as catalysts for the methylation process during the thermolysis of immature kerogen, regardless of its type. The effect of the Pt⁴⁺ and Ru³⁺ ions on other transformations of the hydrocarbons, for example, the destruction of high-molecular n-alkanes to low-molecular ones and on isomerization reactions in molecules of polycyclic biomarkers and alkylaromatics to thermodynamically more stable isomers in the thermolysis products is controlled, first of all, by the type of the source OM.     

Identity of the characteristics of electrodynamic seismographs with non-standard periods of seismometers and galvanometers

Summary The maximum changes of magnification were determined for electrodynamic seismographs with standard characteristics and for some experimental long-period seismographs, the constants of which are given in Tab. 1, when the period of the seismometer or galvanometer has a deviation of not more than 5% from the standard value. Under the assumption of control of the other constants of the seismograph, identical amplitude and phase responses with a small change of the absolute magnification of the seismograph may be achieved with characteristicsAII ( ² >0.2), AIV ( ² 0.4), B ( ² >0.3) Nos28, 32 and33. This deviation can also be compensated by adjusting the optical distance. The procedure of adjusting the identical characteristics is suitable for systems with which an accurate setting of the period is difficult and for systems with an uncontrollable period, provided their values are within the limits of allowed deviations from the standard constants.     

3D-Monitoring Big Geo Data on a seaport infrastructure based on FIWARE

Many organizations of all kinds are using new technologies to assist the acquisition and analysis of data. Seaports are a good example of this trend. Seaports generate data regarding the management of marine traffic and other elements, as well as environmental conditions given by meteorological sensors and buoys. However, this enormous amount of data, also known as Big Data, is useless without a proper system to organize, analyze and visualize it. SmartPort is an online platform for the visualization and management of a seaport data that has been built as a GIS application. This work offers a Rich Internet Application that allows the user to visualize and manage the different sources of information produced in a port environment. The Big Data management is based on the FIWARE platform, as well as “The Internet of Things” solutions for the data acquisition. At the same time, Glob3 Mobile (G3M) framework has been used for the development of map requirements. In this way, SmartPort supports 3D visualization of the ports scenery and its data sources.     

The Relegation Algorithm

The relegation algorithm extends the method of normalization by Lie transformations. Given a Hamiltonian that is a power series = ₀+ ₁+ ... of a small parameter , normalization constructs a map which converts the principal part ₀into an integral of the transformed system — relegation does the same for an arbitrary function [G]. If the Lie derivative induced by [G] is semi-simple, a double recursion produces the generator of the relegating transformation. The relegation algorithm is illustrated with an elementary example borrowed from galactic dynamics; the exercise serves as a standard against which to test software implementations. Relegation is also applied to the more substantial example of a Keplerian system perturbed by radiation pressure emanating from a rotating source.This revised version was published online in October 2005 with corrections to the Cover Date.     

A multiple linear statistical model for estimating the mean maximum urban heat island

Summary ¶This study examines the spatial and quantitative influence of urban factors on the surface air temperature field of the medium-sized of Szeged, Hungary, using mobile measurements under different weather conditions in the periods of March 1999–February 2000 and April–October 2002. Efforts have been concentrated on the development of the urban heat island (UHI) in its peak development during the diurnal cycle. Tasks included: (1) determination of spatial distribution of mean maximum UHI intensity and some urban surface parameters (built-up and water surface ratios, sky view factor, building height) using the standard Kriging procedure, as well as (2) development of a statistical model in the so-called heating and non-heating seasons using the above mentioned parameters and their areal extensions. In both seasons the spatial distribution of the mean maximum UHI intensity fields had a concentric shape with some local irregularities. The intensity reaches more than 2.1°C (heating season) and 3.1°C (non-heating season) in the centre of the city. For both seasons statistical model equations were determined by means of stepwise multiple linear regression analysis. As the measured and calculated mean maximum UHI intensity patterns show, there is a clear connection between the spatial distribution of the urban thermal excess and the examined land-use parameters, so these parameters play an important role in the evolution of the strong UHI intensity field. From the above mentioned parameters the sky-view factor and the building height were the most determining factors which are in line with the urban surface energy balance. Therefore in the future, using our model it will be possible to predict mean maximum UHI intensity in other cities, which have land-use features similar to Szeged.Received September 26, 2002; revised February 25, 2003; accepted March 22, 2003 Published online July 30, 2003