Morphology,structure and kinematics of a rainfall controlled slow‐moving Andean landslide,Peru

The large slow‐moving landslide of Maca is located in the upper Colca valley (southern Peru), a region characterized by a well pronounced rainy period, and intense and recurrent sustained seismicity. The landslide, developed in deep lacustrine deposits, has recently accelerated, threatening the Maca village. This work aims at understanding the rupture mechanism and the causes of the recent landslide reactivation/acceleration. We present a multidisciplinary characterization of the Maca landslide that includes: (i) geological and morphological mapping in the field; (ii) remote sensing analysis using an historical aerial photograph of 1955 and the Pléiades satellite images (2013); (iii) global positioning system (GPS) including time‐series of surveys over 13 years, and continuous measurements over 14 months; (iv) a geophysical campaign with deep electrical resistivity tomography profiles acquired across the landslide mass. Our study shows that this 60 Mm³ landslide, which can be classified as a clay/silt compound landslide, moved by 15 m between 2001 and 2014 with a large inter‐annual velocity variation (up to a factor of 500) depending on the rainfall intensity. We suggest that these dramatic changes in velocity are the result of the combination of a threshold mechanism and the short intense rainy season in Peru. This study reveals three main driving factors acting at different timescales: (i) over several decades, the river course has significantly changed, causing the Maca landslide reactivation in the 1980s due to the erosion of its toe; (ii) at the year scale, a minimum amount of rainfall is required to trigger the motion and this amount controls the landslide velocity; (iii) transient changes in slide velocity may occur anytime due to earthquakes. This study particularly highlights the non‐linear behaviour of the motion with rainfall. Copyright © 2016 John Wiley & Sons, Ltd.     

Oxygen and organic carbon fluxes in sediments of the Bay of Biscay

The relationship between particulate organic carbon (POC) concentrations measured in modern sediment and fluxes of exported POC to the sediment surface needs to be understood in order to use POC content as a proxy of paleo-environmental conditions. The objective of our study was to compare POC concentrations, POC mineralization rates calculated from O₂ consumption and POC burial rates. Benthic O₂ distributions were determined in 58 fine-grained sediment cores collected at different periods at 14 stations in the southeastern part of the Bay of Biscay with depths ranging from 140 to 2800 m. Depth-dependent volume-specific oxygen consumption rates were used to assess rates of aerobic oxidation of organic matter (OM), assuming that O₂ consumption solely was related to heterotrophic activity at the sediment–water interface. Heterogeneity of benthic O₂ fluxes denoted changes in time and space of fresh organic material sedimentation. The most labile fraction of exported POC engendered a steep decrease in concentration in the upper 5 mm of vertical O₂ profiles. The rupture in the gradient of O₂ microprofile may be related to the bioturbation-induced mixing depth of fast-decaying carbon. Average diffusive O₂ fluxes showed that this fast-decaying OM flux was much higher than buried POC, although diffusive O₂ fluxes underestimated the total sediment oxygen demand, and thus the fast-decaying OM flux to the sediment surface. Sedimentary POC burial was calculated from sediment mass accumulation rate and the organic carbon content measured at the top of the sediment. The proportion of buried POC relative to total exported POC ranged at the most between 50% and 10%, depending on station location. Therefore, for a narrow geographic area like the Bay of Biscay, burial efficiency of POC was variable. A fraction of buried POC consisted of slow-decaying OM that was mineralized within the upper decimetres of sediment through oxic and anoxic processes. This fraction was deduced from the decrease with depth in POC concentration. At sites located below 500 m water depth, where the fast-decaying carbon did not reach the anoxic sediment, the slow-decaying pool may control the O₂ penetration depth. Only refractory organic material was fossilized in sedimentary records at locations where labile OM did not reach the anoxic portion of the sediment.     

An empirical approach to estimating population parameters from censored fracture-length distributions

Most fracture data sets are length-censored because of incomplete exposure at the surface, so estimating values of parameters of the sampled populations is difficult. Unless the form of the distribution function of the population is known, or one which is analytically tractable is assumed, length-censoring presents formidable problems in determining population parameters. Tests conducted on experimental fracture patterns developed in clay samples subjected to simple shear loading are the basis of a distribution-free way to estimate population parameters. Comparison of random samples of censored and uncensored fracture lengths shows that a useful, homogeneous data set consists of those cracks which lie entirely within the sampling area (two-ended cracks). The properties of this data set can be used to estimate the mean and variance of uncensored data. Estimates of the maximum fracture length of uncensored data, using the variance and maximum length of these two-ended cracks, show good agreement with measured values. Knowledge of the mean, variance, and maximum value of fracture-length populations are of interest in engineering and hydraulic studies, as well as in remote sensing studies of the Earth and other planets. Application of these results to data on rock masses are subject to the caveat that different crack-growth mechanisms in clay and rock may affect the accuracy of the calculations.     

Quasi-hydrostatic compression of ruby to 500 Kbar

Measurements of the cell parameters of ruby to 500 Kbar under quasi-hydrostatic conditions in a diamond-anvil cell show a practically isotropic compression, the ratio c/a of the hexagonal cell parameters remaining constant. These results are consistent with previous single-crystal measurements below 100 Kbar as well as with ultrasonic elastic-constant measurements. There is no evidence for significant differences between the bulk moduli of ruby and corundum, and a review of compression and ultrasonic data yield Ko = 2.53±0.01 Mbar and Ko = 5.0 ± 0.4. Good agreement with the experimental values is found for compressions calculated from empirically or theoretically determined elastic properties.     

Viscosity and configurational entropy of silicate melts

With the configurational entropy theory of relaxation processes of Adam and Gibbs (1965), one predicts that the viscosity depends on temperature according to log $\text{η = A}{}_{\mathrm{e}}\text{+}\text{B}{}_{\mathrm{e}}\text{TS}{}_{\mathrm{<mtext>conf</mtext>}}$, where S_conf is the configurational entropy of the liquid. Thermochemical calculations of S_conf performed for some mineral compositions show the importance of non-configurational contributions to the entropy differences between amorphous and crystalline phases. Except for the case of SiO₂, the available thermodynamic data indicate that the above equation for viscosity accounts quantitatively for the experimentally determined temperature dependence of the viscosity of silicate melts. The Adam and Gibbs theory also provides a simple rationale for the non linear variation of the logarithmic viscosity with composition in mixed alkali silicate liquids at low temperatures, the minimum of viscosity resulting from the contribution of the entropy of mixing to S_conf.     

Wet Snow Avalanche Deposits in the French Alps: Structure and Sedimentology

We analyse the morphology and sedimentology of 25 dirty snow avalanche deposits in the French Alps. The deposits typically have either a snow-ball structure or a massive structure with sliding planes. The snow balls show a longitudinal and a vertical sorting that reflects a sieve effect, similar to that observed in other rapid inertial granular flows. The massive type results from snow compaction when the avalanche is channelled by a gully or when it reaches the distal part of the scree. Velocity decrease and compaction limit the deformation to a zone at the base of the snow mass and cause the formation of distinctive sliding planes. These appear as smooth recrystallised surfaces due to local melt from frictional heating. The flow can be assimilated to a frictional granular flow. No systematic variation of size and shape of the rock debris has been observed along the profiles in both types of deposit. The distribution of rock debris and its fabric suggest that the clasts are transported passively and do not undergo any sorting during displacement. Snow melt after avalanching causes a redistribution of rock debris particularly when the snow thickness is important. This redistribution does not generate new sedimentological characteristics such as enhanced sorting or fabric.     

Fluid composition and evolution in coesite-bearing rocks (Dora-Maira massif,Western Alps): implications for element recycling during subduction

Fluid inclusions and F, Cl concentration of hydrous minerals were analysed in the coesite-pyrope quartzite, the interlayered jadeite quartzite and their country-rock gneiss from the Dora-Maira massif using a combination of microthermometry, Raman spectrometry, synchrotron X-ray microfiuorescence and electron microprobe analysis. Three populations of fluid inclusions were recognized texturally and can be related to distinct metamorphic stages. A low-salinity aqueous fluid occurs in the retrogressed country gneiss and as late secondary inclusions in jadeite quartzite and chloritized pyrope. An earlier secondary population is found in matrix quartz of the jadeite- and pyro-pe-quartzites. This population can be related to the early decompression and so to incipient breakdown of garnet into phlogopite-bearing assemblages. The inclusion fluid is highly saline (up to 84 wt% equivalent NaCl) and contains Na, Ca, Fe, Cu and Zn as major cations. In pyrope quartzite, additional K was found in these brines, which locally coexist with CO₂-rich inclusions. The oldest fluid inclusions are preserved in kyanite grains included in fresh pyrope and in pyrope itself. In pyrope, all inclusions have decrepitated and contain magnesite, an Mg-phosphate, sheet-silicate(s), a chloride and an opaque phase, with no fluid preser ved. In contrast, the kyanite inclusions in pyrope preserve primary H₂O-CO₂ low-salinity fluid inclusions, probably owing to the low compressibility of the kyanite inclusions and host garnet. In spite of in-situ re-equilibration, these inclusions can be interpreted as relics of the dehydration fluid that attended pyrope growth. These correlations between textural and chemical fluid inclusion data and metamorphic stages are consistent with the fluid composition calculated from the halogen content of different generations of phlogopite and biotite. The preservation of different fluid compositions, both in time and space, is evidence for local control and possibly origin of the fluids, in agreement with isotopic data. These results, in particular the absence of CO₂ in the jadeite quartzite, are best interpreted in terms of a fluid-melt system evolution. With increasing metamorphism, partitioning of H₂O, Na, Ca, Fe and heavy metals into melt (jadeite quartzite) and Mg, Na/K, F, CO₂ and P(?) into a residual aqueous fluid can account for depletion in Na, Ca and Fe of the pyrope quartzite. During the retrograde path, a _{H 2 O} rose as melt crystallized, generating the two populations of hypersaline and water-rich fluids that were highly reactive to pyrope. The process of fluid-melt interaction envisioned here coupled with models of melt extraction in subduction zones provides an attractive opportunity for the instantaneous ( < 1 Ma) and selective transport of elements between a downgoing slab and the overlying mantle wedge.