The occultation of κ geminorum by Eros

The predictions and observations of the occultation of κ Gem by Eros on January 24, 1975, are described. At least eight positive and several critical negative observations were made in western New England. The paucity of observations on the western side of the track makes the analysis somewhat ambiguous, but a circular cross section of diameter up to 23 km gives a good fit to most of the available data. Consideration of a crucial, unconfirmed negative observation indicates that an elliptical solution 17 by 7 km (with the long axis in the direction of motion of the “shadow” of Eros) may be preferable, but this does not represent the positive observations so satisfactorily. The ellipse was therefore distorted into a more irregular shape about 20 km long and 7 km wide, rounded on one long side and flattened on the other. Both this irregular shape and the ellipse yield geometric albedos near 0.5, which is considerably higher than has been derived for most other planets or satellites lacking an atmosphere. The albedo that corresponds to the circular solution (0.1) is less than the polarimetric albedo of 0.21 for Eros. It is suggested either that the circle should be warped into an ellipse of dimensions 21 by 13 km, or, if some weight is given to the critical negative observation and the westernmost positive observation, that the profile is a kind of dumbbell.     

Tectonic evolution of the Cape and Karoo basins of South Africa

The Cape and Karoo basins formed within the continental interior of Gondwana. Subsidence resulted from the vertical motion of rigid basement blocks and intervening crustal faults. Each basin episode records a three-stage evolution consisting of crustal uplift, fault-controlled subsidence, and long periods of regional subsidence largely unaccompanied by faulting or erosional truncation. The large-scale episodes of subsidence were probably the result of lithospheric deflection due to subduction-driven mantle flow. The early Paleozoic Cape basin records the combined effects of a north-dipping intra-crustal décollement (a late Neoproterozoic suture) and a right-stepping offset between thick Rio de la Plata craton and Namaqua basement. Following the Saldanian orogeny, a suite of small rift basins and their post-rift drape formed at this releasing stepover. Great thicknesses of quartz sandstone (Ordovician–Silurian) and mudstone (Devonian) accumulation are attributed to subsidence by rheological weakening and mantle flow. In contrast, the Karoo basin is a cratonic cover that mimics the underlying basement blocks. The Permian Ecca and lower Beaufort groups were deposited in a southward-deepening ramp syncline by extensional decoupling on the intra-crustal décollement. Reflection seismic and deep-burial diagenetic studies indicate that the Cape orogeny started in the Early Triassic. Deformation was partitioned into basement-involved strike-slip faults and thin-skinned thrusting. Uplift of the Namaqua basement resulted in erosion of the Beaufort cover. East of the Cape fold belt, contemporaneous subsidence and tilting of the Natal basement created a late Karoo transtensional foreland basin, the Stormberg depocentre. Early Jurassic tectonic resetting and continental flood basalts terminated the Karoo basin.     

Variability and propagation of Labrador Sea Water in the southern subpolar North Atlantic

The variability of two modes of Labrador Sea Water (LSW) (upper and deep Labrador Sea Water) and their respective spreading in the interior North Atlantic Ocean are investigated by means of repeated ship surveys carried out along the zonal WOCE line A2/AR19 located at 43–48°N (1993–2007) and along the GOOS line at about 48–51°N (1997–2002). Hydrographic section data are complemented by temperature, salinity, and velocity time series recorded by two moorings. They have been deployed at the western flank of the Mid-Atlantic Ridge (MAR) in the Newfoundland Basin during 1996–2004. The analysis of hydrographic anomalies at various longitudes points to a gradual eastward propagation of LSW-related signals, which happens on time scales of 3–6 years from the formation region towards the MAR. Interactions of the North Atlantic Current (NAC) with the Deep Western Boundary Current (DWBC) close to Flemish Cap point to the NAC being the main distributor of the different types of LSW into the interior of the Newfoundland Basin. Comparisons between the ship data and the mooring records revealed that the mooring sites are located in a region affected by highly variable flow. The mooring time series demonstrate an elevated level of variability with eddy activity and variability associated with the NAC considerably influencing the LSW signals in this region. Hydrographic data taken from Argo profiles from the vicinity of the mooring sites turned out to mimic quite well the temporal evolution captured by the moorings. There is some indication of occasional southward flow in the LSW layer near the MAR. If this can be considered as a hint to an interior LSW-route, it is at least of minor importance in comparison to the DWBC. It acts as an important supplier for the interior North Atlantic, distributing older and recently formed LSW modes southward along the MAR.     

Petroleum composition in the Cuu Long Basin (Mekong Basin) offshore southern Vietnam

The Cuu Long Basin (Mekong Basin) is a rift basin off southern Vietnam, and the most important petroleum producing basin in the country. However, information on petroleum type and characteristics has hitherto been largely unavailable to the public. This paper presents petroleum geochemical data on nine oil samples from four different producing fields in the Cuu Long Basin: the Dragon (Rong), Black Lion (Sutu-Den), Sunrise (Rang ?ong) and White Tiger (Bach Ho) Fields. The oils are highly paraffinic with bimodal normal alkane distributions and show moderate pristane to phytane ratios and a conspicuous hyperbolic decrease in abundance with increasing carbon number of hopane homologues from C₃₀ to C₃₅. The TPP-index of Holba et al. (Holba, A.G., Dzou, L.I., Wood, G.D., Ellis, L., Adam, P., Schaeffer, P., Albrecht, P., Greene, T., Hughes, W.B., 2003. Application of tetracyclic polyprenoids as indicators of input from fresh–brackish water environments. Organic Geochemistry 34, 441–469) is equal to 1 in all samples which in combination with tricyclic triperpane T26/T25 ratios >1 and the n-alkane and hopane distributions mentioned above provide a strong indication of an origin from lacustrine source rocks. This is supported by the absence of marine C₃₀ desmethyl steranes (i.e. 24-n-propylcholestanes) and marine diatom-derived norcholestanes. Based on the overall biological marker distributions, the lakes probably belonged to the overfilled or balanced-fill types defined by Bohacs et al. (Bohacs, K.M., Carroll, A.R., Neal, J.E., Mankiewicz, P.J., 2000. Lake-basin type, source potential, and hydrocarbon character. An integrated sequence-stratigraphic–geochemical framework. AAPG Studies in Geology 46, 3–34). The oils were generated from source rocks at early- to mid-oil-window maturity, presumably Oligocene lacustrine shales that are present in the syn-rift succession. Oils from individual fields may, however, be distinguished by a combination of biological marker parameters, such as the oleanane index, the gammacerane index, the relative abundance of tricyclic terpanes, the proportions of diasteranes and 28-norspergulane, complemented by other parameters. The oils of the Cuu Long Basin show an overall similarity to the B-10 oil from the Song Hong Basin off northern Vietnam, but are markedly different from the seepage oils known from Dam Thi Nai on the coast of central Vietnam.     

A sonic well log of the basement complex of the Walvis Ridge

A sonic well log was obtained within the basement complex of the Walvis Ridge during Deep Sea Drilling Project Leg 74. The top of the basement complex is characterized by smooth acoustic reflectors. The rocks recovered within the basement complex consist of basalts with intercalated sediments. According to the log ～-50% of the upper 75 m of basement are igneous rocks and the other 50% sedimentary. Sonobuoy results indicate that the ratio of sediments to basalt increases with depth for an additional 225 m until a typical oceanic velocity structure is observed. Paleontological results suggest that the processes forming this upper 300 m of the basement complex was accomplished within a short time interval.     

Tectonic and magmatic ridges in the eltanin fault system,South Pacific

A Seabeam reconnaissance of the 400 km-long fast-slipping (88 mm yr^-1) Heezen transform fault zone and the 55 km-long spreading center that links it to Tharp transform defined and bathymetrically described several types of ridges built by tectonic uplift and volcanic construction. Most prominent is an asymmetric transverse ridge, at which abyssal hills adjacent to the fault zone have been raised 2–3 km above normal rise-flank depths. Topographic and petrologic evidence suggests that this uplift, which has produced a 5400 m scarp from the crest of the ridge to the floor of a 10 km-wide transform valley, is caused by rapid serpentinization of upper mantle which has been exposed to hydrothermal circulation by fault-zone fracturing of an unusually thin crust. Transverse ridges have been thought atypical of fast-slipping transforms. One class of volcanic ridge more common at these sites is the overshot ridge, formed by prolongation of spreading-center rift zones obliquely across the transform. Overshot ridges are well developed at Heezen transform, especially at the eastern end where an eruptive rift zone extending 60 km from the southern tip of the East Pacific Rise has built a transform-parallel ridge that fills the eastern transform valley. Obliteration of fault-zone structure by ridges overshooting from the spreading center intersections means that the topography of the aseismic fracture zones is not just inherited from that of the active transform fault zone. The latter has several en echelon and overlapping fault traces, linked by short oblique spreading axes that generally form pull-apart basins rather than volcanic ridges. Interpretation of the origin and pattern of the fault zone's tectonic and volcanic relief requires refinement of the plate geography and history of this part of the Pacific-Antarctic boundary, using new Seabeam and magnetic traverses to supplement and adjust the existing geophysical data base.     

Basement imaging with Side-Looking Seismics

The multistreamer Side-Looking Seismic system presented in this paper makes a sonograph of uncovered or buried crustal topography, thus revealing the structural fabric of the oceanic basement, even when this is covered with a sedimentary layer. Major elements of the system are an airgun as a sound source, five single-channel parallel streamers and two minicomputers for signal capture and processing.The system is used simultaneously for enhanced single-channel seismic profiling and for side-looking seismics. A vertical section with an improved signal-to-noise ratio and a suppression of side-echoes is produced on a digital seismic recorder. Primary side-looking seismic output in the form of 5 profiles with different angles of incidence is obtained within 10 seconds. This part of the processing can be done in real time.In sediment-covered areas the low frequencies used cause the slanted profiles (the side beams in the primary output) to be side-looking sonar images of buried topography. The projection process yielding final side-looking output corrects for slant range deformation caused by the water column and, if necessary, for deformation caused by refraction within the sedimentary column. The result approaches a conformal map of the structure of the traversed basement. Swath width is mainly determined by water depth and refraction effects in the sediment. In Madeira abyssal plain a swath width of 8000 m was attained in a water depth of 5000 m.Within the swath, oceanic basement structures are recognized in the form of elongate more or less parallel reflectors. They are interpreted as buried spreading topography. The lack of side-echoes within fracture zones combined with typical wall signatures can be used to trace fracture zones. These features are demonstrated for an area in Madeira abyssal plain.     

The differences between a wing and a planing plate in two-dimensional flow

The normal force coefficient on a flat planing surface having arbitrary heave and pitch motion in two-dimensional flow is compared with the lift coefficient of a thin wing in an infinite fluid. Despite the totally different derivations, they are found to be identical (at large Froude numbers and low trim angles and allowing for the wing's interaction with twice as much fluid) at low reduced frequencies. For higher frequency motions, the wing's angle of attack induced lift and its pitch and heave damping are less than those of a planing surface, but the acceleration terms remain identical. The differences at the higher reduced frequencies are due to the fact that, in invisad irrotational flow, the planning plate cannot leave a vortex wake, whereas a wing does.It seems to follow that the “virtual mass” planing hull analysis can be applied to “quasi-static” problems involving wings and bodies in an infinite fluid without the slenderness restriction originally imposed by Jones (1946). Certainly, it is remarkable that the so called “quasi-steady” forces on a two-dimensional wing can be obtained in a few lines of elementary analysis. On the other hand, the method fails entirely when used to compute the pitching moment on a two-dimensional plate, even though it has been found to give good results for the three-dimensional case (Payne, 1981c).This work is offered as a very incomplete study of an intriguing relationship between two very different bodies of analysis. Much more work will need to be done before the relationship between the two approaches will be fully understood.     

Bioavailability: the organism as sensor

The use of a system of continuous culture of phytoplankton at constant population density, the ‘cage-culture’ turbidostat, as a monitor of the bioavailability of pollutant materials, is illustrated. In the case of proposed dredge spoils from two polluted areas, it is shown that bulk analyses for scheduled materials cannot be equated with bioavailability. Monitoring for the effect of the whole pollutant mixture on a properly chosen test population could obviate the necessity for chemical analyses for each component.     

Tritium profiles in the Weddell Sea

Tritium data were collected between 1985 and 1987 on several cruises of the German research icebreaker “Polarstern” to the Weddell Sea. Maximum tritium concentrations in the surface waters are of the order of 200 mTU. The minimum values observed in the Weddell Sea Deep Water at about 1000 m depth are about 15–40 mTU. The bottom waters show tritium concentrations of about 70–100 mTU in the central gyre, increasing to about 120 mTU in the northwestern corner of the Weddell Sea. The overflowing Ice Shelf Water observed on the continental slope west of the Filchner Depression has tritium concentrations close to those of the surface waters, indicating rapid renewal of this water mass. The data reflect the rapid renewal of the bottom waters in the northwestern corner of the Weddell Sea and the mixing of bottom water from this boundary current into the bottom waters of the central Weddell Gyre.