Assembling the stratigraphic record: depositional patterns and time-scales in an experimental alluvial basin

Our understanding of sedimentation in alluvial basins is best for very short and very long time‐scales (those of bedforms to bars and basinwide deposition, respectively). Between these end members, the intermediate time‐scales of stratigraphic assembly are especially hard to constrain with field data. We address these ‘mesoscale’ fluvial dynamics with data from an experimental alluvial system in a basin with a subsiding floor. Observations of experimental deposition over a range of time‐scales illustrate two important properties of alluvial systems. First, ephemeral flows are disproportionately important in basin filling. Lack of correlation between flow occupation and sedimentation indicates that channelized flows serve mainly as conduits for sediment, while most deposition occurs via short‐lived unchannelized flow events. Second, there is a characteristic time required for individual depositional events to average to basin‐scale stratal patterns. This time can be scaled in terms of the time required for a single channel‐depth of aggradation, and in this form is constant through a four‐fold variation of experimental subsidence rate.     

Morphological methods and dynamic modelling in landslide hazard assessment of the Campania Apennine carbonate slope

Landslide risk of the Campanian carbonate slopes covered by pyroclastic deposits is mainly connected with the occurrence of high-velocity debris avalanches and debris flows. Analyses show that flows initiate as small translational slides in the pyroclastics. The failure process is controlled by the interaction of both natural and human-induced factors. Geomorphological settings play a decisive role in locating the source failures. Therefore, the crucial aspects in landslide hazard and risk assessment are: (a) recognise the geomorphological control factors, (b) determine parameters defining landslide intensity (velocity, volume, depth of deposit) and (c) predict landslide runout distance. An approach combining geomorphology and numerical analysis has been adopted in the work reported here. Potential future landslide intensity scenarios are simulated predicting the runout behaviour of potential instabilities by using a dynamic model previously calibrated by back-analysing observed events of similar scale and type. The selected area is a sector of the Avella Mountains having the same geomorphological environment as the 1998 Sarno landslides (Campania, Southern Italy).     

Bias and precision of percentiles of bulk grain size distributions

Percentiles such as D₅₀ and D₈₄, calculated from weights retained on different sieves, are widely used to characterize grain size distributions (GSDs) of bulk samples of sedimentary deposits or sediment fluxes. The sampling variability of such percentiles is not well known, and few sampling guidelines exist for reliable characterization of GSDs. We report results from computer sampling experiments on the variability of sample percentiles in different-sized samples from populations with a log-normal GSD by weight and different sorting coefficients. Sample sizes are scaled by the volume of a median-sized grain so that results can be applied to any log-normal GSD. Sampling is random for the GSD by number that is equivalent to a specified GSD by weight. Results show important differences from standard sampling theory applicable to pebble-count GSDs. In small bulk samples all percentiles, including the median, are underestimated (more so for smaller samples, coarser percentiles and poorer sorting), and precision does not improve with the square root of sample size until fairly large sample sizes are exceeded. Non-dimensional equations fitted by eye to the results give good approximations to expected bias and precision in any percentile from 50 to 95 for any given sample size and population sorting coefficient. They are inverted to estimate the sample size required to avoid significant bias, or achieve specified precision, in any percentile of interest given estimates of the population D₅₀ and sorting coefficient. Target sample sizes are sometimes considerably smaller, but in other circumstances larger, than suggested by previous guidelines relating to estimation of the entire grain size distribution. Bias is likely in small samples of river bedload and good precision requires very large samples of poorly sorted gravel deposits. © 1997 John Wiley & Sons, Ltd.     

The use of the slope–area function to analyse process domains in complex badland landscapes

This paper explores the effectiveness of the widely-used functional relationship between drainage area (A in m²) and slope (S in m/m) to identify local process domains and aid interpretation of process interactions in a complex badland landscape. In order to perform this investigation, a series of sub-basins tributary to the Formone River in the Orcia catchment (central Italy) were selected as a suitable study area within which to explore our questions, given these basins' general representativeness of local terrain, the availability of a high resolution digital terrain model and previous extensive geomorphological research. Eroding basins containing both calanchi and landslides are common in the sub-humid badland landscape of central Italy, where field observation identifies a complex pattern of erosive processes associated with a history of uplift, despite which parts of the local landscape appear disconnected. Results reveal that the shape of all S–A curves (plotted using S data binned on log A) is comparable with that described in the literature, although sub-basins containing calanchi generally plot with higher S values than non-calanchi ones, except in the ‘fluvial’ section of the plots. Second, when viewed on total data (non-binned) S–A plots, landslide source area domains and calanchi domains are entirely coincident in all basins, supporting a cause–effect relationship. Additional plotting of the frequency characteristics of the raw data in a new way supports the interpretation that calanchi frequently initiate in landslide scars. In general though, although the S–A plots can contribute to the disentanglement of geomorphological behaviour in some complex erosional landscapes, it became apparent that in this landscape, process domains do not separate out with clarity along the A axis as suggested by theory. Despite this, an alternative, broader-scale morphoevolutive model can be proposed for the development of within-landslide calanchi, driven by changes to basin connectivity to the base channel. © 2018 John Wiley & Sons, Ltd.     

Origin of mud in turbidites and hybrid event beds: Insight from ponded mudstone caps of the Castagnola turbidite system (north-west Italy)

The partitioning of different grain-size classes in gravity flow deposits is one of the key characteristics used to infer depositional processes. Turbidites have relatively clean sandstones with most of their clay deposited as part of a mudstone cap or as a distal mudstone layer, whereas sand-bearing debrites commonly comprise mixtures of sand grains and interstitial clay; hybrid event beds develop alternations of clean and dirty (clay-rich) sandstones in varying proportions. Analysis of co-genetic mudstone caps in terms of thickness and composition is a novel approach that can provide new insight into gravity flow depositional processes. Bed thickness data from the ponded Castagnola system show that turbidites contain more clay overall than do hybrid event beds. The Castagnola system is characterized by deposits of two very different petrographic types. Thanks to this duality, analyses of sandstone and mudstone composition allow inference of which proportion of the clay in each of the deposit types was acquired en route. In combination with standard sedimentological observations the new data allow insight into the likely characteristics of their parent flows. Clean turbidites were deposited by lower concentration, long duration, erosive, muddy turbidity currents which were more efficient at fractionating clay particles away from their basal layer. Hybrid event beds were deposited by shorter duration, higher-concentration, less-erosive sandier flows which were less efficient at clay fractionation. The results are consistent with data from other turbidite systems (for example, Marnoso-arenacea). The approach represents a new method to infer the controls on the degree of clay partitioning in gravity flow deposits.     

Recolonization patterns of benthic assemblages after relict sand dredging in the central Tyrrhenian sea

Recolonization patterns of benthic assemblages after relict sand dredging were investigated in an area offshore of Capo d’Anzio (central Tyrrhenian Sea). Surveys were performed before, during, and after dredging in 2007. Sampling stations were located within and outside the dredging site in water depths between 40 and 56 m. Defaunation due to sand extraction was the main impact observed in the inner stations and in stations located in proximity of the dredging site. At the inner stations, 9 months after dredging, a significant increase in species richness and diversity was observed: the sediment removal led to an increase of the sandy sediment fraction, favouring the settlement of sabulicolous species. A decrease in number of individuals and species was also observed in most of the outer stations, probably due to fine sediment redeposition. Recolonization of macrobenthic assemblages was essentially achieved at inner stations both in terms of abundance and species richness, while at outer stations it was still in progress. Results of this study, providing a picture of recovery times and processes in the Tyrrhenian Sea, could be used to develop predictions of the effects of future offshore sand dredging projects in comparable areas. Monitoring programs and research have a key role to provide a more detailed overview of biological recovery processes and times in different regions and with different dredging intensity.     

Prediction of the thermodynamic properties of metal–arsenate and metal–arsenite aqueous complexes to high temperatures and pressures and some geological consequences

The standard thermodynamic properties at 25°C, 1 bar (ΔG _f^o, ΔH _f^o, S ^o, C _P^o, V ^o, ω) and the coefficients of the revised Helgeson–Kirkham–Flowers equations of state were evaluated for several aqueous complexes formed by dissolved metals and either arsenate or arsenite ions. The guidelines of Shock and Helgeson (Geochim Cosmochim Acta 52:2009–2036, 1988) and Sverjensky et al. (Geochim Cosmochim Acta 61:1359–1412, 1997) were followed and corroborated with alternative approaches, whenever possible. The SUPCRT92 computer code was used to generate the log K of the destruction reactions of these metal–arsenate and metal–arsenite aqueous complexes at pressures and temperatures required by the EQ3/6 software package, version 7.2b. Apart from the AlAsO₄^o and FeAsO₄^o complexes, our log K at 25°C, 1 bar are in fair agreement with those of Whiting (MS Thesis, Colorado School of Mines, Golden, CO, 1992). Moreover, the equilibrium constants evaluated in this study are in good to fair agreement with those determined experimentally for the Ca–dihydroarsenate and Ca–hydroarsenate complexes at 40°C (Mironov et al., Russ J Inorg Chem 40:1690, 1995) and for Fe(III)–hydroarsenate complex at 25°C (Raposo et al., J Sol Chem 35:79–94, 2006), whereas the disagreement with the log K measured for the Ca–arsenate complex at 40°C (Mironov et al., Russ J Inorg Chem 40:1690, 1995) might be due to uncertainties in this measured value. The implications of aqueous complexing between dissolved metals and arsenate/arsenite ions were investigated for seawater, high-temperature geothermal liquids and acid mine drainage and aqueous solutions deriving from mixing of acid mine waters and surface waters. Electronic Supplementary Material The online version of this article () contains supplementary material, which is available to authorized users.     

Types of eruptions of Etna volcano AD 1670–2003: implications for short-term eruptive behaviour

Analysis of the historical records of Etnas eruptive activity for the past three centuries shows that, after the large 1669 eruption, a period of about 60 years of low-level activity followed. Starting from 1727, explosive activity (strombolian, lava fountaining and subplinian) at the summit crater increased exponentially to the present day. Since 1763, the frequency of flank eruptions also increased and this value remained high until 1960; afterward it further increased sharply. In fact, the number of summit and flank eruptions between 1961 and 2003 was four times greater than that of the pre-1960 period. This long-term trend of escalating activity rules out a pattern of cyclic behaviour of the volcano. We propose instead that the 1670–2003 period most likely characterises a single eruptive cycle which began after the large 1669 eruption and which is still continuing.On the basis of the eruptive style, two distinct types of flank eruptions are recognised: Class A and Class B. Class A eruptions are mostly effusive with associated weak strombolian activity; Class B eruptions are characterised by effusive activity accompanied by intense, long-lasting, strombolian and lava fountaining activity that produces copious tephra fallouts, as during the 2001 and 2002–2003 eruptions. Over the past three centuries, seven Class B eruptions have taken place with vents located mainly on the south-eastern flank, indicating that this sector of the volcano is a preferential zone for the intrusion of volatile-rich magma rising from the deeper region of the Etna plumbing system.Electronic Supplementary Material Supplementary material is available for this article at Editorial responsibility: M. Carroll