Geodynamic constraints on orebody localization in the Anqing orefield, China: Computational modeling and facilitating predictive exploration of deep deposits

The Anqing Fe–Cu skarn deposit, with an age of 134 to 142 Ma and resources of 62.4 Mt at 0.906% Cu and 32.2% Fe, is one of the most important deposits in the Yangtze River Metallogenic Belt, East China. To better understand the localization of orebodies and thus facilitate predictive exploration of deep orebodies, computational modeling is used to simulate the coupled geodynamic processes during the syn-tectonic cooling of the ore-related intrusion, based on geological and geophysical investigations in the Anqing orefield.The occurrences of the ore veins and veinlets in diorite and skarn, as well as the sharp zigzag boundary of the orebody, indicate that the Cu ores were deposited after the solidification of the diorite and skarn formation, and were located in some tensional structural spaces that are unevenly distributed along the contact zone between the felsic intrusion and sedimentary carbonates. The locations of orebodies are closely associated with the contact zone shape. The computational results of two models with two typical contact-shapes show that pore fluid flow was focused into the dilation zones from different sources. All the significant dilation zones, in which the existing orebodies were located, are distributed in some specific places of the south contact zone of the intrusion. In addition, these dilation zones are closely related to the contact zone shape of the intrusion and can control the location of orebodies through the coupled mechano-thermo-hydrological processes during cooling of the intrusion in the extension setting. The skarns are not critical for controlling the localization of orebodies. This means that exploration for deep ore should target deep dilation zones close to the contact boundary of the intrusion. Such recognition may provide a useful guide in selecting exploration targets in the Anqing orefield. As a direct result of computational modeling, an orebody has been discovered in the deep dilation zone in this orefield. It demonstrates that computational modeling is a promising tool for understanding the metallogenic processes and for facilitating the deep exploration of hidden orebodies that are related to intrusions.     

Study on rain-runoff process in the peripheral mountainous area of the Sichuan Basin

Studies on rain-runoff process in the peripheral mountainous area of the Sichuan Basin, which is regarded as a key ecological shelter, will contribute to flood control and environmental protection for the Upper Yangtze River Basin. In two typical catchments--the Fujiang River Catchment and the Wujiang River Catchment, rainfall simulations have been conducted to study the rain-runoff processes of yellow soil and limestone soil in three types of land use--forestland, farmland and grassland. Results showed that （1） within the same rainfall process, overland flow occurs first on farmland, then on grassland, and finally on forestland; （2） soil surface coverage has a great impact on the occurrence and amount of overland flow. The runoff amount can increase 2-4 times after the coverage is removed; （3） the infiltration before the occurrence of overland flow will decrease because of higher gravel contents of soil, but it takes no effect on infiltration once overland flow becomes stable; （4） the runoff coefficient of the limestone soil forestland is greater than that of the yellow soil forest land, but less than that of the farmland; （5） three empirical infiltration models, including Horton＇ model, Kostiakov＇ model, and modified Kostiakov＇ model, were compared by using the observed results under rainfall simulation. The results showed that the Kostiakov＇ model performed better than both the Horton＇ model and modified Kostiakov model. According to the results of this research, the Kostiakov＇s model can be used to simulate rainfall infiltration when water erosion is modeled in the peripheral mountainous area of the Sichuan Basin.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Palaeoenvironmental significance of Late Permian palaeosols in the South‐Eastern Iberian Ranges,Spain

The Late Permian (Wuchiapingian) Alcotas Formation in the SE Iberian Ranges consists of one red alluvial succession where abundant soil profiles developed. Detailed petrographical and sedimentological studies in seven sections of the Alcotas Formation allow six different types of palaeosols, with distinctive characteristics and different palaeogeographical distribution, to be distinguished throughout the South‐eastern Iberian Basin. These characteristics are, in turn, related to topographic, climatic and tectonic controls. The vertical distribution of the palaeosols is used to differentiate the formation in three parts from bottom to top showing both drastic and gradual vertical upwards palaeoenvironmental changes in the sections. Reconstruction of palaeoenvironmental conditions based on palaeosols provides evidence for understanding the events that occurred during the Late Permian, some few millions of years before the well‐known Permian‐Triassic global crisis.     

Mineralogical and Geochemical Constraints on the Sediment Sources of Late Stone Age Pottery from the Birimi Site,Northern Ghana

The mineralogy and bulk chemical compositions of 15 Kintampo (Late Stone Age) potsherds from the Birimi site on the Gambaga Escarpment and eight samples of local sediment were determined with the intent of characterizing these wares and identifying the material used in their manufacture. Sediment from clay pits still used by potters north of the escarpment contains iron‐rich laterite clasts (100 × XFeO_t = 100 × FeO_t/[FeO_t + Al₂O₃ + SiO₂] ≥10). Sedimentary clasts in stream sediments are relatively siliceous and iron‐poor (100 × XFeO_t < 10). Bulk geochemical data together with the compositions of lithic clasts (laterite, siltstone/sandstone) link the pottery to sediment sources, including escarpment sediments not presently used by Ghanaian potters. Fresh granite clasts found in some of the sherds were not found in the analyzed sediment samples, although some of their distinctive mineralogical constituents (e.g., variably barian alkali feldspar) are present. The analytical data suggest that pots found at Birimi were made locally by mixing escarpment sediment with clay and stream sediment brought in from below the escarpment. This contrasts with present‐day practice, whereby the pots themselves are imported. The place where Birimi pottery was made and the outcrop source of aluminous sediment (mudstone with an “escarpment” trace element signature) used in these wares, however, remain unidentified. © 2013 Wiley Periodicals, Inc.     

化学与稳定同位素指纹示踪原油类污染:以广东南海两次小型溢油事件为例

化学和稳定同位素指纹是目前国际上用于示踪石油类污染来源及其环境命运的有效技术。通过气相色谱-质谱(GC—MS)分析可疑重油与被污染水体及植物表面污染物的饱和烃和芳烃分布以及生物标志化合物姥姣烷、植烷、“不可分辨的混合物”(UCM)等化学指纹特征,对比可疑重油与被污染水体表面漂浮重油的沥青质同位素组成,追踪了发生在广东省南海市的两次小型重油泄漏事件。结果揭示,2002年10月16日晚发生的污染事件源于某饲料公司锅炉房的重油泄漏;而2002年10月25日的泄漏事故则是某加油站重油渗漏所致。     

开敞水域中航槽流场的数值模拟

建立了一个模拟开敞水域中航槽流场的平面二维数学模型.利用该模型计算得到的流速分布与袁美琦、李安中等人试验值相吻合,并计算了相当于天然情况下(各种水深、挖深比及航槽与水流的不同交角)的流场,得到了各种航槽与水流交角、不同挖深比的航槽流速折减系数变化规律图,及各种航槽与水流交角、不同挖深比的航槽中流向与航槽轴线交角的变化规律图,为开敞水域中航槽选线设计提供了依据.     

地下水位升降与空气流耦合的砂柱实验及其模拟

地下水位的上升或下降会驱动包气带中的空气流动,并与水位升降运动发生相互作用.当潜水含水层被低渗透介质覆盖时,这种水位升降与空气流的耦合现象更加明显.利用细砂盖层作为低渗透介质与厚层粗砂组合成双层结构砂柱,进行了注水和排水实验研究.在排水实验中砂柱水位面下降,包气带会形成显著真空,吸取外界大气.在注水实验中砂柱水位面抬升,包气带气压增大,空气向外流动.包气带气压随时间的变化曲线呈单峰形式,且受到细砂盖层厚度的影响.考虑砂柱饱水带的Darcy流和包气带可压缩空气的线性渗流,提出了一个描述砂柱水-气运动的简化动力学模型,通过Runge-Kutta法进行实验过程的数值模拟,重现了观测到的包气带气压变化特征.模拟结果表明,包气带气压的极值随着低渗透盖层厚度的增加而呈非线性增大趋势.     

Soft‐sediment deformation structures in a Pleistocene glaciolacustrine delta and their implications for the recognition of subenvironments in delta deposits

The development of soft‐sediment deformation structures in clastic sediments is now reasonably well‐understood but their development in various deltaic subenvironments is not. A sedimentological analysis of a Pleistocene (ca 13·1 to 15 ¹⁰Be ka) Gilbert‐type glaciolacustine delta with gravity‐induced slides and slumps in the Mosty‐Danowo tunnel valley (north‐western Poland) provides more insight, because the various soft‐sediment deformation structures in these deposits were considered in the context of their specific deltaic subenvironment. The sediments show three main groups of soft‐sediment deformation structures in layers between undeformed sediments. The first group consists of deformed cross‐bedding (inclined, overturned, recumbent, complex and sheath folds), large‐scale folds (recumbent and sheath folds) and pillows forming plastic deformations. The second group comprises pillar structures (isolated and stress), clastic dykes with sand volcanoes and clastic megadykes as examples of water‐escape structures. The third group consists of faults (normal and reverse) and extensional fissures (small fissures and neptunian dykes). Some of the deformations developed shortly after deposition of the deformed sediment, other structures developed later. This development must be ascribed to hydroplastic movement in a quasi‐solid state, and due to fluidization and liquefaction of the rapidly deposited, water‐saturated deltaic sediments. The various types of deformations were triggered by: (i) a high sedimentation rate; (ii) erosion (by wave action or meltwater currents); and (iii) ice‐sheet loading and seasonal changes in the ablation rate. Analysis of these triggers, in combination with the deformational mechanisms, have resulted – on the basis of the spatial distribution of the various types of soft‐sediment deformation structures in the delta under study – in a model for the development of soft‐sediment deformation structures in the topsets, foresets and bottomsets of deltas. This analysis not only increases the understanding of the deformation processes in both modern and ancient deltaic settings but also helps to distinguish between the various subenvironments in ancient deltaic deposits.