三峡库区生态环境约束下的支柱产业选择

三峡库区具有人地矛盾尖锐，生态环境脆弱，经济基础薄弱等特点，本文提出了三峡库区生态环境约束下支柱产业选择的原则，在此基础上建立了库区支柱产业选择的指标体系，运用层次分析法和投入－产出模型等定量研究方法，通过综合比选，将食品工业，以汽车摩托车零配件为主体的机电工业，以中药材深加工为主的医药工业，新型建材和生态旅游作为三峡库区今后15－20年重点发展的支柱产业，并对选择结果作了分析预测。     

基于遥感的黄河三角洲蒸散的动态分析

Evapotranspiration (ET) is an important parameter for water resource management. Compared to the traditional ET computation and measurement methods, the ET computation method based on remote sensing has the advantages of quickness, precision, raster mapping and regional scale. SEBAL, an ET computation model using remote sensing method is based on the surface energy balance equation which is a function of net radiance flux, soil heat flux, sensible heat flux and latent heat flux. The former three fluxes can be computed through the parameters retrieved from remote sensing image, then the latent heat flux can be obtained to provide energy for ET. Finally we can obtain the daily ET. In this study SEBAL was applied to compute ET in the Yellow River Delta of China where water resource faces a rigorous situation. Three Landsat TM images and meteorology data of 1999 were used for ET computation, and spatial and temporal change patterns of ET in the Yellow River Delta were analysed.     

内蒙古孟恩陶勒盖银铅锌矿床白云母Ar-Ar年龄及其意义

文章采用Ar_Ar同位素测年法对孟恩陶勒盖银铅锌矿云英岩化阶段形成的白云母进行了测试 ,获得白云母坪年龄为 (179.0± 1.5 )Ma ,等时线年龄为 (182 .3± 3.8)Ma。这组数据近似地代表了该矿床的形成年龄 ,同时也显示该地区除已知的晚侏罗_早白垩世构造_岩浆_成矿作用外 ,还有一期重要的早侏罗_中侏罗世构造_岩浆_热液成矿事件 ,这也是到目前为止所获得的大兴安岭中南段热液矿床最老的成矿年龄     

铅锌矿山开发导致的重金属在环境介质中的积累

以连续提取法和相关性分析研究了土法冶炼锌、铅锌和矿山开采导致的重金属在废渣及环境介质土壤、溪流沉积物中的积累，并分析了其环境危害性。结果显示，贵州赫章土法炼锌导致的重金属Pb、Zn、Cd在环境介质中的积累相当高。水城杉树林铅锌矿山开采引起的重金属积累则相对较低，但也明显高于背景值；土壤和沉积物中的铁矿物对重金属有强烈的固定作用。除残渣态外，Pb、Zn在土壤、炼锌废渣中主要呈铁锰氧化物结合态，沉积物中则为碳酸盐结合态。可交换态Pb、Zn含量变异较大，但在炼锌废渣、土壤中含量明显高于河流沉积物，暗示铅锌矿开发对土壤环境的潜在危害更大。     

Contemporary crustal deformation of the Chinese continent and tectonic block model

We obtain the preliminary result of crustal deformation velocity field for the Chinese continent by analyzing GPS data from the Crustal Motion Observation Network of China (CMONOC), particularly the data from the regional networks of CMONOC observed in 1999 and 2001. We delineate 9 technically active blocks and 2 broadly distributed deformation zones out of a dense GPS velocity field, and derive block motion Euler poles for the blocks and their relative motion rates. Our result reveals that there are 3 categories of deformation patterns in the Chinese continent. The first category, associated with the interior of the Tibetan Plateau and the Tianshan orogenic belt, shows broadly distributed deformation within the regions. The third category, associated with the Tarim Basin and the region east of the north-south seismic belt of China, shows block-like motion, with deformation accommodated along the block boundaries only. The second category, mainly associated with the borderland of the Tibetan Plateau, such as the Qaidam, Qilian, Xining (in eastern Qinghai), and the Diamond-shaped (in western Sichuan and Yunnan) blocks, has the deformation pattern between the first and the third, i.e. these regions appear to deform block-like, but with smaller sizes and less strength for the blocks. Based on the analysis of the lithospheric structures and the deformation patterns of the regions above, we come to the inference that the deformation modes of the Chinese continental crust are mainly controlled by the crustal structure. The crust of the eastern China and the Tarim Basin is mechanically strong, and its deformation takes the form of relative motion between rigid blocks. On the other hand, the northward indentation of the Indian plate into the Asia continent has created the uplift of the Tibetan Plateau and the Tianshan Mountains, thickened their crust, and raised the temperature in the crust. The lower crust thus has become ductile, evidenced in low seismic velocity and high electric conductivity observed. The brittle part of the crust, driven by the visco-plastic flow of the lower crust, deforms extensively at all scales. The regions of the second category located at the borderland of the Tibetan Plateau are at the transition zone between the regions of the first and the third categories in terms of the crustal structure. Driven by the lateral boundary forces, their deformation style is also between the two, in the form of block motion and deformation with smaller blocks and less internal strength.     

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.     

利用卫星测高空间技术建立数字化海洋

论述了卫星测高空间技术的主要特征、科学意义及其在军事和经济建设领域的重要价值，阐明了国内外测高卫星系统的发展现状及利用卫星测高空间技术建立数字化海洋所取得的成果，分析卫星测高目前的研究方向，提出了发展我国卫星测高空间技术以及利用该技术建立数字化海洋的一些建议。     

Confirmation of an Early Cretaceous age for the Qihulin Formation in eastern Heilongjiang Province, China: constraints from a new discovery of radiolarians

The coal-bearing, alternating marine and non-marine Longzhaogou Group in eastern Heilongjiang, northeastern China, has long been considered as Jurassic, or mainly Jurassic, in age. However, recent studies have demonstrated that the ammonites and dinoflagellate cysts are of Early Cretaceous age. This has now been confirmed by new radiolarian evidence. The radiolarian fauna recovered from the upper Qihulin Formation of the Longzhaogou Group consists of nine poorly preserved species referable to nine genera. Novixitus is a Cretaceous genus, and the specimens of Archaeodictyomitra sp. and Xitus sp. recovered resemble A. vulgaris Pessagno and X. spicularius (Aliev), respectively.     

PSP和TSP在数字制图系统开发中的运用

简要介绍了数字地图制图系统，结合在开发一个应用软件系统时所要面临的一些实际问题和困难，引入了软件工程思想中改进软件开发方式的个体软件过程(PSP)和群组软件过程(TSP)。     

2001年11月14日昆仑山口西8.1级地震前地震活动性异常及其思考s

2001年11月14日在昆仑山口西发生了8.1级地震，震中位置为90.9E、36.2N．分析表明，8.1级地震前一些主要地震活动性异常都出现了，例如空区、条带、增强、平静和震群等，且与7级大震比较，这些前兆图象的演变具有类似的过程，所不同的是8.1级地震的前兆地震活动图象涉及的区域范围更大、地震震级更高，这为特大地震的前兆识别和预报提供了依据．最后回顾了对这次大震的粗略预测，并讨论了有关大震预测的某些问题．