Genetic variation and population structure in the New Zealand snapper

Fifteen proteins encoded by 23 gene loci were electrophoretically surveyed in two samples of snapper Chrysophrys auratus (Forster) from Wellington Harbour and the Hauraki Gulf. Between 17% and 26% of the loci examined were found to be polymorphic and the proportion of heterozygous loci per individual was 7.9% to 8.4%. Using Rogers’ genetic distance coefficient an overall similarity of 0.98 was calculated between the two samples.

Three polymorphic loci Est‐4, Gpi‐1, and Idh were examined in an additional 10 samples from around New Zealand. Two genetically distinct stocks were apparent: one along the west coast, the other along the east coast of the North Island. There was an indication of stock mixing at Ninety Mile Beach and in the Bay of Plenty and East Cape. The distribution of alleles at the Est‐4 locus revealed a third stock in Hawke Bay that is genetically more similar to the west coast than the east coast stock. Hydrological conditions in Hawke Bay are more similar to those of the west coast than to those of the north east coast of the North Island. Thus it is possible that Est‐4 alleles are selectively maintained in response to an environmental factor.     

Vadose zone-attenuated artificial recharge for input to a ground water model

Accurate representation of artificial recharge is requisite to calibration of a ground water model of an unconfined aquifer for a semiarid or arid site with a vadose zone that imparts significant attenuation of liquid transmission and substantial anthropogenic liquid discharges. Under such circumstances, artificial recharge occurs in response to liquid disposal to the vadose zone in areas that are small relative to the ground water model domain. Natural recharge, in contrast, is spatially variable and occurs over the entire upper boundary of a typical unconfined ground water model. An improved technique for partitioning artificial recharge from simulated total recharge for inclusion in a ground water model is presented. The improved technique is applied using data from the semiarid Hanford Site. From 1944 until the late 1980s, when Hanford's mission was the production of nuclear materials, the quantities of liquid discharged from production facilities to the ground vastly exceeded natural recharge. Nearly all hydraulic head data available for use in calibrating a ground water model at this site were collected during this period or later, when the aquifer was under the diminishing influence of the massive water disposals. The vadose zone is typically 80 to 90 m thick at the Central Plateau where most production facilities were located at this semiarid site, and its attenuation of liquid transmission to the aquifer can be significant. The new technique is shown to improve the representation of artificial recharge and thereby contribute to improvement in the calibration of a site-wide ground water model.     

Hydrologic significance of carbon monoxide concentrations in ground water

Dissolved carbon monoxide (CO) is present in ground water produced from a variety of aquifer systems at concentrations ranging from 0.2 to 20 nanomoles per liter (0.0056 to 0.56 microg/L). In two shallow aquifers, one an unconsolidated coastal plain aquifer in Kings Bay, Georgia, and the other a fractured-bedrock aquifer in West Trenton, New Jersey, long-term monitoring showed that CO concentrations varied over time by as much as a factor of 10. Field and laboratory evidence suggests that the delivery of dissolved oxygen to the soil zone and underlying aquifers by periodic recharge events stimulates oxic metabolism and produces transiently high CO concentrations. In between recharge events, the aquifers become anoxic and more substrate limited, CO is consumed as a carbon source, and CO concentrations decrease. According to this model, CO concentrations provide a transient record of oxic metabolism affecting ground water systems after dissolved oxygen has been fully consumed. Because the delivery of oxygen affects the fate and transport of natural and anthropogenic contaminants in ground water, CO concentration changes may be useful for identifying predominantly anoxic ground water systems subject to periodic oxic or microaerophilic conditions.     

A simple pore water hydrogen diffusion syringe sampler

Molecular hydrogen (H(2)) is an important intermediate product and electron donor in microbial metabolism. Concentrations of dissolved H(2) are often diagnostic of the predominant terminal electron-accepting processes in ground water systems or aquatic sediments. H(2) concentrations are routinely measured in ground water monitoring wells but are rarely measured in saturated aquatic sediments due to a lack of simple and practical sampling methods. This report describes the design and development (including laboratory and field testing) of a simple, syringe-based H(2) sampler in (1) saturated, riparian sediments, (2) surface water bed sediments, and (3) packed intervals of a fractured bedrock borehole that are inaccessible by standard pumped methods.     

Temporal and geochemical evolution of the Cenozoic intraplate volcanism of Zealandia

In order to constrain better the distribution, age, geochemistry and origin of widespread Cenozoic intraplate volcanism on Zealandia, the New Zealand micro-continent, we report new ⁴⁰Ar/³⁹Ar and geochemical (major and trace element and Sr–Nd–Hf–Pb isotope) data from offshore (Chatham Rise, Campbell and Challenger Plateaus) and onland (North, South, Auckland, Campbell, Chatham and Antipodes Islands of New Zealand) volcanism on Zealandia. The samples include nephelinite, basanite through phonolite, alkali basalt through trachyte/rhyolite, and minor tholeiite and basaltic andesite, all of which have ocean island basalt (OIB)-type trace element signatures and which range in age from 64.8 to 0.17 Ma. Isotope ratios show a wide range in composition (⁸⁷Sr/⁸⁶Sr = 0.7027–0.7050, ¹⁴³Nd/¹⁴⁴Nd = 0.5128–0.5131, ¹⁷⁷Hf/¹⁷⁶Hf = 0.2829–0.2831, ²⁰⁶Pb/²⁰⁴Pb = 18.62–20.67, ²⁰⁷Pb/²⁰⁴Pb = 15.54–15.72 and ²⁰⁸Pb/²⁰⁴Pb = 38.27–40.34) with samples plotting between mid-ocean-ridge basalts (MORB) and Cretaceous New Zealand intraplate volcanic rocks.Major characteristics of Zealandia's Cenozoic volcanism include longevity, irregular distribution and lack of age progressions in the direction of plate motion, or indeed any systematic temporal or spatial geochemical variations. We believe that these characteristics can be best explained in the context of lithospheric detachment, which causes upwelling and melting of the upper asthenospheric mantle and portions of the removed lithosphere. We propose that a large-scale seismic low-velocity anomaly, that stretches from beneath West Antarctica to Zealandia at a depth of > 600 km may represent a geochemical reservoir that has been in existence since the Cretaceous, and has been supplying the upper mantle beneath Zealandia with HIMU-type plume material throughout the Cenozoic. In addition, the sources of the Cenozoic intraplate volcanism may be at least partially derived through melting of locally detached Zealandia lower lithosphere.     

Meteoric Be in soil profiles - A global meta-analysis

In order to assess current understanding of meteoric ¹⁰Be dynamics and distribution in terrestrial soils, we assembled a database of all published meteoric ¹⁰Be soil depth profiles, including 104 profiles from 27 studies in globally diverse locations, collectively containing 679 individual measurements. This allows for the systematic comparison of meteoric ¹⁰Be concentration to other soil characteristics and the comparison of profile depth distributions between geologic settings. Percent clay, ⁹Be, and dithionite-citrate extracted Al positively correlate to meteoric ¹⁰Be in more than half of the soils where they were measured, but the lack of significant correlation in other soils suggests that no one soil factor controls meteoric ¹⁰Be distribution with depth. Dithionite-citrate extracted Fe and cation exchange capacity are only weakly correlated to meteoric ¹⁰Be. Percent organic carbon and pH are not significantly related to meteoric ¹⁰Be concentration when all data are complied.The compilation shows that meteoric ¹⁰Be concentration is seldom uniform with depth in a soil profile. In young or rapidly eroding soils, maximum meteoric ¹⁰Be concentrations are typically found in the uppermost 20 cm. In older, more slowly eroding soils, the highest meteoric ¹⁰Be concentrations are found at depth, usually between 50 and 200 cm. We find that the highest measured meteoric ¹⁰Be concentration in a soil profile is an important metric, as both the value and the depth of the maximum meteoric ¹⁰Be concentration correlate with the total measured meteoric ¹⁰Be inventory of the soil profile.In order to refine the use of meteoric ¹⁰Be as an estimator of soil erosion rate, we compare near-surface meteoric ¹⁰Be concentrations to total meteoric ¹⁰Be soil inventories. These trends are used to calibrate models of meteoric ¹⁰Be loss by soil erosion. Erosion rates calculated using this method vary based on the assumed depth and timing of erosional events and on the reference data selected.     

Evaluation and implications of seismic events in Garhwal-Kumaun region of Himalaya

The Garhwal-Kumaun region continues to accumulate the built-up of strain energy like the other regions of the Himalaya. But this sector unlike the other sectors is yet to release this accumulated strain energy which can be in the form of great earthquake. The region has sufficient strain energy to generate earthquake of M>8. The analysis of seven hundred ten local events recorded by ten station broad band network between August’07 to February’10 shows that most of the seismic events recorded in this region continue to occur from shallow depths (< 25 km). The evaluation of source parameters from p-wave spectral analysis indicates that the events have low stress drop values. The region continues to release energy in the form of smaller magnitude earthquakes. The epicentral location map indicates that Munsiari Thrust, which is located south of the Main Central Thrust is more active.     

Towards a volcanic–structural balance: relative importance of volcanism, folding, and remobilisation of nickel sulphides at the Perseverance Ni–Cu–(PGE) deposit, Western Australia

Perseverance is a world-class, komatiite-hosted nickel sulphide deposit situated in the well-endowed Leinster nickel camp of the Agnew–Wiluna greenstone belt, Western Australia. The mine stratigraphy at Perseverance trends north-northwest (NNW), dips steeply to the west, and is overturned. Stratigraphic footwall units lie along the western margin of the Perseverance Ultramafic Complex (PUC). The PUC comprises a basal nickel sulphide-bearing orthocumulate- to mesocumulate-textured komatiite that is overlain by a thicker, nickel sulphide-poor, dunite lens. Hanging wall rocks include rhyodacite that is texturally and compositionally similar to footwall volcanic rocks. These rocks separate the PUC from a second sequence of nickeliferous, E-facing, spinifex-textured komatiite units (i.e. the East Perseverance komatiite). Past workers argue for a conformable stratigraphic contact between the PUC and the East Perseverance komatiite and conclude that the PUC is extrusive. This study, however, clearly demonstrates that these komatiite sequences are discordant, implying that the PUC may have intruded rhyodacite country rock as a sill with subsequent structural juxtaposition against the East Perseverance komatiite. Early N–S shortening associated with the regional D_I deformation event (corresponding to the local D_P1 to D_P3 events at Perseverance) resulted in the heterogeneous partitioning of strain along the margins of the competent dunite. A mylonite developed in the more ductile footwall rocks along the footwall margin of the PUC, while isoclinal F₃ folds, such as the Hanging wall limb and Felsic Nose folds, formed in low-mean stress domains along the fringes of the elongated dunite lens. Strata-bound massive and disseminated nickel sulphides were passively fold thickened in hinge areas of isoclinal folds, whereas basal massive sulphides lubricated fold limbs and promoted thrust movement along shallowly dipping lithological contacts. Massive sulphides were physically remobilised up to 20 m from their primary footwall position into deposit-scale fold hinges to form the 1A and Felsic Nose orebodies. First-order controls on the geometry of the Perseverance deposit include the thermomechanical erosion of footwall rocks and the channelling of the mineralised komatiitic magma. Second- or third-order controls are several postvolcanic deformation events, which resulted in the progressive folding and shearing of the footwall contact, as well as the passive fold thickening of massive and disseminated sulphide orebodies. Massive sulphides were physically remobilised into multiple generations of fold hinges and shear zones. Important implications for near-mine exploration in the Leinster camp include identifying nickeliferous komatiite units, defining their three-dimensional geometry, and targeting fold hinge areas. Fold plunge directions and stretching lineations are indicators of potential plunge directions of massive sulphide orebodies.     

Postglacial vegetation history of Mitkof Island, Alexander Archipelago, southeastern Alaska

An AMS radiocarbon-dated pollen record from a peat deposit on Mitkof Island, southeastern Alaska provides a vegetation history spanning ∼12,900 cal yr BP to the present. Late Wisconsin glaciers covered the entire island; deglaciation occurred > 15,400 cal yr BP. The earliest known vegetation to develop on the island (∼12,900 cal yr BP) was pine woodland (Pinus contorta) with alder (Alnus), sedges (Cyperaceae) and ferns (Polypodiaceae type). By ∼12,240 cal yr BP, Sitka spruce (Picea sitchensis) began to colonize the island while pine woodland declined. By ∼11,200 cal yr BP, mountain hemlock (Tsuga mertensiana) began to spread across the island. Sitka spruce-mountain hemlock forests dominated the lowland landscapes of the island until ∼10,180 cal yr BP, when western hemlock (Tsuga heterophylla) began to colonize, and soon became the dominant tree species. Rising percentages of pine, sedge, and sphagnum after ∼7100 cal yr BP may reflect an expansion of peat bog habitats as regional climate began to shift to cooler, wetter conditions. A decline in alders at that time suggests that coastal forests had spread into the island's uplands, replacing large areas of alder thickets. Cedars (Chamaecyparis nootkatensis, Thuja plicata) appeared on Mitkof Island during the late Holocene.