A Place to Howl: A GIS Instructional Module on the Mexican Gray Wolf

Abstract

This paper covers the development of a GIS instructional module centered on the reintroduction of the Mexican Gray Wolf in the Southwest, United States. This module is used in an undergraduate geography course on the United States. The paper also reports on how forty‐one students applied the module in trying to find an appropriate location to reintroduce the wolf.     

Accessibility Futures

This study uses accessibility as a performance measure to evaluate a matrix of future land use and network scenarios for planning purposes. The concept of accessibility dates to the 1950s, but this type of application to transportation planning is new. Previous research has established the coevolution of transportation and land use, demonstrated the dependence of accessibility on both, and made the case for the use of accessibility measures as a planning tool. This study builds off of these findings by demonstrating the use of accessibility‐based performance measures in the Twin Cities Metropolitan Area. This choice of performance measure also allows for transit and highway networks to be compared side‐by‐side. For roadway modeling, zone‐to‐zone travel time matrix was computed using stochastic user equilibrium (SUE) assignment with travel time feedback to trip distribution. A database of schedules was used on the transit networks to assign transit routes. This travel time data was joined with the land use data from each scenario to obtain the employment, population, and labor accessibility from each traffic analysis zone (TAZ) within specified time ranges. Tables of person‐weighted accessibility were computed for 20 minutes with zone population as the weight for employment accessibility and zone employment as the weight for population and labor accessibility. Maps of accessibility by zone were produced to show the spatial distribution of accessibility across the region. The results show that a scenario where population and employment growth are concentrated in the center of the metropolitan area would produce the highest accessibility no matter which transportation network changes are made. However, another scenario which concentrates population growth in the center of the metropolitan area and shifts employment growth to the periphery consistently outperforms the scenario representing the projected 2030 land use without any growth management strategy.     

Change detection of linear features in temporally spaced remotely sensed images using edge-based grid analysis

Automatic change detection of land cover features using high-resolution satellite images, is a challenging problem in the field of intelligent remote sensing data interpretation, and is becoming more and more effective for its applications viz. urban planning and monitoring, disaster assessment etc. In the present study, a change in detection approach based on the image morphology that analyses change in the local image grids is proposed. In this approach, edges from both the images are extracted and grid wise comparison is made by probabilistic thresholding and power spectral density analysis for identifying change area. One of the advantages of the proposed methodology is that the temporal images used in the change analysis need not be radiometrically corrected as analysis is based on edge extractions. The grid-based analysis further reduces the error, which might have been introduced by image mis-registration. The proposed methodology is validated by finding the temporal changes in the linear land cover features in parts of Kolkata city, India using three different image data-sets from LISS IV, Cartosat-1 and Google earth having varied spatial resolutions of 5.8 m, 2.5 m and about 1 m, respectively. The overall accuracy in identifying changes is found to be 64.82, 73.86 and 80.93% for LISS IV, Cartosat-1 and Google earth data-set, respectively.     

Towards Real‐Time Geodemographics: Clustering Algorithm Performance for Large Multidimensional Spatial Databases

Geodemographic classifications provide discrete indicators of the social, economic and demographic characteristics of people living within small geographic areas. They have hitherto been regarded as products, which are the final “best” outcome that can be achieved using available data and algorithms. However, reduction in computational cost, increased network bandwidths and increasingly accessible spatial data infrastructures have together created the potential for the creation of classifications in near real time within distributed online environments. Yet paramount to the creation of truly real time geodemographic classifications is the ability for software to process and efficiency cluster large multidimensional spatial databases within a timescale that is consistent with online user interaction. To this end, this article evaluates the computational efficiency of a number of clustering algorithms with a view to creating geodemographic classifications “on the fly” at a range of different geographic scales.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

A Raman spectroscopic study of H/D isotopically substituted hydrous aluminosilicate glasses

We have obtained high quality Raman spectra for two H/D isotopically substituted hydrous aluminosilicate glasses with compositions along the NaAlSi₃O₈-SiO₂ join. Consistent with the results of previous studies, the isotope shift for the band near 900 cm^–1, whose intensity grows with increasing water content, is extremely small: v _h /v _d = 1.004 ± 0.004. The lack of a definite H/D isotope shift for this band does not, however, preclude its association with a vibration of a hydrous species in the glass, because of likely strong coupling between different vibrational modes of hydrated framework species. The 900 cm^–1 band could well be due to a T — OH (T = Si, Al) stretching or bending vibration in the hydrous glass, as required by the presence of a combination band near 4500 cm^–1 in near-infrared spectra.     

Short-term and interannual variability of redox-sensitive chemical parameters in hypoxic/anoxic bottom waters of the Chesapeake Bay

A combination of CTD casts, discrete bottle sampling and in situ voltammetric microelectrode profiling was used to examine changing redox conditions in the water column at a single station south of the Bay Bridge in the upper Chesapeake Bay in late July/early August, 2002–2005. Short-term (2–4 h) fluctuations in the oxic/suboxic/anoxic interface were documented using in situ voltammetric solid-state electrodes. Profiles of dissolved oxygen and sulfide revealed tidally-driven vertical fluctuations of several meters in the depth and thickness of the suboxic zone. Bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺ also varied over the tidal cycle by approximately an order of magnitude. These data indicate that redox species concentrations at this site varied more due to physical processes than biogeochemical processes. Based on analysis of ADCP data, tidal currents at this station were strongly polarized, with the principal axis of tidal currents aligned with the mainstem channel. Together with the chemical data, the ADCP analysis suggests tidal flushing of anoxic bottom waters with suboxic water from north of the site. The present study is thus unique because while most previous studies have focused on processes across relatively stable redox interfaces, our data clearly demonstrate the influence of rapidly changing physical mixing processes on water column redox chemistry.Also noted during the study were interannual differences in maximum bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺. In 2003, for example, heavy spring rains resulted in severe hypoxia/anoxia in June and early July. While reported storm-induced mixing in late July/early August 2003 partially alleviated the low-oxygen conditions, bottom water concentrations of sulfide, Mn²⁺ and Fe²⁺ were still much higher than in the previous year. The latter implies that the response time of the microbial community inhabiting the suboxic/anoxic bottom waters to changing redox conditions is slow compared to the time scale of episodic mixing events. Bottom water concentrations of the redox-sensitive chemical species should thus be useful as a tracer to infer prior hypoxic/anoxic conditions not apparent from ambient oxygen levels at the time of sampling.     

Bandpass calibration of a wideband spectrometer using coherent pulse injection

We present a relatively simple time domain method for determining the bandpass response of a system by injecting a nanosecond pulse and capturing the system voltage output. A pulse of sub-nanosecond duration contains all frequency components with nearly constant amplitude up to 1 GHz. Hence, this method can accurately determine the system bandpass response to a broadband signal. In a novel variation on this impulse response method, a train of pulses is coherently accumulated providing precision calibration with a simple system. The basic concept is demonstrated using a pulse generator-accumulator setup realised in a Bedlam board which is a high speed digital signal processing unit. The same system was used at the Parkes radio telescope between 2–13 October 2013 and we demonstrate its powerful diagnostic capability. We also present some initial test data from this experiment.