Global comparison of the regional rainfall results of enhanced greenhouse coupled and mixed layer ocean experiments: Implications for climate change scenario development

The extent of agreement amongst current global climate models (GCMs) on the global pattern of rainfall change simulated under enhanced greenhouse conditions is assessed. We consider the results of five experiments which use a simple mixed layer ocean formulation and five which use a fully dynamic ocean model (coupled experiments). For many regions of the northern hemisphere there is strong agreement amongst both mixed layer and coupled experiments on the sign of simulated rainfall change. However, in the southern hemisphere there are large, and apparently systematic, differences between the coupled and mixed layer experiments. In particular, whereas the mixed layer experiments agree on simulated rainfall increase in summer in the tropics and subtropics of the Australian sector, the coupled experiments agree (although more weakly) on rainfall decreases. These differences appear to relate to the much reduced warming simulated by the coupled experiments in the high latitudes of the southern hemisphere. However, recent oceanographie evidence suggests that this suppressed warming may be considerably overestimated. We conclude therefore that despite the in-principle advantages of coupled models, it may be too soon to base some regionally specific climate change scenarios solely on the results of coupled experiments.     

Evolution of cool skin and direct air-sea gas transfer coefficient during daytime

Absorption of solar radiation within the thermal molecular sublayer of the ocean can modify the temperature difference across the cool skin as well as the air-sea gas transfer. Our model of renewal type is based on the assumption that the thermal and diffusive molecular sublayers below the ocean surface undergo cyclic growth and destruction, the heat and gas transfer between the successive burst events are performed by molecular diffusion. The model has been upgraded to include heating due to solar radiation. The renewal time is parameterized as a function of the surface Richardson number and the Keulegan number. A Rayleigh number criterion characterizes the convective instability of the cool skin under solar heating. Under low wind speed conditions, the solar heating can damp the convective instability, strongly increasing the renewal time and correspondingly decreasing the interfacial gas exchange. In the ocean, an additional convective instability caused by salinity flux due to evaporation becomes of importance in such cases. The new parameterization is compared with the cool skin data obtained in the western equatorial Pacific during the Tropical Ocean Global Atmosphere Coupled Ocean Atmosphere Response Experiment in February 1993. In combination with a model of the diurnal thermocline it describes main features of the field data both in nighttime and daytime. Under low wind speed conditions (< 5 m s^-1) diurnal variations of the sea surface temperature due to the formation of a diurnal thermocline were substantially larger than those across the cool skin. Under wind speeds > 5 m s^-1, diurnal variations of the surface temperature due to the variations of the thermal molecular sublayer become more important.     

A nonlinear tensor field and the second metric tensor

In our preceding paper {see [L. Sh. Grigorian and S. Gottlöber, Astrofizika (in press)]} we investigated a self-gravitating system consisting of a scalar field and a linear tensor field _ik= _ki with minimal coupling and with allowance for the action of vacuum polarization effects. In the present paper we investigate the case of a nonlinear tensor field _ik. The action S ⁽⁾ of the field _ik is determined by the difference R_ik — _ik, where R_ik is the space-time Ricci tensor and Rik is the analogous quantity constructed using the metric _ik=g_ik+_ik induced by _ik ( is a free parameter). Here S ⁽⁾ coincides with the previously known expression for the action of a linear field _ik. Equations of motion are derived for _ik in curved space-time. The energy-momentum metric tensor, determining the contribution of _ik to the gravitational field equations, is calculated.Translated from Astrofizika, Vol. 39, No. 1, pp. 135–144, January-March, 1996.     

Effects of water on strength and failure mode of coarse-grained granites at 300°C

Summary Deformation experiments have been performed in a triaxial compression cell at a temperature of 300°C and confining pressures up to 65 MPa using samples of homogeneous, fresh two-mica-granite (RM) and monzogranite (CM). The cylindrical specimens (d=70 mm, h=140 mm, V=540 cm³) were tested undrained under dry (105°C), as received, and water saturated conditions at deformation rates between and . The mechanical behaviour of the two types of coarse-grained, crystalloblastic granites is critically influenced by mineralogical composition, porosity, and the amount of intergranular water present in the samples. The failure stress of the CM granite is at about 65% of that of the RM granite; in both rocks strength decreases with increasing porosity and water content.The presence of interstitial water causes a failure mode of non-localized, homogeneously distributed microcracking in the central parts of the samples, whereas, in runs with dry granites, strain localization along a single shear fracture was observed. When aqueous fluids are present, the macroscopic style of deformation of granites appears to be ductile even at lowP andT conditions. Strength and angle of internal friction are reduced to very low values. The style of deformation, as well as the reduction of strength of the water-saturated rock samples, is due to mechanical and chemical effects of intergranular water at elevated temperatures.The maximum differential stresses measured for these coarse-grained granites are much lower than the strength commonly reported for other granites, e. g. Westerly and Charcoal granites. Our data suggest that the strength of the granitic crust under differential stress is lower than currently deduced from laboratory experiments.     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

Seismic hazard of Egypt

Earthquake hazard parameters such as maximum expected magnitude,M _max, annual activity rate,, andb value of the Gutenberg-Richter relation have been evaluated for two regions of Egypt. The applied maximum likelihood method permits the combination of both historical and instrumental data. The catalogue used covers earthquakes with magnitude 3 from the time interval 320–1987. The uncertainties in magnitude estimates and threshold of completeness were taken into account. The hazard parameter determination is performed for two study areas. The first area, Gulf of Suez, has higher seismicity level than the second, all other active zones in Egypt.b-values of 1.2 ± 0.1 and 1.0 ± 0.1 are obtained for the two areas, respectively. The number of annually expected earthquakes with magnitude 3 is much larger in the Gulf of Suez, 39 ± 2 than in the other areas, 6.1 ± 0.5. The maximum expected magnitude is calculated to be 6.5 ± 0.4 for a time span of 209 years for the Gulf of Suez and 6.1 ± 0.3 for a time span of 1667 years for the remaining active areas in Egypt. Respective periods of 10 and 20 years were reported for earthquakes of magnitude 5.0 for the two subareas.     

Early Cretaceous volcaniclastic and quartzose sandstones from north central Nepal: composition,sedimentology and geotectonic significance

Early Cretaceous sandstones and shales from the Thakkhola region (Chukh and Tangbe Formations) were deposited on the subsiding northern (Tethyan) margin of Gondwana; current directions indicate a source area to the south. Whereas the Berriasian Chukh Formation is dominated by quartz arenites, volcaniclastic sandstones and minor conglomerates dominate the Tangbe Formation of Valanginian to Aptian age. Upsection, the composition of the volcaniclastic components changes from mainly basaltic to dominantly dacitic/rhyolitic. Magmatism was preceded and accompanied by strong uplift in the source area of the Chukh and Tangbe clastics, resulting in the erosion of probably more than several hundred meters of pre-Cretaceous sedimentary, metamorphic and plutonic rocks. A geochemical whole rock analysis of basaltic pebble fragments shows their alkaline character and suggests a within-plate geotectonic setting for the volcanic source. This volcanotectonic event is probably related to rifting between Australia and Greater India, where seafloor spreading began in late Valanginian/Hauterivian times.     

Simco,a simulation software for CONICA,the coude nir camera for the very large telescope

CONICA is an acronym for COudé Near Infrared Camera. It is one of the four currently planned Infrared instruments for ESO's Very Large Telescope (VLT) in Chile. This multimode instrument is to be installed at the Coudé-focus (of Unit Telescope no. 1), where adaptive optics and speckle interferometry will also be available. High angular resolution imaging (to the diffraction limit) will be possible in the 1–5 m range, as well as spectroscopy with low- and medium resolution and polarimetry by means of Wollaston prism and wiregrid analysers. Various softwares are developed for this instrument. One of them: the Simulation Software has a threefold aim: 1. provide the user with feedback information on his/her choices of observational parameters. This is be achieved by displaying the calculated performance and throughput of the combined Source-Atmosphere-Telescope-Camera-Detector system in various formats, such as images, tables, isophotical images ... for point as well as for extended sources (also annular, double, etc.); 2. verify if his expectations are realistic, before actually using CONICA itself. 3. give feedback on the design to the developers of the instrument.On leave from his original institute, now at ESTEC in the ISO-project     

The “Zero-order Model” revisited: Paul Schindler's influence on the development of trace metal scavenging models

In 1975 Paul Schindler produced the first oceanic trace metal scavenging model to explicitly include the role of surface chemistry as a control on trace metal water column residence times. The eighteen years that have elapsed since the publication of Schindler's seminal paper have seen the development of a variety of oceanic scavenging models; yet, the fundamental insight of his Zero-order Model remains the benchmark. This paper describes the role of Paul Schindler's work on surface chemistry in providing a framework for the current generation of trace element scavenging models.     

Fossil carotenoids and paleolimnology of meromictic Mahoney Lake,British Columbia,Canada

Vertical distribution of fossil carotenoids in a sediment core from meromictic Mahoney Lake was studied. Besides okenone and demethylated okenone, lutein and zeaxanthin and-carotene isomers were identified. No carotenoids typical for purple nonsulfur or green sulfur bacteria were detected. The ratio of zeaxanthin to lutein (above 1:1 in all samples) indicates a dominance of cyanobacteria over green algae in the phytoplankton assemblages of the past. Okenone, which is found exclusively in Chromatiaceae, was the dominating carotenoid in all sediment zones.The oldest sediment layers containing okenone were deposited 11 000 years ago. Between 9000 and 7000 and since 3000 years b.p., Chromatiaceae reached a considerable biomass in the lake. Vertical changes in okenone concentration were not related to changes of paleotemperatures. In contrast, okenone concentrations decreased during periods of volcanic ash input. During most of the lake history, however, mean okenone concentrations were positively correlated with sedimentation rates. This indicates that vertical changes of okenone concentration in the sediment reflect past changes of purple sulfur bacterial biomass in the lake.According to these results, the past limnology of Mahoney Lake resembled that of the present with a sulfide-containing monimolimnion and a well-developed population of okenone-bearing purple sulfur bacteria.