Mathiasite-loveringite and priderite in mantle xenoliths from the Alto Paranaíba Igneous Province,Brazil: genesis and constraints on mantle metasomatism

Alkali-bearing Ti oxides were identified in mantle xenoliths enclosed in kimberlite-like rocks from Limeira 1 alkaline intrusion from the Alto Paranaíba Igneous Province, southeastern Brazil. The metasomatic mineral assemblages include mathiasite-loveringite and priderite associated with clinopyroxene, phlogopite, ilmenite and rutile. Mathiasite-loveringite (55–60 wt.% TiO₂; 5.2–6.7 wt.% ZrO₂) occurs in peridotite xenoliths rimming chromite (～50 wt.% Cr₂O₃) and subordinate ilmenite (12–13.4 wt.% MgO) in double reaction rim coronas. Priderite (Ba/(K+Ba)< 0.05) occurs in phlogopite-rich xenoliths as lamellae within Mg-ilmenite (8.4–9.8 wt.% MgO) or as intergrowths in rutile crystals that may be included in sagenitic phlogopite. Mathiasite-loveringite was formed by reaction of peridotite primary minerals with alkaline melts. The priderite was formed by reaction of peridotite minerals with ultrapotassic melts. Disequilibrium textures and chemical zoning of associated minerals suggest that the metasomatic reactions responsible for the formation of the alkali-bearing Ti oxides took place shortly prior the entrainment of the xenoliths in the host magma, and is not connected to old (Proterozoic) mantle enrichment events.     

Petrogenesis of a voluminous Quaternary adakitic volcano: the case of Baru volcano

The origin of adakite magmas remains controversial because initially the term adakite had petrogenetic significance implying an origin by direct melting of the eclogitized subducting oceanic crust. Many models have been produced for their origin, and until now there has not been a straightforward method to discriminate between these models in a given adakite suite. Here, we use detailed chronological and geochemical studies of selected adakitic edifices that allows for the determination of the magmatic output rate parameter (Qe), which has been correlated with the rates of magma generation deep within subduction zones. By providing temporal and eruption rate estimates, we provide constraints on the possible petrogenetic processes involved in the generation of adakite-like signatures. Adakite magmas derived from the melting of the subducting slab should be volumetrically insignificant when compared to the adakite-like magmas produced by typical arc magma generation processes. In this study, we use this observation and the extraordinary stratigraphic exposure from Miocene to present in an adakitic volcano in Panama and to study the temporal and chemical variation in erupted magmas to estimate rates of magma generation. Detailed chemical and geochronological analyses of Baru volcano indicate that the volcanic edifice was constructed in its entirety during the Quaternary and magmas display adakite-like features such as steep rare earth elements patterns, pronounced depletions in the heavy rare earth elements, low Y, high Sr, and high Sr/Y. The magmatic output rates (Qe) that we have calculated show that compared to other typical adakitic volcanoes, most of the volcanic edifice of Baru volcano was constructed extremely rapidly (<~213 k.a.) and in time frames that are similar to typical arc volcanoes. The observed chemical and mineralogical variation, coupled with the high magma production rates, indicate that Baru volcano is more representative of a typical arc volcano than a small-volume melt of the subducting oceanic crust. The technique we outline may have broader application in determining the petrogenetic conditions of other adakite suites.     

A Middle Miocene carbonate embankment on an active volcanic slope: Ilhéu de Baixo,Madeira Archipelago,Eastern Atlantic

Carbonate factories on insular oceanic islands in active volcanic settings are poorly explored. This case study illuminates marginal limestone deposits on a steep volcanic flank and their recurring interruption by deposits linked to volcaniclastic processes. Historically known as Ilhéu da Cal (Lime Island), Ilhéu de Baixo was separated from Porto Santo, in the Madeira Archipelago, during the course of the Quaternary. Here, extensive mines were tunnelled in the Miocene carbonate strata for the production of slaked lime. Approximately 10 000 m³ of calcarenite (−1 to 1ø) was removed by hand labour from the Blandy Brothers mine at the south end of the islet. Investigations of two stratigraphic sections at opposite ends of the mine reveal that the quarried material represents an incipient carbonate ramp developed from east to west and embanked against the flank of a volcanic island. A petrographic analysis of limestones from the mine shows that coralline red algae from crushed rhodoliths account for 51% of all identifiable bioclasts. This material was transported shoreward and deposited on the ramp between normal wave base and storm wave base at moderate depths. The mine's roof rocks are formed by Surtseyan deposits from a subsequent volcanic eruption. Volcaniclastic density flows also are a prevalent factor interrupting renewed carbonate deposition. These flows arrived downslope from the north and gradually steepened the debris apron westwards. Slope instability is further shown by a coral rudstone density flow that followed from growth of a coral reef dominated by Pocillopora madreporacea (Lamarck), partial reef collapse, and transport from a more easterly direction into a fore‐reef setting. The uppermost facies represents a soft bottom at moderate depths in a quiet, but shore‐proximal setting. Application of this study to a broader understanding of the relationship between carbonate and volcaniclastic deposition on oceanic islands emphasizes the susceptibility of carbonates to dilution and complete removal by density flows of various kinds, in contrast to the potential for preservation beneath less‐disruptive Surtseyan deposits. Copyright © 2013 John Wiley & Sons, Ltd.     

Two paleoecological histories spanning the period of human settlement in southeastern Brazil

The absence of human occupation sites in southeastern Brazil during the mid Holocene has been referred to as the 'Archaic Gap' (8970–1940 cal. a BP) and is predicted to have resulted from increased aridity. A ca. 14 000 cal. a pollen history from two well‐dated lake sediment cores located within the archeological district of Lagoa Santa, in the State of Minas Gerais, southeastern Brazil, was used to test this hypothesis. Our analyses indicated that the present cerrado and tropical semi‐deciduous forest mosaic persisted throughout the mid Holocene, until ca. 5500 cal. a BP, and the Lagoa Santa region did not experience especially dry conditions during the Holocene period. The early Holocene pollen spectra contained an assemblage of cold‐adapted taxa such as Podocarpus, Myrsine and Araucaria, co‐occurring with taxa from cerrado, e.g. Caryocar. A replacement of cold taxa by the modern cerrado–semi‐deciduous forest vegetation took place progressively, but appears to have been completed by the mid Holocene. No evidence of sustained drought was found in sedimentation or forest composition, nor any prolonged dry event in the study region. Holocene dryness as an explanation for the abandonment of Lagoa Santa region is not supported by the palynological analyses conducted in this study. Rather it is suggested that unpredictable climate may have underlain that abandonment. Copyright © 2012 John Wiley & Sons, Ltd.     

Coastal vulnerability in barrier islands: The high risk areas of the Ria Formosa (Portugal) system

Coastal vulnerability in barrier island systems is extremely high. The barrier island shoreline is exposed to many threats, such as storm erosion, reductions in sediment longshore drift and sea level rise. Many of these threats to coastal areas, such as Ria Formosa, are likely to increase in the near future. The main objectives of the present study are to identify the areas in the system that are at most risk by assessing the evolution of the Ria Formosa barrier island system since the 1940s, and determine which interventions would be necessary to protect these areas.The coastal vulnerability of the system was assessed based on current literature, data available from official institutions, and aerial and terrestrial in situ examination. The results obtained for the evolution of the Ria Formosa coastal system reveal that there are several vulnerable areas that have very dynamic processes, such as extremely high evolution rates of islands and inlets. Human actions that affect the whole system, namely the construction of many physical structures, are the main cause of the instability. Moreover, as several stakeholders are involved, efficient management of the coastal system is imperative. Extensive and careful interventions are urgently needed to avoid irreversible negative impacts on the barrier island system. Three types of techniques could be adopted to deal with the threats to barrier islands: hard stabilization, soft techniques, and non-structural alternatives. However, using hard techniques has many negative effects compared to soft techniques, and as a result it is necessary to remove existing structures from the areas at most risk.     

Jurassic‐to‐present thermal history of the central High Atlas (Morocco) assessed by low‐temperature thermochronology

Apatite fission track (AFT) and (U–Th)/He data from the High Atlas have been obtained for the first time to constrain the tectono‐thermal evolution of the central part of the chain. Results from Palaeozoic basement massifs indicate long residence at low temperatures, consistently with their original location out of the deepest Mesozoic rift troughs and indicating minor exhumation. The best rocks for extracting the Alpine history of the Atlas Mountains are Jurassic intrusives, which yield AFT ages centred on c. 80 Ma; thermal models based on AFT data and constrained by (U–Th)/He suggest that these ages are included in a slow cooling trend from intrusion age to c. 50 Ma ago that we attribute to post‐rift thermal relaxation. This is followed by a stability period of c. 30 Ma and then by a final exhumational cooling until present exposure. Eocene intrusives yield AFT ages similar to those of Rb–Sr and K–Ar suggesting rapid emplacement in the uppermost crust.     

The Cretaceous–Tertiary boundary in southern low-latitude regions: preliminary study in Pernambuco, northeastern Brazil

A preliminary integrated study of a Cretaceous-Tertiary (K/T) boundary section in Pernambuco, northeastern Brazil, provides evidence for an extraterrestrial bolide impact in the earliest Danian. A non-graded, nodular carbonate mudstone/wackestone bed is interpreted as a slump or a mud Flow deposit, induced by a tsunami event or by a gravity mass movement during a sea-level lowstand, the former possibly generated by the K/T boundary Yucatán impact. This bed overlies marlstones deposited in an upper bathyal environment and marks the top of the Cretaceous. Nearly all known latest Maastrichtian planktonic foraminifera are recovered from the Cretaceous strata. Iridium shows a marked peak in a thin hemipelagic claystone layer, about 75 cm above the K/T boundary, deposited in a middle to deep neritic environment. The claystone overlies alternating beds of finegrained limestones and marlstones and a 50 cm-thick graded bioclastic packstone, which rests upon a marly limestone breccia of the lowermost Danian. Abundant reworked Cretaceous and rare lowermost Danian microfossils (e.g. E. edita, E. eobulloides, E. fringa, G. irregularis, P. eugubina, P. cf. pseudobulloides, W. claytonensis and W. hornerstownensis ) have been recovered from these strata. These lowermost Danian beds record the sudden appearance of abundant shock-metamorphosed quartz grains, with several sets of intersecting deformation lamellae and microtektite-like microspherules. This suggests that these deposits were formed by an additional tsunami caused by a second impact event in the earliest Danian, near or at the boundary between the Palaeocene P α and P 1a foraminiferal zones. Impact-derived material has not been found in the uppermost Cretaceous beds.     

Characterization of a chalcopyrite from Brazil by Mössbauer spectroscopy and other physicochemical techniques

We studied a chalcopyrite from a Cu ore deposit in Rio Grande do Sul, Brazil, by Mössbauer spectroscopy at room temperature and 110 K. Supporting methods to check for sample purity and to characterize further sample properties were slow-scanning X-ray powder diffraction and optical and microprobe analyses of polished sections of selected grains. Chemical analyses obtained using a scanning electron microscope equipped with an energy-dispersive X-ray spectrometer showed the sample to consist of homogeneous and essentially stoichiometric chalcopyrite (CuFeS₂). Mössbauer spectra taken at both the above temperatures consist of asymmetric magnetically ordered patterns with unequal intensities of the line pairs 1–6 and 2–5, pointing to the existence of non-equivalent or multiple Fe sites. Least-squares fittings evidenced that the resonance intensity ratio of subspectrum with lower quadrupole shift (indicative of a more symmetric environment) to that with higher shift is 69:31, at room temperature, and 68:32, at 110 K. Rietveld refinement of the XRD data indicates the existence of tetragonal [a = 0.52855(1) and c = 1.0412(1) nm] and cubic [a ₀ = 0.5273(2) nm] modifications in a proportion of 74:26, in good agreement with the Mössbauer data. The saturation magnetization of the sample was 32.7 J/(T kg), confirming the oxidation state of Fe as trivalent and pointing to little to no spin canting.     

Generative Adversarial Network Applied to Ore Type Modeling in Complex Geological Environments

Mathematical Geosciences - In complex geological environments, the spatial domain characterization of different ore types has been one of the most important challenges in the assessment of mineral...