Methodology for construction, calibration and validation of a national hydrological model for Denmark

An integrated groundwater/surface water hydrological model with a 1 km² grid has been constructed for Denmark covering 43,000 km². The model is composed of a relatively simple root zone component for estimating the net precipitation, a comprehensive three-dimensional groundwater component for estimating recharge to and hydraulic heads in different geological layers, and a river component for streamflow routing and calculating stream–aquifer interaction. The model was constructed on the basis of the MIKE SHE code and by utilising comprehensive national databases on geology, soil, topography, river systems, climate and hydrology. The present paper describes the modelling process for the 7330 km² island of Sjælland with emphasis on the problems experienced in combining the classical paradigms of groundwater modelling, such as inverse modelling of steady-state conditions, and catchment modelling, focussing on dynamic conditions and discharge simulation. Three model versions with different assumptions on input data and parameter values were required until the performance of the final, according to pre-defined accuracy criteria, model was evaluated as being satisfactory. The paper highlights the methodological issues related to establishment of performance criteria, parameterisation and assessment of parameter values from field data, calibration and validation test schemes. Most of the parameter values were assessed directly from field data, while about 10 ‘free’ parameters were subject to calibration using a combination of inverse steady-state groundwater modelling and manual trial-and-error dynamic groundwater/surface water modelling. Emphasising the importance of tests against independent data, the validation schemes included combinations of split-sample tests (another period) and proxy-basin tests (another area).     

A New Enantiornithes (Aves) from the Early Cretaceous of China

A new bird from the early Cretaceous Yixian Formation of Liaoning, China is described. This new species, Grabauornis lingyuanensis, shares several synapomorphies with the Enantiornithes. The specimen is relatively well preserved. The skeletal morphology of Grabauornis bears close resemblance to that of other Chinese members of this clade. The brachial index （the ratio between the lengths of humerus and ulna） is 0.95, which is close to the average for enantiornithine birds. It indicates that Grabauornis was a rather good flyer, and the presence of an alula in the wing further testifies to this.     

Gridded Croatian climatology for 1961–1990

In climatology, one of the most important pieces of information about the climate of a place or a region is information about the Climatological Normals (CLINO)—the average values of meteorological elements for a 30-year period. This kind of information usually comes in tables and is available for different observation sites from national meteorological services or from World Meteorological Organisation publications. The key issue, then, becomes how to interpolate these values over the entire area of interest to get reliable and accurate estimates (maps) of climatic elements. Here, the regression kriging framework has been applied for mapping of 20 climatological parameters for the 1961–1990 period for the 56,594 km² of Croatian territory, with a resolution of 1 km. In total, 152 main and climatological and 567 precipitation-measuring stations have been used in the analysis. Extensive pre-processing of metadata on station co-ordinates has been done, as well as completion of missing monthly averages. The final results are 20 climatological maps available in high resolution together with error maps and accuracy assessment measures.     

Simulation of nonlinear wave run-up with a high-order Boussinesq model

This paper considers the numerical simulation of nonlinear wave run-up within a highly accurate Boussinesq-type model. Moving wet–dry boundary algorithms based on so-called extrapolating boundary techniques are utilized, and a new variant of this approach is proposed in two horizontal dimensions. As validation, computed results involving the nonlinear run-up of periodic as well as transient waves on a sloping beach are considered in a single horizontal dimension, demonstrating excellent agreement with analytical solutions for both the free surface and horizontal velocity. In two horizontal dimensions cases involving long wave resonance in a parabolic basin, solitary wave evolution in a triangular channel, and solitary wave run-up on a circular conical island are considered. In each case the computed results compare well against available analytical solutions or experimental measurements. The ability to accurately simulate a moving wet–dry boundary is of considerable practical importance within coastal engineering, and the extension described in this work significantly improves the nearshore versatility of the present high-order Boussinesq approach.     

Mangrove expansion and rainfall patterns in Moreton Bay, Southeast Queensland, Australia

Changes in rainfall pattern have been suggested as a mechanism for the landward incursion of mangrove into salt marsh. The aim of the research was to assess the relationship between rainfall patterns and the spatial distribution of mangrove forests at study sites in Moreton Bay, Southeast Queensland, Australia, over a 32-year period from 1972 to 2004. To identify periods of relatively consistent rainfall patterns points at which rainfall patterns changed (change-points) were identified using the non-parametric Pettitt–Mann–Whitney-Statistic and the cumulative sum technique. The change-points were then used to define the temporal periods over which changes to mangrove area were assessed. Both mangrove and salt marsh area were measured by digitizing aerial photographs acquired in 1972, 1990 (the year with the most significant change-point), and 2004. The rates of change in mangrove area pre-1990 (a wetter period) and post-1990 (a drier period) were estimated. A significant positive relationship was demonstrated between rainfall variables and landward mangrove expansion, but not for seaward expansion. We concluded that rainfall variability is one of the principal factors influencing the rate of upslope encroachment of mangrove. However, the rate of expansion may vary from site to site due to site-specific geomorphological and hydrological characteristics and the level of disturbance in the catchment.     

Solution chemistry studies and flotation behaviour of apatite,calcite and fluorite minerals with sodium oleate collector

The maximum flotation response for three naturally occurring calcium minerals, apatite, calcite and fluorite with sodium oleate collector correlated directly with the minimum interfacial tension of the air/solution interface. For fluorite and apatite the minimum surface tension occurred about the mid-pH region and was attributed to the formation of pre-micellar associated species in solution. In the case of calcite the minimum was observed at high pH since the presence of high concentrations of calcium ions in solution appeared to reduce the concentration of amphililic species in the low and mid-pH regions.Microelectrophoresis data demonstrated that the three minerals acquired a negative charge in sodium oleate solution, resulting from adsorption of oleate species on the mineral surfaces.The flotation behaviour of the systems were shown to be related to the species distribution diagrams suggesting that the role of the acid soap dimer, soap dimer, molecular and lattice species could make a significant contribution to the character and composition of the interfacial films.High flotation response was explained by strong adhesion between the hydrophobic particle and bubble. It was suggested that the reduction in surface tension may not be the major factor contributing to the flotation efficiency but indicated the presence of associated surfactant species in solution which could also synergistically adsorb at the solid/liquid interface, increasing the hydrophobic character of the mineral surface. This would maximize the magnitude of the contact angle and hence the strength of the adhesion between particle and bubble. This adsorption behaviour is not in general agreement with conventionally non-hydrolyzable collector theory which is usually based on electrostatic models.     

Die nordschwedischen Eisenerze und verwandte Lagerstätten als Beispiele eruptiver Spaltungsprozesse

Zusammenfassung Seit einem früheren Stadium der geologischen Erforschung der nordschwedischen Eisenerzlagerstätten vom Typus Kiruna — meistens apatitreiche Magnetiterze — war es den damit beschäftigten Forschern klar, daß die Substanz der Erze im magmatischen Stadium von dem Magma der begleitenden Porphyrgesteine abgespaltet wurde. Die Natur und die Ursachen dieses Abspaltens müssen nach dem geologischen Befund beurteilt werden, denn es handelt sich um spätmagmatische Ereignisse in einem experimentell noch nicht erforschbaren Gebiet. Mineralparagenese, Struktur, Kontaktverhältnisse usw. deuten auf Kristallisation aus einem an leichtflüchtigen Gemengteilen reichen Magma (pneumotektische Gebilde). Der spätmagmatische oder restmagmatische Charakter der Erzbildung wird auch durch Übergänge nach Erztypen, die bei niedrigeren Temperaturen gebildet sind, klargelegt. Die Trennung zwischen Erz und Gestein erscheint ebenso scharf wie in den Fällen, in denen erzbildende Lösungen gasförmig abgeschieden worden sind. Die Abscheidung muß auch bei den hier behandelten spätmagmatischen Erzen auf die Wirkung der leichtflüchtigen Gemengteile (Magmagase) zurückgeführt werden. Genetisch verwandt sind sulfidische Erze, deren Anknüpfung an den Kirunatypus aus ihrem Apatit- und Magnetitgehalt hervorgeht, und die sich entweder aus pneumotektischen Magmen oder aus gasförmigen Lösungen kristallisierten. Mehr entfernt von der magmatischen Kristallisation folgen gewisse metasomatische Erze ähnlicher Zusammensetzung. Eigentümlicherweise zeigen aber die kontaktmetasomatischen Eisenerze in Kalkstein eine wesentlich andere Zusammensetzung der aus dem Magma stammenden Gemengteile, obgleich auch ihr Material aus dem Magma in Gasform entwich. Besonders auffallend ist der hohe Kieselsäuregehalt und die Seltenheit des Apatits. Diese Eigenschaften findet man auch in den Lagerstätten von diesem Typus, die in demselben Gebiet wie die Kiruna-Erze auftreten, und die mit den dortigen Tiefengesteinen verbunden sind.