The Cretaceous–Tertiary boundary in southern low-latitude regions: preliminary study in Pernambuco, northeastern Brazil

A preliminary integrated study of a Cretaceous-Tertiary (K/T) boundary section in Pernambuco, northeastern Brazil, provides evidence for an extraterrestrial bolide impact in the earliest Danian. A non-graded, nodular carbonate mudstone/wackestone bed is interpreted as a slump or a mud Flow deposit, induced by a tsunami event or by a gravity mass movement during a sea-level lowstand, the former possibly generated by the K/T boundary Yucatán impact. This bed overlies marlstones deposited in an upper bathyal environment and marks the top of the Cretaceous. Nearly all known latest Maastrichtian planktonic foraminifera are recovered from the Cretaceous strata. Iridium shows a marked peak in a thin hemipelagic claystone layer, about 75 cm above the K/T boundary, deposited in a middle to deep neritic environment. The claystone overlies alternating beds of finegrained limestones and marlstones and a 50 cm-thick graded bioclastic packstone, which rests upon a marly limestone breccia of the lowermost Danian. Abundant reworked Cretaceous and rare lowermost Danian microfossils (e.g. E. edita, E. eobulloides, E. fringa, G. irregularis, P. eugubina, P. cf. pseudobulloides, W. claytonensis and W. hornerstownensis ) have been recovered from these strata. These lowermost Danian beds record the sudden appearance of abundant shock-metamorphosed quartz grains, with several sets of intersecting deformation lamellae and microtektite-like microspherules. This suggests that these deposits were formed by an additional tsunami caused by a second impact event in the earliest Danian, near or at the boundary between the Palaeocene P α and P 1a foraminiferal zones. Impact-derived material has not been found in the uppermost Cretaceous beds.     

Characterization of a chalcopyrite from Brazil by Mössbauer spectroscopy and other physicochemical techniques

We studied a chalcopyrite from a Cu ore deposit in Rio Grande do Sul, Brazil, by Mössbauer spectroscopy at room temperature and 110 K. Supporting methods to check for sample purity and to characterize further sample properties were slow-scanning X-ray powder diffraction and optical and microprobe analyses of polished sections of selected grains. Chemical analyses obtained using a scanning electron microscope equipped with an energy-dispersive X-ray spectrometer showed the sample to consist of homogeneous and essentially stoichiometric chalcopyrite (CuFeS₂). Mössbauer spectra taken at both the above temperatures consist of asymmetric magnetically ordered patterns with unequal intensities of the line pairs 1–6 and 2–5, pointing to the existence of non-equivalent or multiple Fe sites. Least-squares fittings evidenced that the resonance intensity ratio of subspectrum with lower quadrupole shift (indicative of a more symmetric environment) to that with higher shift is 69:31, at room temperature, and 68:32, at 110 K. Rietveld refinement of the XRD data indicates the existence of tetragonal [a = 0.52855(1) and c = 1.0412(1) nm] and cubic [a ₀ = 0.5273(2) nm] modifications in a proportion of 74:26, in good agreement with the Mössbauer data. The saturation magnetization of the sample was 32.7 J/(T kg), confirming the oxidation state of Fe as trivalent and pointing to little to no spin canting.     

Modeling monthly mean air temperature for Brazil

Air temperature is one of the main weather variables influencing agriculture around the world. Its availability, however, is a concern, mainly in Brazil where the weather stations are more concentrated on the coastal regions of the country. Therefore, the present study had as an objective to develop models for estimating monthly and annual mean air temperature for the Brazilian territory using multiple regression and geographic information system techniques. Temperature data from 2,400 stations distributed across the Brazilian territory were used, 1,800 to develop the equations and 600 for validating them, as well as their geographical coordinates and altitude as independent variables for the models. A total of 39 models were developed, relating the dependent variables maximum, mean, and minimum air temperatures (monthly and annual) to the independent variables latitude, longitude, altitude, and their combinations. All regression models were statistically significant (α?≤?0.01). The monthly and annual temperature models presented determination coefficients between 0.54 and 0.96. We obtained an overall spatial correlation higher than 0.9 between the models proposed and the 16 major models already published for some Brazilian regions, considering a total of 3.67?×?10⁸?pixels evaluated. Our national temperature models are recommended to predict air temperature in all Brazilian territories.     

Concurrent imaging of chlorophyll fluorescence,Chlorophyll a content and green fluorescent proteins‐like proteins of symbiotic cnidarians

Research on photosynthetic cnidarians has been mainly focused on the symbiosis established between the cnidarian host and its dinoflagellates endosymbionts from genus Symbiodinium. Despite the potential of imaging techniques for assessing the spatial distribution of key parameters of cnidarian photobiology, such as photochemical activity, chlorophyll a content or green fluorescent proteins (GFPs), to our best knowledge, no study has ever attempted to simultaneous map these three features. In this study, we developed a modified imaging pulse amplitude fluorometer by applying excitation light of different wavelengths and selectively detecting short spectral bands through bandpass filters. The imaging system was used to sequentially excite and quantify chlorophyll variable fluorescence (maximum quantum yield of photosystem II, F_v/F_m), Chl a content (normalized difference vegetation index) and relative content of GFPs. The spatial distribution of these photophysiological parameters was mapped both horizontally, across the surface of the soft corals Sarcophyton cf. glaucum and Sinularia flexibilis and the zoanthid Protopalythoa sp., and vertically, throughout a vertical section of S. cf. glaucum. Results showed bleached areas within each individual coral colony and registered photophysiological changes with S. cf. glaucum tissue depth. Analysis of Protopalythoa sp. polyps’ expansion revealed differential surface patterns of NDVI and GFP concentration, and a negative relation between these latter parameters within each polyp. This novel non‐invasive approach allowed a high‐resolution characterization of the spatial relationship between these key parameters through the analysis of image information on a pixel‐by‐pixel basis, which has great potential for investigating the physiological state of symbiotic associations.     

Morphology of Lonar Crater,India: Comparisons and implications

Lonar Crater is a young meteorite impact crater emplaced in Deccan basalt. Data from 5 drillholes, a gravity network, and field mapping are used to reconstruct its original dimensions, delineate the nature of the pre-impact target rocks, and interpret the emplacement mode of the ejecta. Our estimates of the pre-erosion dimensions are: average diameter of 1710 m; average rim height of 40 m (30–35 m of rim rock uplift, 5–10 m of ejected debris); depth of 230–245 m (from rim crest to crater floor). The crater's circularity index is 0.9 and is unlikely to have been lower in the past. There are minor irregularities in the original crater floor (present sediment-breccia boundary) possibly due to incipient rebound effects. A continuous ejecta blanket extends an average of 1410 m beyond the pre-erosion rim crest.In general, fresh terrestrial craters, less than 10 km in diameter, have smaller depth/diameter and larger rim height/diameter ratios than their lunar counterparts. Both ratios are intermediate for Mercurian craters, suggesting that crater shape is gravity dependent, all else being equal. Lonar demonstrates that all else is not always equal. Its depth/diameter ratio is normal but, because of less rim rock uplift, its rim height/diameter ratio is much smaller than both fresh terrestrial and lunar impact craters. The target rock column at Lonar consists of one or more layers of weathered, soft basalt capped by fresh, dense flows. Plastic deformation and/or compaction of this lower, incompetent material probably absorbed much of the energy normally available in the cratering process for rim rock uplift.A variety of features within the ejecta blanket and the immediately underlying substrate, plus the broad extent of the blanket boundaries, suggest that a fluidized debris surge was the dominant mechanism of ejecta transportation and deposition at Lonar. In these aspects, Lonar should be a good analog for the fluidized craters of Mars.     

Sequential melting and fractional crystallization: Granites from Guarda-Sabugal area, central Portugal

Seven distinct phases of Variscan two-mica granite are recognized in the Guarda-Sabugal area. They intruded the Cambrian schist-metagraywacke complex, crystallized in the middle crust, and are syn- to late-D3 (309.2 ± 1.8 Ma), late-D3 (304–300 Ma) and late- to post-D3 (299 ± 3 Ma; ID-TIMS ages on zircon and monazite). Two of the granites, G2 and G5, are close in age and have similar Sr, Nd and O isotope characteristics but contrasting whole rock and mineral features and formed by sequential increasing degree of partial melting of a common metasedimentary protolith. During sequential melting Ti, total Fe, Mg, Ca, Zr, Zn, Sr, Ba and REE contents and (La/Yb)_N increase and Si and Rb contents decrease, plagioclase becomes richer in anorthite and biotite and muscovite richer in Ti and Mg. Each of these granites evolved subsequently by fractional crystallization of quartz, K-feldspar, plagioclase, biotite and ilmenite, defining separate series G2–G3–G7 and G5–G6 containing late Sn-bearing differentiates. Two other granites G1 and G4 represent distinct pulses of magma with individual fractionation trends for major and trace elements and distinct (⁸⁷Sr/⁸⁶Sr)₃₀₀, ?Nd₃₀₀ and δ¹⁸O values.     

K–Ar and Ar/Ar ages of dikes emplaced in the onshore basement of the Santos Basin, Resende area, SE Brazil: implications for the south Atlantic opening and Tertiary reactivation

New K–Ar and ⁴⁰Ar/³⁹Ar data of tholeiitic and alkaline dike swarms from the onshore basement of the Santos Basin (SE Brazil) reveal Mesozoic and Tertiary magmatic pulses. The tholeiitic rocks (basalt, dolerite, and microgabbro) display high TiO₂ contents (average 3.65 wt%) and comprise two magmatic groups. The NW-oriented samples of Group A have (La/Yb)_N ratios between 15 and 32.3 and range in age from 192.9±2.2 to 160.9±1.9 Ma. The NNW-NNE Group B samples, with (La/Yb)_N ratios between 7 and 16, range from 148.3±3 to 133.9±0.5 Ma. The alkaline rocks (syenite, trachyte, phonolite, alkaline basalts, and lamprophyre) display intermediate–K contents and comprise dikes, plugs, and stocks. Ages of approximately 82 Ma were obtained for the lamprophyre dikes, 70 Ma for the syenite plutons, and 64–59 Ma for felsic dikes. Because Jurassic–Early Cretaceous basic dikes have not been reported in SE Brazil, we might speculate that, during the emplacement of Group A dikes, extensional stresses were active in the region before the opening of the south Atlantic Ocean and coeval with the Karoo magmatism described in South Africa. Group B dikes yield ages compatible with those obtained for Serra Geral and Ponta Grossa magmatism in the Paraná Basin and are directly related to the breakup of western Gondwana. Alkaline magmatism is associated with several tectonic episodes that postdate the opening of the Atlantic Ocean and related to the upwelling of the Trindade plume and the generation of Tertiary basins southeast of Brazil. In the studied region, alkaline magmatism can be subdivided in two episodes: the first one represented by lamprophyre dykes of approximately 82 Ma and the second comprised of felsic alkaline stocks of approximately 70 Ma and associated dikes ranging from 64 to 59 Ma.

Resumo

Novos dados K–Ar e ⁴⁰Ar/³⁹Ar de enxames de diques toleíticos e alcalinos localizados no embasamento onshore da Bacia de Santos (SE Brasil) apontam para diferentes pulsos magmáticos ocorridos entre o Jurássico e o Terciário. Os diques de rochas toleíticas (basalto, diabásio e microgabro), são mais velhos, exibem altos teores de TiO₂ (3,65% peso na média) e podem ser subdivididos em dois grupos magmáticos. O Grupo A aflora a norte da Bacia de Resende, compreende diques orientados na direção NW, com razões (La/Yb)_N entre 15 e 32,3, e idades entre 192.9±2.2 e 160.9±1.9 Ma. O Grupo B aflora a sul e a leste da Bacia de Resende, engloba diques orientados na direção NNW e NNE, com razões (La/Yb)_N entre 7 e 16, e idades obtidas entre 148.3±3 e 133.9±0.5 Ma. As rochas alcalinas (sienito, traquito, fonolito, basalto alcalino e lamprófiro) possuem teores médios de K, e afloram como diques, plugs e stocks.. As idades obtidas são de ca. 82 Ma para os diques lamprofíricos, de ca. 70 Ma para os plugs sieníticos, e entre 64 e 59 Ma para os diques félsicos. Como estas idades Jurássicas para diques toleíticos ainda não foram descritas para a região sudeste do Brasil, pode-se especular que durante o emplacement dos diques do GrupoA o cenário tectônico indicaria esforços extensionais anteriores à abertura do Oceano atlântico Sul, e contemporânea ao derrame basáltico do Karoo na África do Sul. Já os diques do Grupo B são contemporâneos ao magmatismo Serra Geral e ao enxame de diques de Ponta Grossa, e portanto este episódio está diretamente relacionado à separação entre o Brasil e África no Cretáceo. O magmatismo alcalino está associado a diversos episódios tectônicos que sucedem à abertura do Oceano Atlântico Sul e que resultaram no desenvolvimento das Bacias terciárias do sudeste brasileiro. Está provavelmente relacionado à chegada da Pluma de Trindade e as idades obtidas para a região em estudo indicam que o magmatismo lamprofírico é mais antigo (ca. 82 Ma), seguido pelos plútons sieníticos (ca. 70 Ma) e diques associados (64 a 59 Ma.)     

Positive solution of two-dimensional solute transport in heterogeneous aquifers

The transport of contaminants in aquifers is usually represented by a convection-dispersion equation. There are several well-known problems of oscillation and artificial dispersion that affect the numerical solution of this equation. For example, several studies have shown that standard treatment of the cross-dispersion terms always leads to a negative concentration. It is also well known that the numerical solution of the convective term is affected by spurious oscillations or substantial numerical dispersion. These difficulties are especially significant for solute transport in nonuniform flow in heterogeneous aquifers. For the case of coupled reactive-transport models, even small negative concentration values can become amplified through nonlinear reaction source/sink terms and thus result in physically erroneous and unstable results. This paper includes a brief discussion about how nonpositive concentrations arise from numerical solution of the convection and cross-dispersion terms. We demonstrate the effectiveness of directional splitting with one-dimensional flux limiters for the convection term. Also, a new numerical scheme for the dispersion term that preserves positivity is presented. The results of the proposed convection scheme and the solution given by the new method to compute dispersion are compared with standard numerical methods as used in MT3DMS.     

Ideal width of transects for monitoring source-related categories of plastics on beaches

Although there is a consensus on the necessity of monitoring solid wastes pollution on beaches, the methods applied vary widely. Therefore, creating, testing and recommending a method that not only allows comparisons of places and periods, but also the detection of source signals, will be important to reach the objectives of the source-prevention principle. This will also allow the optimisation of time, resources, and processing of samples and data. A classification of the items found into specific categories was made according to their most probable source/use (fisheries, food packaging, hazardous, sewage/personal hygiene, beach user, general home). This study tested different widths of sampling transects to be used in the detection of plastics contamination on beaches, until all the categories were significantly represented. Each transect had its total width (50m) sub-divided into eight intervals of 0-2.5m; 2.5-5m; 5-10m; 10-15m; 15-20m; 20-30m; 30-40m; and 40-50m. The accumulated number of categories in the 50m (up to 2.5m; up to 5m and so on) was used to determine the minimal width necessary to qualitatively characterize the area regarding plastics contamination. The diversity of the categories was directly related to the area of the sampling transect. These results indicate that a significant increase in the number of categories in the first intervals tend to stabilize from 15-20m onwards.     

The use of the marine biotic index AMBI in the assessment of the ecological status of the Obidos lagoon (Portugal)

This study reports the longitudinal distribution of sediment properties, including inorganic and organic contaminants, and the structure of the benthic community in Obidos lagoon, a coastal system permanently connected to the sea and with negligible freshwater sources. Sediments from the upper to central lagoon consist of fine particles (91%) and from the lower lagoon of sands (94%). Chemical composition is strongly correlated to the percentage of fine particles. Contamination is relatively low in those sediments suggesting the effect of diffuse sources. The increase in organic matter content from down- to upstream areas was associated with the dominance of opportunistic species, while sensitive and indifferent species to organic enrichment were mainly associated to the clean sandy downstream area. The marine biotic index (AMBI) was suitable for the discrimination of the biological and environmental gradients in the Obidos lagoon and was highly related with the gradient of organic matter content in this system.