Coupling hydrogeological with surface runoff model in a Poltva case study in Western Ukraine

This paper presents the hydrological coupling of the software framework OpenGeoSys (OGS) with the EPA Storm Water Management Model (SWMM). Conceptual models include the Saint Venant equation for river flow, the 2D Darcy equations for confined and unconfined groundwater flow, a two-way hydrological coupling flux in a compartment coupling approach (conductance concept), and Lagrangian particles for solute transport in the river course. A SWMM river–OGS aquifer inter-compartment coupling flux is examined for discharging groundwater in a systematic parameter sensitivity analysis. The parameter study involves a small perturbation (first-order) sensitivity analysis and is performed for a synthetic test example base-by-base through a comprehensive range of aquifer parametrizations. Through parametrization, the test cases enables to determine the leakance parameter for simulating streambed clogging and non-ocillatory river-aquifer water exchange rates with the sequential (partitioned) coupling scheme. The implementation is further tested with a hypothetical but realistic 1D river–2D aquifer model of the Poltva catchment, where discharging groundwater in the upland area affects the river–aquifer coupling fluxes downstream in the river course (propagating feedbacks). Groundwater contribution in the moving river water is numerically determined with Lagrangian particles. A numerical experiment demonstrates that the integrated river–aquifer model is a serviceable and realistic constituent in a complete compartment model of the Poltva catchment.     

Turbulent viscosity and Jupiter's tidal Q

A recent estimate of tidal dissipation by turbulent viscosity in Jupiter's convective interior predicts that the current value of the planet's tidal Q ～ 5 × 10⁶. We point out a fundamental error in this calculation, and show that turbulent dissipation alone implies that at present Q ～ 5 × 10¹³. Our reduced estimat for the rate of tidal dissipation shows conclusively that tidal torques have produced only negligible modifications of the orbits of the Galilean satellites over the age of the solar system.     

Further examples of ventifacts and unusual patterned ground from the Falkland Islands, South Atlantic

Abstract Examples of ventifacts and forms of unusual patterned ground that differ in situation, characteristics and/or origin to types reported previously are described from the Falkland Islands, South Atlantic. The ventifacts, represented by clasts projecting from an eroding tillite shore platform, have been grooved by the passage of windblown sand. The patterned ground forms comprise stone polygons on clay loam regolith, stone polygons on peat, peat‐filled desiccation cracks on peat, and clusters of on‐edge clasts (stone packings) on a gravel beach. Aeolian transport of particles is considered responsible for the infill of the polygonal cracks. The clusters of on‐edge clasts are thought to have developed as a result of wave action, in particular backwash and/or undertow. Although these features occupy small surface areas they provide useful information about local geomorphic processes and testify to the marked diversity of such features in nature.     

Titan's atmospheric chemistry: Photolysis of gas mixtures containing hydrogen cyanide and carbon monoxide at 185 and 254 nm

The formation of organic compounds in the atmosphere of Titan is an ongoing process of the generation of complex organics from the simplest hydrocarbon, methane. Solar radiation and magnetosphere electrons are the main energy sources that drive the reactions in Titan's atmosphere. Since energy from solar radiation is 200 times greater than that from magnetosphere electrons, we have investigated the products formed by the action of UV radiation (185 and 254 nm) on a mixture of gases containing nitrogen, methane, hydrogen, acetylene, ethylene, and cyanoacetylene, the basic gas mixture (BGM) that simulates aspects of Titan's atmosphere using a flow reactor [Tran, B.N., Ferris, J.P., Chera, J.J., 2003a. Icarus 162, 114-124; Tran, B.N., Joseph, J.C., Force, M., Briggs, R.G., Vuitton, V., Ferris, J.P., 2005. Icarus 177, 106-115]. The present research extends these studies by the addition of carbon monoxide and hydrogen cyanide to the BGM. Quantum yields for the loss of reactants and the formation of volatile products were determined and compared with those measured in the absence of the hydrogen cyanide and carbon monoxide. The GCMS analyses of the volatile photolysis products from the BGM, with added hydrogen cyanide, had a composition similar to that of the BGM while the photolysis products of the BGM with added carbon monoxide contained many oxygenated compounds. The infrared spectrum of the corresponding solid product revealed the absorption band of a ketone group, which was probably formed from the reaction of carbon monoxide with the free radicals generated by photolysis of acetylene and ethylene. Of particular interest was the observation that the addition of HCN to the gas mixture only resulted in a very small change in the C/N ratio and in the intensity of the CN frequency at 2210 cm⁻¹ in the infrared spectrum suggesting that little HCN is incorporated into the haze analog. The C/N ratio of the haze analogs was found to be in the 10-12 range. The UV spectra of the solid products formed when HCN or CO added to the BGM is similar to the UV absorption formed from the BGM alone. This result is consistent with absence of additional UV chromophores to the solid product when these mixtures are photolyzed. The following photoproducts, which were not starting materials in our photochemical studies, have been observed on Titan: acetonitrile, benzene, diacetylene, ethane, propene, propane, and propyne.     

Cross-shelf transport into nearshore waters due to shoaling internal tides in San Pedro Bay, CA

In the summer of 2001, a coastal ocean measurement program in the southeastern portion of San Pedro Bay, CA, was designed and carried out. One aim of the program was to determine the strength and effectiveness of local cross-shelf transport processes. A particular objective was to assess the ability of semidiurnal internal tidal currents to move suspended material a net distance across the shelf. Hence, a dense array of moorings was deployed across the shelf to monitor the transport patterns associated with fluctuations in currents, temperature and salinity. An associated hydrographic program periodically monitored synoptic changes in the spatial patterns of temperature, salinity, nutrients and bacteria. This set of measurements show that a series of energetic internal tides can, but do not always, transport subthermocline water, dissolved and suspended material from the middle of the shelf into the surfzone. Effective cross-shelf transport occurs only when (1) internal tides at the shelf break are strong and (2) subtidal currents flow strongly downcoast. The subtidal downcoast flow causes isotherms to tilt upward toward the coast, which allows energetic, nonlinear internal tidal currents to carry subthermocline waters into the surfzone. During these events, which may last for several days, the transported water remains in the surfzone until the internal tidal current pulses and/or the downcoast subtidal currents disappear. This nonlinear internal tide cross-shelf transport process was capable of carrying water and the associated suspended or dissolved material from the mid-shelf into the surfzone, but there were no observation of transport from the shelf break into the surfzone. Dissolved nutrients and suspended particulates (such as phytoplankton) transported from the mid-shelf into the nearshore region by nonlinear internal tides may contribute to nearshore algal blooms, including harmful algal blooms that occur off local beaches.     

Anomalous subsidence on the rifted volcanic margin of Pakistan: No influence from Deccan plume

The role of hotter than ambient plume mantle in the formation of a rifted volcanic margin in the northern Arabian Sea is investigated using subsidence analysis of a drill site located on the seismically defined Somnath volcanic ridge. The ridge has experienced > 4 km of subsidence since 65 Ma and lies within oceanic lithosphere. We estimate crustal thickness to be 9.5–11.5 km. Curiously < 400 m of the thermal subsidence occurred prior to 37 Ma, when subsidence rates would normally be at a maximum. We reject the hypothesis that this was caused by increasing plume dynamic support after continental break-up because the size of the thermal anomalies required are unrealistic (> 600 °C), especially considering the rapid northward drift of India relative to the Deccan-Réunion hotspot. We suggest that this reflects very slow lithospheric growth, possibly caused by vigorous asthenospheric convection lasting > 28 m.y., and induced by the steep continent–ocean boundary. Post-rift slow subsidence is also recognized on volcanic margins in the NE Atlantic and SE Newfoundland and cannot be used as a unique indicator of plume mantle involvement in continental break-up.     

A community-wide intercomparison exercise for the determination of dissolved iron in seawater

The first large-scale international intercomparison of analytical methods for the determination of dissolved iron in seawater was carried out between October 2000 and December 2002. The exercise was conducted as a rigorously “blind” comparison of 7 analytical techniques by 24 international laboratories. The comparison was based on a large volume (700 L), filtered surface seawater sample collected from the South Atlantic Ocean (the “IRONAGES” sample), which was acidified, mixed and bottled at sea. Two 1-L sample bottles were sent to each participant. Integrity and blindness were achieved by having the experiment designed and carried out by a small team, and overseen by an independent data manager. Storage, homogeneity and time-series stability experiments conducted over 2.5 years showed that inter-bottle variability of the IRONAGES sample was good (< 7%), although there was a decrease in iron concentration in the bottles over time (0.8–0.5 nM) before a stable value was observed. This raises questions over the suitability of sample acidification and storage.     

Efstadalsvatn – a multi-proxy study of a Holocene lacustrine sequence from NW Iceland

Multi-proxy data, both lithostratigraphic and biostratigraphic, are presented from Efstadalsvatn, a lake in NW Iceland. The sequence covers the period 10,000 to 3500 ¹⁴C yr B.P. The biostratgraphic data include the first Icelandic chironomid-based reconstruction of Holocene mean July air temperatures, using a Norwegian training set in the absence of modern Icelandic data. The results show that deglaciation and ecosystem development probably began before 10,000 ¹⁴C yr B.P. and that July temperatures were around 4°C at ca. 9500 ¹⁴C yr B.P. Temperatures then rose to ca. 8°C at the time of the deposition of the Saksunarvatn tephra (9100 ¹⁴C yr B.P.), reaching ca. 10°C by 8500 ¹⁴C yr B.P., high enough for the growth of tree birch, although successful birch colonisation did not take place until 6750 ¹⁴C yr B.P. There is some evidence for cooling immediately preceding 9100 ¹⁴C yr B.P. There is little firm biostratigraphic evidence for the 8200 cal. B.P. event, although this may be due to a relatively low resolution pollen sampling interval, but there are changes at this time in the total carbon (TC) and mass susceptibility (MS) data. Optimal temperatures and relative vegetation stability may have occurred between 8000–6100 ¹⁴C yr B.P. but the chironomid assemblages indicate higher temperatures after 5000 ¹⁴C yr B.P. This latter interpretation may, however, reflect delayed colonisation of thermophilous taxa and requires further investigation. There is evidence in the lithostratigraphy for greater local terrestrial instability after 6100 ¹⁴C yr B.P. but it seems unlikely that this led to the redevelopment of ice in the catchment. The biostratigraphic records appear to show a degree of resistence to climate forcing throughout the early and middle Holocene. The new chironomid-based temperature reconstruction needs to be refined by further studies in Iceland, particularly the development of an Icelandic training set, but has already demonstrated the problems of paleoclimatic interpretations based on pollen and/or macrofossil evidence alone.     

Effectiveness of post-fire salvage logging stream buffer management for hillslope erosion in the U.S. Inland Northwest Mountains

Active wildfire seasons in the western U.S. warrant the evaluation of post-fire forest management strategies. Ground-based salvage logging is often used to recover economic loss of burned timber. In unburned forests, ground-based logging often follows best management practices by leaving undisturbed areas near streams called stream buffers. However, the effectiveness of these buffers has not been tested in a post-wildfire setting. This experiment tested buffer width effectiveness with a novel field-simulated rill experiment using sediment-laden runoff (25 g/L) released over 40 min at evenly timed flow rates (50, 100 and 150 L/min) to measure surface runoff travel length and sediment concentration under unburned and high and low soil burn severity conditions at 2-, 10- and 22-month post-fire. High severity areas 2-month post-fire had rill lengths of up to 100 m. Rill length significantly decreased over time as vegetation regrowth provided ground cover. Sediment concentration and sediment dropout rate also varied significantly by soil burn severity. Sediment concentrations were 19 g/L for the highest flow 2-month post-fire and reduced to 6.9–14 g/L 10-month post-fire due to abundant vegetation recovery. The amount of sediment dropping out of the flow consistently increased over the study period with the low burn severity rate of 1.15 g L⁻¹ m⁻¹ approaching the unburned rate of 1.29 g L⁻¹ m⁻¹ by 2-year post-fire. These results suggest that an often-used standard, 15 m buffer, was sufficient to contain surface runoff and reduce sediment concentration on unburned sites, however buffers on high burn severity sites need to be eight times greater (120 m) immediately after wildfire and four times greater (60 m) 1-year post-fire. Low burn severity areas 1-year post-fire may need to be only twice the width of an unburned buffer (30 m), and 2-year post-fire these could return to unburned widths.