Three-dimensional supervirtual seismic refraction interferometry

Improved supervirtual interferometry (SVI) method that enhance the signal-to-noise ratio (SNR) of noisy seismic refraction data is presented. This 3D supervirtual algorithm is helpful in removal of side lobes caused by convolution in the conventional 3D SVI method. In this study, we extend the supervirtual seismic refraction interferometry method to 3D geometries commonly used in active seismic exploration. To achieve this objective, synthetic 3D seismic refraction data were created using single patch orthogonal geometry. Simple two-layers velocity model was used. A zero phase wavelet was convolved with the refraction travel time to create the seismic wiggle trace. The refraction arrival is computed using the equation for horizontal refractor case and is not adapted for dipping refractor. Noise of Gaussian distribution with zero mean and 0.25 standard deviation was added to simulate a case of moderate ambient noise. The supervirtual algorithm, consisting of crosscorrelation, alignment, summation, and first arrival calculation is performed. By aligning and summation of all the correlogram, the stationary position of source-receiver pairs as required in the 2D supervirtual method are eliminated in this case. Synthetic data presented in this study shows accurate first arrivals after the application of the 3D SVI and traces with much better SNR than the actual traces.     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Helical probe tests in residual soils of the Appalachian Piedmont

Helical probe tests (HPT) are a quick and economical means for manual field testing of soils to depths of 1.5 m with readings taken at 0.15-m intervals in only 10 min. The equipment is lightweight (only 2 kg) and thus amenable to deploy on initial site reconnaissance explorations, shallow pavement projects, earth retention walls, and/or compaction of fills. Although suitable for use in a variety of geomaterials: sands, silts, clays, and mixed soils, the specific application to residual fine sandy silts and silty fine sands of the Appalachian Piedmont and Blue Ridge geologic provinces is shown here. Existing relationships for converting the measured HPT torque reading to equivalent cone penetration testing (CPT) tip resistances are reviewed, as well as other trends.     

Towards a Digital Earth: using archetypes to enable knowledge interoperability within geo-observational sensor systems design

Earth System Science (ESS) observational data are often inadequately semantically enriched by geo-observational information systems to capture the true meaning of the associated data sets. Data models underpinning these information systems are often too rigid in their data representation to allow for the ever-changing and evolving nature of ESS domain concepts. This impoverished approach to observational data representation reduces the ability of multi-disciplinary practitioners to share information in a computable way. Object oriented techniques that are typically employed to model data in a complex domain (with evolving domain concepts) can unnecessarily exclude domain specialists from the design process, invariably leading to a mismatch between the needs of the domain specialists, and how the concepts are modelled. In many cases, an over simplification of the domain concept is captured by the computer scientist. This paper proposes that two-level modelling methodologies developed by health informaticians to tackle problems of domain specific use-case knowledge modelling can be re-used within ESS informatics. A translational approach to enable a two-level modelling process within geo-observational sensor systems design is described. We show how the Open Geospatial Consortium’s (OGC) Observations & Measurements (O&M) standard can act as a pragmatic solution for a stable reference-model (necessary for two-level modelling), and upon which more volatile domain specific concepts can be defined and managed using archetypes. A rudimentary use-case is presented, followed by a worked example showing the implementation methodology and considerations leading to an O&M based, two-level modelling design approach, to realise semantically rich and interoperable Earth System Science based geo-observational sensor systems.     

Characterization of fluid inclusions from mineralized pegmatites of the Damara Belt,Namibia: insight into late-stage fluid evolution and implications for mineralization

Mineralogy and Petrology - Mineralized NYF and LCT pegmatites occur throughout the northeast-trending Neoproterozoic Damara Belt, Namibia. Mineralization in the pegmatites varies geographically,...     

The Digital Belt and Road program in support of regional sustainability

The Belt and Road initiative has a significant focus on infrastructure, trade, and economic development across a vast region, and it also provides significant opportunities for sustainable development. The combined pressure of climate variability, intensified use of resources, and the fragility of ecosystems make it very challenging, however, to achieve future sustainability. To develop the path in a sustainable way, it is important to have a comprehensive understanding of these issues across nations and evaluate them in a scientific and well-informed approach. In this context, the Digital Belt and Road (DBAR) program was initiated as an international venture to share expertise, knowledge, technologies, and data to demonstrate the role of Earth observation science and technology and big Earth data applications to support large-scale development. In this paper, we identify pressing challenges, present the research priorities and foci of the DBAR program, and propose solutions where big Earth data can make significant contributions. This paper calls for further joint actions and collaboration to build a digital silk road in support of sustainable development at national, regional and global levels.     

Review: Theory-guided machine learning applied to hydrogeology—state of the art,opportunities and future challenges

Hydrogeology Journal - Thanks to recent technological advances, hydrogeologists now have access to large amounts of data acquired in real time. Processing these data using traditional modelling...     

Darwin’s deep well at Down House,England (UK)

Hydrogeology Journal - When Charles Darwin moved to Down House, England (UK), in 1842, he inherited a deep well, penetrating 325&nbsp;ft (~100&nbsp;m) into the Chalk. The groundwater from...     

Transforming local natural resource conflicts to cooperation in a changing climate: Bangladesh and Nepal lessons

ABSTRACT

Since the 1990s, climate change impact discourse has highlighted potential for large scale violent conflicts. However, the role of climate stresses on local conflicts over natural resources, the role of policies and adaptation in these conflicts, and opportunities to enhance cooperation have been neglected. These gaps are addressed in this paper using evidence from participatory action research on 79 cases of local collective action over natural resources that experience conflicts in Bangladesh and Nepal. Climate trends and stresses contributed to just under half of these conflict cases. Nine factors that enable greater cooperation and transformation of conflict are identified. Participatory dialogue and negotiation processes, while not sufficient, changed understanding, attitudes and positions of actors. Many of the communities innovated physical measures to overcome natural resource constraints, underlying conflict, and/or institutional reforms. These changes were informed by improving understanding of resource limitations and indigenous knowledge. Learning networks among community organizations encouraged collective action by sharing successes and creating peer pressure. Incentives for cooperation were important. For example, when community organizations formally permitted excluded traditional resource users to access resources, those actors complied with rules and paid towards management costs. However, elites were able to use policy gaps to capture resources with changed characteristics due to climate change. In most of the cases where conflict persisted, power, policy and institutional barriers prevented community-based organizations from taking up potential adaptations and innovations. Policy frameworks recognizing collective action and supporting flexible innovation in governance and adaptation would enable wider transformation of natural resource conflicts into cooperation.

Key policy insights

• Climate stresses, policy gaps and interventions can all worsen local natural resource conflicts.

• Sectoral knowledge and technical approaches to adaptation are open to elite capture and can foster conflicts.

• Many local natural resource conflicts can be resolved but this requires an enabling environment for participatory dialogue, external facilitation, flexible responses to context, and recognition of disadvantaged stakeholder interests.

• Transforming conflict to greater cooperation mostly involves social and institutional changes, so adaptation policies should focus less on physical works and more on enabling factors such as negotiation, local institutions, knowledge, and incentives.

     

阿尔金断裂带对青藏高原北部生长、隆升的制约

大量的同位素年代学证据表明(古)阿尔金断裂带可能形成于三叠纪,后又经历了侏罗纪、白垩纪的强烈左旋走滑活动,自印度板块与欧亚大陆碰撞后阿尔金断裂再次活动。主要的走滑活动发生在:(1)245~220Ma;(2)180~140Ma;(3)120~100Ma;(4)90~80Ma;(5)60~45Ma;(6)渐新世至中新世;(7)上新世至更新世以及(8)全新世。沿阿尔金断裂带,伴随左旋走滑活动形成一系列的逆冲断裂和正断裂,反映走滑过程中伴随隆升作用的存在,并且形成自北向南包括祁连山、大雪山、党河南山、柴北缘山、祁漫塔格山和昆仑山,表明阿尔金断裂带制约着青藏高原北部的生长和隆升。阿尔金断裂带东、西两端的白垩纪和新生代火山活动是断裂走滑活动的响应。