Application of MODFLOW for oil reservoir simulation during the Deepwater Horizon crisis

When the Macondo well was shut in on July 15, 2010, the shut-in pressure recovered to a level that indicated the possibility of oil leakage out of the well casing into the surrounding formation. Such a leak could initiate a hydraulic fracture that might eventually breach the seafloor, resulting in renewed and uncontrolled oil flow into the Gulf of Mexico. To help evaluate whether or not to reopen the well, a MODFLOW model was constructed within 24 h after shut in to analyze the shut-in pressure. The model showed that the shut-in pressure can be explained by a reasonable scenario in which the well did not leak after shut in. The rapid response provided a scientific analysis for the decision to keep the well shut, thus ending the oil spill resulting from the Deepwater Horizon blow out.     

Some challenges of an "upside down" nitrogen budget--science and management in Greenwich Bay, RI (USA)

When nutrients impact estuarine water quality, scientists and managers instinctively focus on quantifying and controlling land-based sources. However, in Greenwich Bay, RI, the estuary opens onto a larger and more intensively fertilized coastal water body (Narragansett Bay). Previous inventories of nitrogen (N) inputs to Greenwich Bay found that N inputs from Narragansett Bay exceeded those from the local watershed, suggesting that recent efforts to reduce local watershed N loads may have little effect on estuarine water quality. We used stable isotopes of N to characterize watershed and Narragansett Bay N sources as well as the composition of primary producers and consumers throughout Greenwich Bay. Results were consistent with previous assessments of the importance of N inputs to Greenwich Bay from Narragansett Bay. As multiple N sources contribute to estuarine water quality, effective management requires attention to individual sources commensurate with overall magnitude, regardless of the political complications that may entail.     

How useful are port surveys focused on target pest identification for exotic species management?

Monitoring surveys are an important tool for detecting new arrivals of exotic species, for documenting patterns of invasion, and exotic species impacts. Faced with time and cost constraints, these surveys are increasingly focused on lists of target pest species, identified as being most likely to arrive and cause significant harm. We used the national survey of Australian international ports for introduced marine pests as a case study to assess: (1) the taxonomic rigor of surveys focused on detection of target species; and (2) how the ability of port surveys to inform invasion patterns is dependent on taxonomic approach. Our analysis of the 46 available reports revealed common sub-optimal taxonomic practices that compromised their utility to identify abiotic conditions that are good predictors of biological invasion. Thus, although surveys for target species may provide information on the distribution of a handful of species, they may fail to do much else.     

Environmental pollution in the Gulf of Guinea--a regional approach

Environmental pollution in the Gulf of Guinea (GOG) coastal zone has caused eutrophication and oxygen depletion in the lagoon systems, particularly around the urban centres, resulting in decreased fish (reproduction) levels and waterborne diseases. A pollution sources assessment was undertaken by six countries in the region as a first step in defining a region-wide Environmental Management Plan. Results show that households produce 90% of solid waste. Industry, however, is responsible for substantial amounts of hazardous waste, specifically the Nigerian petroleum industry. The latter is also responsible for the spilling of large amounts of oil. BOD load from industrial effluents is slightly larger than domestic loads in the industrialised coastal zone. Wastewater treatment systems are either absent or inadequate. Apart from large-scale gas flaring in Nigeria, air pollution, in terms of COx, HC, NOx and SO2 emissions, is contributed mainly by traffic. Particulates, originate mainly from industries and domestic biomass burning.     

Stream bottom resistivity tomography to map ground water discharge

This study investigates the effectiveness of direct current electrical resistivity as a tool for assessing ground water/surface water interactions within streams. This research has shown that patterns of ground water discharge can be mapped at the meter scale, which is important for understanding stream water quality and ecosystem function. Underwater electrical resistivity surveys along a 107-m stream section within the Burd Run Watershed in South Central Pennsylvania identified three resistivity layers: a resistive (100 to 400 Ωm) surface layer corresponding to the streambed sediments, a conductive (20 to 100 Ωm) middle layer corresponding to residual clay sediments, and a resistive (100 to 450 Ωm) bottom layer corresponding to the carbonate bedrock. Tile probing to determine the depth to the bedrock and resistivity test box analysis of augered sediment samples confirmed these interpretations of the resistivity data. Ground water seeps occurred where the resistivity data showed that the residual clays were thinnest and bedrock was closest to the streambed. Plotting the difference in resistivity between two surveys, one conducted during low-stage and the other during high-stage stream conditions, showed changes in the conductivity of the pore fluids saturating the sediments. Under high-stream stage conditions, the top layer showed increased resistivity values for sections with surface water infiltration but showed nearly constant resistivity in sections with ground water seeps. This was expressed as difference values less than 50 Ωm in the area of the seeps and greater than 50 Ωm change for the streambed sediments saturated by surface water. Thus, electrical resistivity aided in characterizing ground water discharge zones by detecting variations in subsurface resistivity under high- and low-stream stage conditions as well as mapping subsurface heterogeneities that promote these exchanges.     

PCD在钻进业的应用

本文简要介绍了聚晶金刚石（PCD）的特性及其发展过程,并分别列出了其在钻进业中的应用领域,包括石油、天然气钻进和地质与矿山钻进,阐述了这两种钻进领域对PCD钻头的不同要求。     

Estimating aquifer properties from the water level response to Earth tides

Water level fluctuations induced by tidal strains can be analyzed to estimate the elastic properties, porosity, and transmissivity of the surrounding aquifer material. We review underutilized methods for estimating aquifer properties from the confined response to earth tides. The earth tide analyses are applied to an open well penetrating a confined carbonate aquifer. The resulting range of elastic and hydraulic aquifer properties are in general agreement with that determined by other investigators for the area of the well. The analyses indicate that passive monitoring data from wells completed in sufficiently stiff, low porosity formations can provide useful information on the properties of the surrounding formation.