Application of wavelet transform analysis to landslide generated waves

The aim of this paper is to illustrate the results of a preliminary study on aerial landslide-generated waves, which has been mainly intended to establish a method for analyzing water surface records. Some simple physical experiments, reproducing the Scott Russell's wave generator, were carried out in a small two-dimensional wave flume; the Wavelet Transform (WT) is applied to analyze wave measurements and it is shown that useful information can be obtained by means of this technique. The celerity of impulsively generated waves, reflection by an overflow structure and seiching phenomena of the flume are studied. A discussion of the results along with some remarks about ongoing research is also given.     

A comparison of wetness indices for the prediction of observed connected saturated areas under contrasting conditions

For lack of other widely available spatial information, topography is often used to predict water fluxes and water quality in mesoscale watersheds. Such data have however proven to be misleading in many environments where large and flat valley bottoms and/or highly conducive soil covers determine water storage and water transport mechanisms. Also, the focus is generally on the prediction of saturation areas regardless of whether they are connected to the catchment hydrographic network or rather present in isolated topographic depressions. Here soil information was coupled with terrain data towards the targeted prediction of connected saturated areas. The focus was on the 30 km² Girnock catchment (Cairngorm Mountains, northeast Scotland) and its 3 km² sub‐catchment, Bruntland Burn in which seven field surveys were done to capture actual maps of connected saturated areas in both dry and humid conditions. The 1 km² resolution UK Hydrology of Soil Types (HOST) classification was used to extract relevant, spatially variable, soil parameters. Results show that connected saturated areas were fairly well predicted by wetness indices but only in wet conditions when they covered more than 30% of the whole catchment area. Geomorphic indices including information on terrain shape, steepness, aspect, soil texture and soil depth showed potential but generally performed poorly. Indices based on soil and topographic data did not have more predictive power than those based on topographic information only: this was attributed to the coarse resolution of the HOST classification. Nevertheless, analyses provided interesting insights into the scale‐dependent water storage and transport mechanisms in both study catchments. Copyright © 2013 John Wiley & Sons, Ltd.     

2012 Emilia earthquake,Italy: reinforced concrete buildings response

Data of the Italian National Institute of Statistics are collected aimed at characterizing Reinforced Concrete (RC) building stock of the area struck by the 2012 Emilia earthquake (number of storeys, age of construction, structural typology). Damage observations, collected right after the event in reconnaissance reports, are shown and analyzed emphasizing typical weaknesses of RC buildings in the area. The evolution of seismic classification for Emilia region and RC buildings’ main characteristics represent the input data for the assessment of non-structural damage of infilled RC buildings, through a simplified approach (FAST method), based on EMS-98 damage scale. Peak Ground Acceleration (PGA) capacities for the first three damage states of EMS-98 are compared with registered PGA in the epicentral area. Observed damage and damage states evaluated for the PGA of the event, in the epicentral area, are finally compared. The comparison led to a fair agreement between observed and numerical data.     

Recent geomorphological changes of the middle and lower Calore River (Campania, Southern Italy)

The geomorphological changes experienced by the middle and lower Calore River (Southern Italy) between 1957 and 1998 were investigated. Data derived from field surveys and interpretation of topographic maps and aerial photos were introduced into a geographic information system (GIS) and processed. The results showed that the Calore River underwent a mean narrowing of 66 %, with a peak of 86 %. The channel length increased by approximately 75 m and the sinuosity from 1.311 to 1.314. The extension of fluvial bars reduced by more than 83 %, while their number increased from 151 to 381. Field evidence of riverbed lowering, such as river terraces formed in the considered time span and exhumation of foundations of bridges and flood-walls, were also constantly detected. Due to these channel adjustments, the Calore River morphology changed from transitional to single-thread. These results were coherent with those reported in the pre-existing literature about channel adjustments experienced by many rivers during the twentieth century. They all were explainable with a reduction of the bedload transport; this latter, in turn, is completely in accordance with the environmental changes that affected the Calore River system in the considered period (i.e., damming and/or channelization of the main tributaries, reduction of liquid discharge due to water withdrawals and sediment mining from the riverbed).     

New model to determine forces at on-bottom slender pipelines

The present paper proposes a numerical model to determine horizontal and vertical components of the hydrodynamic forces on a slender submarine pipeline lying at the sea bed and exposed to non-linear waves plus a current. The new model is an extension of the Wake II type model, originally proposed for sinusoidal waves (Soedigdo et al., 1999) and for combined sinusoidal waves and currents (Sabag et al., 2000), to the case of periodic or random waves, even with a superimposed current. The Wake II type model takes into account the wake effects on the kinematic field and the time variation of drag and lift hydrodynamic coefficients. The proposed extension is based on an evolutional analysis carried out for each half period of the free stream horizontal velocity at the pipeline. An analytical expression of the wake velocity is developed starting from the Navier–Stokes and the boundary layer equations. The time variation of the drag and lift hydrodynamic coefficients is obtained using a Gaussian integration of the start-up function. A reduced scale laboratory investigation in a large wave flume has been conducted in order to calibrate the empirical parameters involved in the proposed model. Different wave and current conditions have been considered and measurements of free stream horizontal velocities and dynamic pressures on a bottom-mounted pipeline have been conducted. The comparison between experimental and numerical hydrodynamic forces shows the accuracy of the new model in evaluating the time variation of peaks and phase shifts of the horizontal and vertical wave and current induced forces.     

中等传输距离下的无线功率传输链路第1部分:实现工作状态最优化

中程无线功率传输（WPT）可以采用几种不同的方式实现,如通过电感或电容耦合、谐振或非谐振网络实现.本文主要研究了通过感应耦合谐振器实现的WPT链路,而且只着重研究了利用2个谐振器的链路（直接链路）并工作在主谐振频率下的情况.研究结果表明,当工作在主谐振频率下,可以根据网络参数来对传输效率或负载功率进行优化.     

Experimental calibration of vanadium partitioning and stable isotope fractionation between hydrous granitic melt and magnetite at 800 °C and 0.5 GPa

Vanadium has multiple oxidation states in silicate melts and minerals, a property that also promotes fractionation of its isotopes. As a result, vanadium isotopes vary during magmatic differentiation, and can be powerful indicators of redox processes at high temperatures if their partitioning behaviour can be determined. To quantify the partitioning and isotope fractionation factor of V between magnetite and melt, piston cylinder experiments were performed in which magnetite and a hydrous, haplogranitic melt were equilibrated at 800 °C and 0.5 GPa over a range of oxygen fugacities (\({f_{{{\text{O}}_{\text{2}}}}}\)), bracketing those of terrestrial magmas. Magnetite is isotopically light with respect to the coexisting melt, a tendency ascribed to the VI-fold V³⁺ and V⁴⁺ in magnetite, and a mixture of IV- and VI-fold V⁵⁺ and V⁴⁺ in the melt. The magnitude of the fractionation factor systematically increases with increasing log\({f_{{{\text{O}}_{\text{2}}}}}\) relative to the Fayalite–Magnetite–Quartz buffer (FMQ), from ?⁵¹V_mag-gl = ? 0.63?±?0.09‰ at FMQ ? 1 to ? 0.92?±?0.11‰ (SD) at ≈?FMQ?+?5, reflecting constant V³⁺/V⁴⁺ in magnetite but increasing V⁵⁺/V⁴⁺ in the melt with increasing log\({f_{{{\text{O}}_{\text{2}}}}}\). These first mineral-melt measurements of V isotope fractionation factors underline the importance of both oxidation state and co-ordination environment in controlling isotopic fractionation. The fractionation factors determined experimentally are in excellent agreement with those needed to explain natural isotope variations in magmatic suites. Furthermore, these experiments provide a useful framework in which to interpret vanadium isotope variations in natural rocks and magnetites, and may be used as a potential fingerprint the redox state of the magma from which they crystallise.     

The Cloud Ice Mountain Experiment (CIME) 1998: experiment overview and modelling of the microphysical processes during the seeding by isentropic gas expansion

The second field campaign of the Cloud Ice Mountain Experiment (CIME) project took place in February 1998 on the mountain Puy de Dôme in the centre of France. The content of residual aerosol particles, of H₂O₂ and NH₃ in cloud droplets was evaluated by evaporating the drops larger than 5 μm in a Counterflow Virtual Impactor (CVI) and by measuring the residual particle concentration and the released gas content. The same trace species were studied behind a round jet impactor for the complementary interstitial aerosol particles smaller than 5 μm diameter. In a second step of experiments, the ambient supercooled cloud was converted to a mixed phase cloud by seeding the cloud with ice particles by the gas release from pressurised gas bottles. A comparison between the physical and chemical characteristics of liquid drops and ice particles allows a study of the fate of the trace constituents during the presence of ice crystals in the cloud.In the present paper, an overview is given of the CIME 98 experiment and the instrumentation deployed. The meteorological situation during the experiment was analysed with the help of a cloud scale model. The microphysics processes and the behaviour of the scavenged aerosol particles before and during seeding are analysed with the detailed microphysical model ExMix. The simulation results agreed well with the observations and confirmed the assumption that the Bergeron–Findeisen process was dominating during seeding and was influencing the partitioning of aerosol particles between drops and ice crystals. The results of the CIME 98 experiment give an insight on microphysical changes, redistribution of aerosol particles and cloud chemistry during the Bergeron–Findeisen process when acting also in natural clouds.     

Garnet and spinel in fertile and depleted mantle: insights from thermodynamic modelling

We performed thermodynamic calculations based on model and natural peridotitic compositions at pressure and temperature conditions relevant to the Earth’s upper mantle, using well-established free energy minimization techniques. The model is consistent with the available experimental data in Cr-bearing peridotitic systems and can therefore be used to predict phase relations and mineral compositions in a wide range of realistic mantle compositions. The generated phase diagrams for six different bulk compositions, representative of fertile, depleted and ultra-depleted peridotitic mantle, shown that the garnet + spinel stability field is always broad at low temperatures and progressively narrows with increasing temperatures. In lithospheric sections with hot geotherms (ca. 60 mW/m²), garnet coexists with spinel across an interval of 10–15 km, at ca. 50–70 km depths. In colder, cratonic, lithospheric sections (e.g. along a 40 mW/m² geotherm), the width of the garnet–spinel transition strongly depends on bulk composition: In fertile mantle, spinel can coexist with garnet to about 120 km depth, while in an ultra-depleted harzburgitic mantle, it can be stable to over 180 km depth. The formation of chromian spinel inclusions in diamonds is restricted to pressures between 4.0 and 6.0 GPa. The modes of spinel decrease rapidly to less than 1 vol % when it coexists with garnet; hence, spinel grains can be easily overlooked during the petrographical characterization of small mantle xenoliths. The very Cr-rich nature of many spinels from xenoliths and diamonds from cratonic settings may be simply a consequence of their low modes in high-pressure assemblages; thus, their composition does not necessarily imply an extremely refractory composition of the source rock. The model also shows that large Ca and Cr variations in lherzolitic garnets in equilibrium with spinel can be explained by variations of pressure and temperature along a continental geotherm and do not necessarily imply variations of bulk composition. The slope of the Cr# [i.e. Cr/(Cr + Al)mol] isopleths in garnet in equilibrium with spinel changes significantly at high temperatures, posing serious limitations to the applicability of empirical geobarometric methods calibrated on cratonic mantle xenoliths in hotter, off-craton, lithospheric mantle sections.