2003年淮河流域大水期间体积降水量的研究

针对 2 0 0 3年梅雨期淮河流域大水提出了体积降水量的概念及其计算方法 ,在计算出淮河流域和其各子流域逐日和总体积降水量的基础上 ,将体积降水量与水文站的水位和流量进行了对比分析。结果表明 :水位对累计体积降水量有较好的即时响应 ,流量对体积降水量有较好的延迟响应。另外 ,讨论了流域体积降水量的预报问题 ,用国内外数值天气预报产品和中央气象台指导预报产品 ,进行了流域体积降水量预报试验 ,并对预报结果进行了检验分析。结果表明 :在目前天气预报水平条件下 ,利用数值天气预报和中央气象台业务预报产品制作体积降水量是可行的 ,能够延长洪水预报的预见期 ;而且 ,数值天气预报产品在预报体积降水量方面有明显的优势 ,因此可以直接利用数值天气预报产品进行体积降水量的客观预报 ,为防汛工作提供重要的依据。     

柴达木盆地北缘"沙柳河岩群"的重新启用

柴北缘变质基底岩系中的表壳岩包含了岩石组合、沉积建造、变质程度和地质时代不同的两套岩石组合。其中，分布在柴达木地块的沙柳河、鱼卡河等地的以大理岩、石英岩和含石榴石英片岩为主含榴辉岩透镜体的表壳岩系，时代限定在1．0～1．3Ga，与分布在欧龙布鲁克微陆块的全吉山、德令哈等地形成时代大约2.3～2.4Ga的达肯大坂岩群有着明显的不同，后者以斜长角闪岩、石榴石英片岩和黑云变粒岩为主，并具有较强的钾质混合岩化。由于前者岩石组合清楚，沉积建造特征明显，构造意义独特，且有一定的区域分布性和可比性，所以具备建立新的岩群的条件。根据定名优先的原则，决定重新启用沙柳河岩群。     

安徽铜陵矿集区海底喷流沉积体系的流体包裹体微量元素对比

铜陵矿集区与铜-金(多金属)矿床有关的热液活动主要有两大体系。即与海西期海底喷流沉积有关的热液体系和与矽卡岩矿化有关的燕山期岩浆热液体系。查明这两类热液体系的流体包裹体特征对区域找矿和矿床成因研究都有实际意义。在包裹体岩相学研究基础上，应用ICP-MS技术和热爆提取方法，研究了新桥、冬瓜山、峙门口、铜官山、朝山等矿床具代表性的热液石英中流体包裹体的微量元素、稀土元素特征。结果表明，两类热液体系在流体包裹体特征上有较大的区别，在流体的微量元素和稀土元素特征方面也很不相同。海底喷流沉积体系的热液石英中流体包裹体与岩浆热液体系的相比。稀土总量较高，LREE／HREE比值较大，δEu不明显。且Mo／(W Sn)比值较高，反映流体中成矿物质的深源特征；Ga／T1、Rb／Cs大。Zr／Hf低，也不同于岩浆热液体系。     

铜陵地区老鸦岭层状钼矿床铅同位素组成研究

安徽铜陵老鸦岭矿床中二叠系大隆组(P2d)顶部的含矿(钼矿化)黑色页岩以及附近(立新煤矿)同一层位不含矿黑色页岩的实测铅同位素组成分别为：^206Pb/^204Pb20.20～22.37,^207Pb/^204Pb15.67～15.82,^208Pb/^204Pb38.47～38.60和^206Pb/204Pb18.83～20.80,^207Pb/^204Pb15.65～15.76,^208Pb/^204Pb38．84～39．22。对137Ma的放射成因Pb进行校正后的铅同位素组成表明，含矿黑色页岩和不含矿黑色页岩均与燕山晚期火成岩无关，老鸦岭含矿黑色页岩可能具沉积成因。对沉积(约250Ma)以来的放射成因Pb进行校正后的铅同位素组成表明：不含矿黑色页岩的Pb源自上地壳，而含矿黑色页岩的Pb(因而推测其他成矿金属)可能源于上地壳物质(与不含矿黑色页岩的Pb源相似)与下地壳物质的混合。     

时域瞬变场电磁场有限差分法

模拟电磁场在地下介质中的传播规律是理解地下介质响应的重要手段，直接应用有限差分法在时间域对二维、三维瞬变场进行数值分析是一种有效方法。应用反映电磁场基本规律的麦克斯韦方程组，导出时域场量的齐次扩散方程，对所研究的空间区域作差分离散，源作为初始条件加入，采用合适的边界条件，利用差分方程进行计算，从而得到场量的数值结果，展现瞬变场在地下随时间扩散的全过程，对电磁场的瞬态响应有更加直观的了解。     

南秦岭十里坪锑矿床成矿时代及成因的初步研究

十里坪锑矿床受赵川陆缘隆_滑构造的主滑脱拆离带的控制。矿体呈脉状赋存于韧_脆性主滑脱带上部的脆性次级断层_节理中,矿石类型主要为萤石石英辉锑矿型。围岩为太古宙_元古宙变质岩系,围岩蚀变弱。成矿流体属H2O_CO2_NaCl体系,流体包裹体盐度w(NaCleq)为3.6%～11.3%,均一温度为109～232℃,形成压力大致为800×105Pa。硫、铅同位素研究表明,矿质主要来源于变火山岩围岩;氢、氧同位素显示,成矿流体以大气降水为主,初步将该矿床定为变质岩源就地式大气降水热液矿床。矿石中萤石Sm_Nd等时线年龄为(392±24)Ma,与南秦岭北部晚古生代拗陷区热水喷流_沉积成矿时代相一致,它们都形成于秦岭微板块泥盆纪非造山裂解阶段。     

高速公路软基加固质量的瑞利波检测与小波分析技术

论述了用瑞利波检测高速公路软基加固的一些主要技术问题,应用新兴的小波分析技术,改善和提高检测的质量,并通过福宁高速公路的实际检测结果,说明了其思路和方法的正确性、实用性.     

Web-cam’s potential for collaborative activities in the Earth sciences

We report here our experiences from using easily acquired web-cam components for collaborative ventures in the Earth sciences. We have used a variety of hardware and different software. We demonstrate from various locations in the U.S.A. the feasibility of using web-cam in multitudinous activities, relevant for conducting research and knowledge dissemination. We summarize the quality of the connections from the various combinations of communicating parties. Today, web-cams can be utilized as an economical and viable means of point-to-point communication in the Earth science community. Greater bandwidth is sorely needed for activities such as multi-party conferencing on the present internet network. We propose that web-cam can be readily deployed as a web-service for facilitating collaborative research over the GRID infrastructure, using the middleware Narada-Brokering. Web-cam will play an important role in the emerging field of geoinformatics.     

Indicator Simulation Accounting for Multiple-Point Statistics

Geostatistical simulation aims at reproducing the variability of the real underlying phenomena. When nonlinear features or large-range connectivity is present, the traditional variogram-based simulation approaches do not provide good reproduction of those features. Connectivity of high and low values is often critical for grades in a mineral deposit. Multiple-point statistics can help to characterize these features. The use of multiple-point statistics in geostatistical simulation was proposed more than 10 years ago, on the basis of the use of training images to extract the statistics. This paper proposes the use of multiple-point statistics extracted from actual data. A method is developed to simulate continuous variables. The indicator kriging probabilities used in sequential indicator simulation are modified by probabilities extracted from multiple-point configurations. The correction is done under the assumption of conditional independence. The practical implementation of the method is illustrated with data from a porphyry copper mine.     

Applicability of a Backprojection Algorithm to Reconstruct Images of Subsurface Horizontal Planes for Laboratory Experiments in Electrical Resistance Tomography

This paper describes the use of a backprojection algorithm to reconstruct subsurface images of the electrical resistivity in horizontal planes parallel to the surface. The algorithm can be applied to detect buried objects such as tanks or pipes and possible leakages from them. Two imaging strategies are compared: juxtaposition of vertical planes, and 3D reconstruction from the sensitivity matrix corresponding to the entire volume whose surface is explored. The electrode arrays used for voltage measurement are the dipole–dipole array and a modified Schlumberger array. A personal computer controls current injection, electrode switching, and voltage detection. The system injects 1 kHz, 20 V peak-to-peak square waveforms, thus avoiding electrode polarization effects. Experimental laboratory measurements show that the algorithm detects localized objects such as an insulating sphere and a conductive cylinder immersed in water. Furthermore, covering half of the cylinder by a rubber sleeve to simulate a nonconductive leak, yields a distinct image for the leak. The backprojection algorithm does not need any regularization parameter and it is very fast in inverting the sensitivity matrix because it approximates the inverse matrix by its transposed. The dipole–dipole array usually yields a lower overall pixel error than the modified Schlumberger array but both allow the detection of simulated underground leaks.